Choose a country or area to see content specific to your location
What are you looking for?
-
-
3D Interconnect Designer
3D Interconnect Designer provides a flexible modeling and optimization environment for any advanced interconnect structure, including chiplets, stacked die, packages, and PCBs.
-
Save up to 50% on an XR8 Oscilloscope
Get faster digital validation for less with a trade-in.
-
Discover Keysight AI Data Center Builder
Emulate every part of your data center infrastructure. Emulate Anything. Optimize Everything.
-
-
Introducing AI-Enhanced Packet Brokers
With extra memory and storage, these enhanced NPBs run Keysight's AI security and performance monitoring software and AI stack.
-
Precision In-Circuit Testing for Production
Achieve fast, accurate board-level testing with robust inline and offline ICT designed for modern manufacturing.
-
Accelerate Your Innovation Engine
Explore curated support plans, prioritized to keep you innovating at speed.
-
448 Gb/s Waveform Generation
Achieve 200+ Gbaud multi-level modulated signals with high-speed AWGs for digital and optical standards.
-
Stream 120 MHz I/Q Data to Your Laptop in the FieldPinpoint interference with post-processing spectrum management software in the lab.
Find the Right ATE Power SolutionUse this selector tool to quickly identify the best power supply for your aerospace and defense ATE requirements.
-
- Solutions
-
Authoritative application notes, data sheets, reference designs, and test procedures to accelerate design and validation decisions.
FeaturedHands‑on bootcamps that teach system design, test methods, and production workflows engineers can apply immediately.
Success Stories
HPE Juniper Networking Builds Next-Gen AI Infrastructure -
Quick access to support related self-help tasks.
Additional content to support your product needs.
Do more with Keysight ServicesExplore services to accelerate every step of your innovation journey.
Accessories
Explore the complete portfolio of Keysight accessories designed to complement and extend your instruments. Use the filters below to quickly find compatible accessories such as modules, cables, adapters, and other system components to configure, expand, and optimize your test system for your specific measurement needs.
Showing 12 of 56
No Filter available
No Filter available
No Filter available
Kelvin Probe Set
Reduce ground-related errors and contact resistance through gold-plated flat tweezers and special gripping surfaces
Reduce ground-related errors and contact resistance through gold-plated flat tweezers and special gripping surfaces
Kelvin Probe Set
11059A
Reduce ground-related errors and contact resistance through gold-plated flat tweezers and special gripping surfaces
- Maximum voltage: 42 V
- Termination: 5 single banana plugs (4-wire measurements plus ground)
- Length: cable is 0.8 meters (31.5 inches)
The Keysight kelvin probe set consists of two gold-plated flat tweezers with special gripping surfaces. This design assures a very precise contact to the component and very precise measurements. The ground guard connector removes ground-related errors. The gold plating helps to reduce the contact resistance between the surfaces of the test probe and the lead of the component being measured - reducing overall error!
The Keysight 11059A is compatible with the Keysight 34460A, 34461A, 34401A, 3458A, 34410A, 34411A, 34465A, 34470A digital multimeters and B2900 series precision source / measure units.
Accessory Pouch
Store manuals, power cords, or other DMM or waveform generator accessories; fits most 2-slot, half-rack sized instruments.
Store manuals, power cords, or other DMM or waveform generator accessories; fits most 2-slot, half-rack sized instruments.
Accessory Pouch
34162A
Store manuals, power cords, or other DMM or waveform generator accessories; fits most 2-slot, half-rack sized instruments.
- Size: 9 inches x 8 inches x 1½ inches
- Material: Cordura®
- Closure: zipper
- Attachment: nylon straps wrap around instrument with velcro closures
The Keysight 34162A Cordura® pouch fits on top of the Keysight 34460A, 34461A, 34401A, 33210A, and 33220A Function / Arbitrary Waveform Generators and the 34405A, 34410A, and 34411A Digital Multimeters. Its dual zippered compartments can hold manuals, power cords and other accessories. It will fit most 2-slot, half rack sized Keysight instruments.
Keysight offers a variety of accessories for digital multimeters. Learn more about Keysight new digital multimeter accessories.
Accessory Pouch
Store manuals, power cords, or other DMM or DAQ accessories; fits on top of most 2-slot, half-rack sized Keysight instruments
Store manuals, power cords, or other DMM or DAQ accessories; fits on top of most 2-slot, half-rack sized Keysight instruments
Accessory Pouch
34161A
Store manuals, power cords, or other DMM or DAQ accessories; fits on top of most 2-slot, half-rack sized Keysight instruments
The Keysight 34161A Cordura® pouch fits on top of the Keysight 34401A and 34420A multimeters, as well as the 34970A and 34972A data acquisition / switch unit. Its dual-zippered compartments can hold manuals, power cords, and other accessories. It will fit most 2-slot, half-rack-sized Keysight instruments.
- Size: 11 inches x 8 inches x 1½ inches
- Material: Cordura®
- Closure: zipper
- Attachment: nylon straps wrap around instrument with velcro closures
- Keysight 34401A and 34420A DMMs
- Keysight 34970A data acquisition / switch unit
- Keysight 33120A and 33250A sources
- Keysight 53131A, 53132A, and 53181A counters
- Most E3600 power supplies and other 2-slot, half-rack-sized Keysight products
Dual Lock Link Kit
Use with the 34194A 2U Dual Flange Kit to mount two Keysight System II (half-width, 2U height) instruments side by side.
Use with the 34194A 2U Dual Flange Kit to mount two Keysight System II (half-width, 2U height) instruments side by side.
Dual Lock Link Kit
34194A
Use with the 34194A 2U Dual Flange Kit to mount two Keysight System II (half-width, 2U height) instruments side by side.
The Keysight 34194A (5061-8769) dual lock link kit is recommended for side-by-side combinations and includes links for instruments of different depths. This kit can be used with the 34191A 2U Dual Flange Kit to mount two Keysight System II (half-width, 2U height - 88.1mm) instruments side-by-side.
The Keysight 34194A dual lock link kit is compatible with the Keysight 34460A, 34461A, 34465A, 34470A DMMs, the Keysight 34970A/34972A Data Acquisition/Switch Units, the Keysight 531xxA and 53200 Series frequency counters, the Keysight 33500 and 33600 series function generators, most E3600 power supplies and other 2-slot, half rack sized Keysight products.
Learn more about Data Acquisition Accessories and Options
Precision Electronic Test Leads
Use these small, light weight, leads with small components and dense circuit boards.
Use these small, light weight, leads with small components and dense circuit boards.
Precision Electronic Test Leads
34133A
Use these small, light weight, leads with small components and dense circuit boards.
- Termination: right-angle shrouded banana plugs
- Maximum current: 3 A
- Rating: 1000 V CAT II
- Length: 1.2 meters (48 inches)
The Keysight 34133A precision electronic test leads are designed specifically for working with small components and dense circuit boards. Each kit includes two test leads (one red and one black).
For more information about Keysight test leads and probes for multimeters, please visit Multimeter Test Leads and Probes.
Upgrade - Accessory Kit for 34460A - Test Leads, USB Cable
3446ACCU provides the accessory kit for the 34460A, including the test leads and USB cable.
3446ACCU provides the accessory kit for the 34460A, including the test leads and USB cable.
Upgrade - Accessory Kit for 34460A - Test Leads, USB Cable
3446ACCU
3446ACCU provides the accessory kit for the 34460A, including the test leads and USB cable.
3446ACCU provides the full accessory kit for the 34460A Truevolt DMM.
Option available for the following models: 34460A
Order as: 3446ACCU
Upgrade contents:
- 34138A Test Lead Set with probes, fine tip probes, SMT grabbers, and mini grabber attachments
- USB cable
Adjustments required: No
Additional requirements: No
Installed by, estimated installation time: No installation required
Low Thermal Input Cable
Use this 1.2-m shielded, 4-conductor connector only with the 34420A Micro Ohm Meter; terminated in copper spade lugs.
Use this 1.2-m shielded, 4-conductor connector only with the 34420A Micro Ohm Meter; terminated in copper spade lugs.
Low Thermal Input Cable
34102A
Use this 1.2-m shielded, 4-conductor connector only with the 34420A Micro Ohm Meter; terminated in copper spade lugs.
- Length: 1.2 meters (48 inches)
- Termination: copper spade lugs/34420A mating connector
The Keysight 34102A is a low-thermal input cable for the 34420A. It consists of a custom mating connector attached to a 1.2 m shielded 4-conductor cable terminated in copper spade lugs. It ships with the 34420A.
The Keysight 34102A is only compatible with the Keysight 34420A.
For more information about Keysight test leads and probes for multimeters, please visit Multimeter Test Leads and Probes.
Calibration Short for Digital Multimeters
Use this set of two connectors to apply a short to the input connectors of your digital multimeter
Use this set of two connectors to apply a short to the input connectors of your digital multimeter
Calibration Short for Digital Multimeters
34172B
Use this set of two connectors to apply a short to the input connectors of your digital multimeter
- Short: #24 AWG plated copper wire
- Terminals: low-thermal copper alloys
- Termination: five shrouded banana plugs
- Quantity: 2
The Keysight 34172B digital multimeter calibration short is a set of two shorts which provide a convenient and reliable method to apply a short to the input connectors of the multimeter. Terminals are made of low-thermal copper alloys to minimize thermally-induced voltages caused by dissimilar metals.
The Keysight 34172A is compatible with the Keysight 34460A, 34461A, 34401A, 34410A, 34411A, and L4411A digital multimeters.
Low Thermal Input Connector
Design custom input connections on your 34420A Micro Ohm Meter with this mating connector
Design custom input connections on your 34420A Micro Ohm Meter with this mating connector
Low Thermal Input Connector
34104A
Design custom input connections on your 34420A Micro Ohm Meter with this mating connector
- Wire: #22 to #28 AWG recommended
- Termination: 34420A mating connector
The Keysight 34104A is a low-thermal input connector that mates with the 34420A. It allows a user to design custom input connections.
The Keysight 34104A is only compatible with the 34420A.
Kelvin Clip Set
Create custom Kelvin probes for 4-wire resistance measurements; set contains only the two gold-plated clips
Create custom Kelvin probes for 4-wire resistance measurements; set contains only the two gold-plated clips
Kelvin Clip Set
11062A
Create custom Kelvin probes for 4-wire resistance measurements; set contains only the two gold-plated clips
- Probe size: maximum jaw opening is 7.9 mm (0.31 in.)
- Maximum wire size: #18 AWG
- Maximum current: 10 A
- Maximum voltage: 42 V dc
The Keysight 11062A Kelvin clip set consists of two gold-plated clip contacts for creating custom Kelvin probes for 4-wire resistance measurements. The wires are attached to the clips by slotted screws. One jaw provides the current path for the source, and the other provides the current path for the sense. The kit contains only the two clips.
The Keysight 11062A is compatible with the Keysight 34460A, 34461A, 34401A, 3458A, 34420A, 34410A and 34411A digital multimeters as well as the Keysight 34970A and 34792A Data Acquisition/Switch Unit.
For more information about Keysight test leads and probes for multimeters, please visit Multimeter Test Leads and Probes.
3U Rack Mount Kit for Opt 1 CM
Use this adapter kit to mount a single ½ module or two ¼ module width standard System II instruments.
Use this adapter kit to mount a single ½ module or two ¼ module width standard System II instruments.
3U Rack Mount Kit for Opt 1 CM
34193A
Use this adapter kit to mount a single ½ module or two ¼ module width standard System II instruments.
- Rack Cabinet: System II or System II Plus
The Keysight 34193A (5063-9243) rackmount adapter kit is used to mount a single ½ module or two ¼ module width standard System II instruments 3U 132.6mm high instrument such as the Keysight E3631A to E3634A and E3646A to E3649A products.
3U Dual Flange Kit
Secure the instrument to the front of a System II cabinet; combine with the 34194A Dual Lock Link Kit to mount two System II instruments side by side
Secure the instrument to the front of a System II cabinet; combine with the 34194A Dual Lock Link Kit to mount two System II instruments side by side
3U Dual Flange Kit
34192A
Secure the instrument to the front of a System II cabinet; combine with the 34194A Dual Lock Link Kit to mount two System II instruments side by side
- Rack Cabinet: System II or System II Plus works with any standard System II 3U 132.6mm high instrument such as the Keysight 6811B, 6812B, and 6813B.
The Keysight 34192A (5063-9214) dual rackmount flange kit secures the instrument to the front of the System II cabinet. This kit can be used with the 34194A Dual Lock Link Kit to mount two Keysight System II (half-width, 3U height) instruments side-by-side.
The Keysight 34192A dual rackmount flange kit is compatible with any standard System II 3U 132.6mm high instrument such as the Keysight 6811B, 6812B, and 6813B.
Please look at the link for more information about Keysight Performance AC Power supplies and related accessories.
