Accessories

• Broad 10 MHz to 6 GHz frequency range enables use in a wide variety of applications
• Wide dynamic range of -63 to +20 dBm
• Integrated power sensor eliminates the need to carry a separate power sensor
• Internal power reference enables self-calibration
• Absolute accuracy as good as ±0.21 dB
• Powered from batteries, an AC-DC converter module, or a computer via a USB interface

The V3500A Handheld RF Power Meter is a compact, portable instrument designed for accurate RF power measurements in both field and manufacturing environments. Offering absolute accuracy as good as ±0.21 dB, a wide frequency range of 10 MHz to 6 GHz, and a measurement range from -63 to +20 dBm, the V3500A is well-suited for a broad range of RF applications.

Its built-in power sensor eliminates the need to carry both a separate instrument and a sensor module. Truly portable, the V3500A fits easily into your hand or toolkit, with optional accessories such as a belt loop holster and a carrying case with a shoulder strap. For maximum flexibility, it can be powered by batteries, an AC-DC converter module, or via a USB connection to a computer.

MultiGBASE-T1 Media Converter

The Keysight APM2000E enables you to convert the Ethernet physical layer from MultiGBASE-T1 to MultiGBASE-T.  

• Utilizes the Marvel MV-Q3244 PHY for the 2.5/5/10GBASE-T1 physical layer.
• Compliant with OPEN Alliance’s TC10 Automotive Ethernet Sleep/Wake-up requirements. 
• Intuitive LED indicators:
  • PHY configuration, link status, and network activity 
  • Bar graph display of MultiGBASE-T1 Signal Quality Indicator (SQI) in real-time 
• Membrane buttons enable device configuration without software: 
  • Switch between 2.5G, 5G, and 10G link speeds 
  • Select the MultiGBASE-T1 PHY clock configuration 
• The converter uses the H-MTD connection system designed for MultiGBASE-T1.
• Ruggedized USB Type-C connector for device configuration and firmware updates. 
• Order APM2000E-CLK for external clock input. 

The APM2000E media converter is required for Automotive Ethernet MultiGBASE-T1 receiver testing with Keysight AE6920R software.   

Use with the following solution: AE6000R.

• Provide a single RF output for full frequency coverage from 9 kHz to 7.2 GHz and 160 MHz modulation bandwidth
• Control from an MXG/EXG front panel as usual and automate the test systems using the same SCPI commands via LAN, GPIB, or USB
• Generate an 802.11ax 160 MHz bandwidth signal at 7.2 GHz and achieve excellent EVM performance < -47 dB (0.45%) for output power up to +5 dBm

The N5182BX07 Frequency Extender extends any N5182B MXG or N5172B EXG with Option 506 to cover the 802.11ax bands and 5G unlicensed bands up to 7.2 GHz with exceptional error vector magnitude (EVM). Take your devices and designs to the limit with the N5182BX07 Frequency Extender.

The Keysight APM1000E enables you to convert from 100 / 1000BASE-T1 automotive Ethernet to standard 10 / 100 / 1000 Ethernet. This process is useful when connecting a PC to a 100 / 1000BASE-T1 host or switch.

• complies with 100 / 1000BASE-T1 standard via Marvell 88Q2112 PHY
  
• acts as a media converter to enable a PC to interact with automotive Ethernet ECUs
• lets you simulate nodes or perform direct diagnostics
• includes programmable membrane label with LEDs to show PHY and network status
• allows easy selection of the data rate (100BASE-T1 or 1000BASE-T1) as well as the PHY clock mode with front-panel buttons
  

• DC to 5 GHz frequency range
• Type-N male to type-N female connectors

The Keysight 11501A is a 180 cm (71 in) type-N male to type-N female cable assembly with a frequency range of DC to 5 GHz. 

• DC to 5 GHz frequency range
• Type-N male to type-N female connectors

For more information about cable assembly, please visit Cable Assemblies

• Frequency range of 10 MHz to 6 GHz
• USB connectivity with wide dynamic range of -70 to +26 dBm for small signal measurements
• Fast real time measurement of 50,000 readings/sec
• Real-time measurement with zero dead time to ensure every single continuous pulse is measured
• Average mode time-selectivity function allows full dynamic range for average and time selectivity average power measurements
• Internal zero and automatic calibration saves time and reduces measurement uncertainty
• A BenchVue software license (BV0007B) is now included with your instrument. BenchVue makes it simple to connect, control instruments, and automate test sequences

Accurately measure any modulated signal with the Keysight Technologies, Inc. U/L2050/60 X-Series wide dynamic range power sensors. The USB/LAN connectivity models come with wide dynamic range, covering -70 to +26 dBm. This sensor offers very accurate and repeatable power measurements for any modulated signal and comes with super-fast measurement speed of 50,000 readings/sec, which enables higher manufacturing throughput. Users can also save time and reduce measurement uncertainty with the internal zero and calibration function. The U/L2050/60 X-Series is supported by the Keysight BenchVue software. BenchVue makes it easy to control your power meter to log data and visualize measurements in a wide array of display options without any programming. Simply connect the sensor to your PC installed BenchVue BV0007B Power Meter/Sensor Control and Analysis app to perform average power measurement and analysis.

Learn more about Keysight LAN and USB Power Sensors

• DC to 6.0 GHz frequency range
• Type-N male to type-N male connectors
• 58 cm (23 in) length (nom)
• Insertion Loss 0.73 dB Max
• Return Loss 10.50 dB Min

The Keysight 11500B is a 58 cm (23 in) type-N male to type-N male cable assembly with a frequency range of DC to 6.0 GHz.

• DC to 6.0 GHz frequency range
• Type-N male to type-N male connectors
• 58 cm (23 in) length (nom)

 For more information about cable assembly, please visit Cable Assemblies

• DC to 6.0 GHz frequency range
  
• Type-N male to type-N male connectors
• 58 cm (23 in) length (nom)
• Insertion loss at 0.73 dB maximum
• Return loss at 10.50 dB minimum

The Keysight 11500B cable assembly is 58 cm (23 in) type-N male to type-N male with a frequency range of DC to 6.0 GHz

• DC to 6.0 GHz frequency range
• Type-N male to type-N male connectors
• 58 cm (23 in) length (nom)

• DC to 6.0 GHz frequency range
• Type-N male to type-N male connectors
• 58 cm (23 in) length (nom)
• Insertion loss at 0.73 dB maximum
• Return loss at 10.50 dB minimum

The Keysight 11500B cable assembly is 58 cm (23 in) type-N male to type-N male with a frequency range of DC to 6.0 GHz

• DC to 6.0 GHz frequency range
• Type-N male to type-N male connectors
• 58 cm (23 in) length (nom)

The Keysight AE6090A MultiGBASE-T1 noise injection fixture provides reliable and convenient noise injection. A coupling mechanism is necessary to inject noise from the Keysight arbitrary waveform generator (AWG) into the automotive Ethernet multiGBASE-T1 link. The AWG, amplifier, and coupling circuit must collectively ensure that the noise levels meet the receiver's input noise specifications.

• Validates the performance of automotive Ethernet receivers for 2.5G, 5G, and 10GBASE-T1 links, specific to MultiGBASE-T1 receiver testing. 
• Ensures accurate noise injection from the AWB into the Ethernet link.
• Provides dependable and high-frequency connections with minimal signal loss for all subminiature version A (SMA) connectors. 
• Requires two AE6960A MDI heads (H-MTD to SMA) and two SMA (primary)-to-SMA (primary) adapters to connect to the H-MTD cable. 

The MultiGBASE-T1 noise injection fixture provides a convenient method to couple noise generated by an AWG to your DUT, enabling you to integrate the necessary noise profiles into the channel. This fixture features a compact and durable automotive-grade housing with coax connectors.

The AE6090A fixture is necessary for automotive Ethernet 2.5 / 5 / 10GBASE-T1 receiver testing AE6920R software.  

The AE6941A Automotive Ethernet Electrical Test Fixture provides easy access to automotive Ethernet electrical signals so you can perform conformance testing and device characterization quickly and easily.

You can use this breakout board with the AE6942A, AE6943A, and AE6960A adapters to support the Keysight AE6900T, AE6900R, and AE6900L automotive Ethernet electrical conformance applications to provide fast and accurate design validation and debug of transmit receive and link segment signals.

Features

• Complete 100BASE-T1 automotive Ethernet signal access for conformance testing and characterization
• Compliant with IEEE 802.3bw and IEEE 802.3b
• Flexible subMiniature A (SMA) connections for ease-of-use
• Versatile adapter boards available for various connector types including Mini-50, MATEnet and H-MTD

Supports standards 

• IEEE 802.3bw 100 Mb/s
• IEEE 802.3bp 1000 Mb/s
• IEEE 802.3ch multigigabit

The Keysight 3.5mm SMA Connector to Solderable Open Automotive Adapter offers generic solder-down flexibility to connect twisted-pair automotive cables to the measurement instrument or device under test. Compatible with RPC, it can transmit up to 1 Gbps, according to the IEEE 1000BASE-T1 standard. Designed for the DC to 10 GHz frequency range, this fixture is suitable for automotive Ethernet 10BASE-T1S, 100BASE-T1, and 1000BASE-T1.

• Adapt twisted-pair bare wires to SMA for easy connection to an oscilloscope or other test equipment.
• Use alone or with the Keysight AE6941A automotive test fixture.
• Achieve measurement accuracy and versatility for automotive media-dependent interface (MDI) adaption.