What are you looking for?
Suggested searches
No product matches found - System Exception
Matched content
N7818A X-Series EMI Receiver Calibration Application
A Keysight recomenda usar a versão mais atual, que inclui as correções de bugs e arquivos de segurança mais atualizados disponíveis.
| Data de lançamento | Versão | Descrição da Versão |
|---|---|---|
| 2025-07-17 | E.15.04 | Updated the measurement uncertainty of Q-P Detector Variation With Pulse Repetition Frequency performance test - Fixed the issue when the Freq Resp below 3.6 GHz Preamp On and Off performance test failed by updating the Freq Resp adjustments (recommended/PNA solution) - Fixed the issue when the dB results merge failed when attempting to run an upgrade for this application on a stand-alone server - Fixed the issue when the IF Frequency Response Adjustment was not responsive when backing up the original calibration data |
| Data de lançamento | Versão |
|---|---|
| 2025-07-17 | E.15.04 |
| Version Description |
|---|
| Updated the measurement uncertainty of Q-P Detector Variation With Pulse Repetition Frequency performance test - Fixed the issue when the Freq Resp below 3.6 GHz Preamp On and Off performance test failed by updating the Freq Resp adjustments (recommended/PNA solution) - Fixed the issue when the dB results merge failed when attempting to run an upgrade for this application on a stand-alone server - Fixed the issue when the IF Frequency Response Adjustment was not responsive when backing up the original calibration data |
Como Baixar
- Close all applications.
- Download application .exe file to the PC desktop.
Como Instalar
- Download the Setup.exe file to the PC desktop.
- Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
- Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.
Licenciamento
- Requires a License
To obtain a key contact your local Keysight Technologies Sales Representative.
Documentação de suporte
Installs on: PC
Sistema Operacional
- Windows 10
Minimum Requirements to Run TME N78xxA Application Software:
- TME revision E.03.91 or higher
- Check individual N78xxA Application’s ReadMe files for specific requirements
Pré-requisitos
Instrumentos Compatíveis
- N9038A, N9038B, N9048B
Como Baixar
- Close all applications.
- Download application .exe file to the PC desktop.
Como Instalar
- Download the Setup.exe file to the PC desktop.
- Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
- Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.
Licenciamento
- Requires a License
To obtain a key contact your local Keysight Technologies Sales Representative.
Documentação de suporte
Installs on: PC
Sistema Operacional
- Windows 10
Minimum Requirements to Run TME N78xxA Application Software:
- TME revision E.03.91 or higher
- Check individual N78xxA Application’s ReadMe files for specific requirements
Pré-requisitos
Instrumentos Compatíveis
- N9038A, N9038B, N9048B
Como Baixar
- Close all applications.
- Download application .exe file to the PC desktop.
Como Instalar
- Download the Setup.exe file to the PC desktop.
- Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
- Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.
Licenciamento
- Requires a License
To obtain a key contact your local Keysight Technologies Sales Representative.
Documentação de suporte
Installs on: PC
Sistema Operacional
- Windows 10
Minimum Requirements to Run TME N78xxA Application Software:
- TME revision E.03.91 or higher
- Check individual N78xxA Application’s ReadMe files for specific requirements
Pré-requisitos
Instrumentos Compatíveis
- N9038A, N9038B, N9048B
Como Baixar
- Close all applications.
- Download application .exe file to the PC desktop.
Como Instalar
- Download the Setup.exe file to the PC desktop.
- Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
- Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.
Licenciamento
- Requires a License
To obtain a key contact your local Keysight Technologies Sales Representative.
Documentação de suporte
Installs on: PC
Sistema Operacional
- Windows 10
Minimum Requirements to Run TME N78xxA Application Software:
- TME revision E.03.91 or higher
- Check individual N78xxA Application’s ReadMe files for specific requirements
Pré-requisitos
Instrumentos Compatíveis
- N9038A, N9038B, N9048B
SHOW MORE