Choose a country or area to see content specific to your location
What are you looking for?
-
-
Integrated Physics Suite
Bridging design and physical testing to evaluate drop, impact, shock, and vibration compliance before hardware exists.
-
Buy an Expert Oscilloscope, Boost Your Bandwidth
Unlock your free upgrade to the next bandwidth tier.
-
End-to-End Validation for AI Data Center
Strengthen 1.6T network reliability for AI-scale workloads from transceivers to interconnects.
-
Take On Complex MIMO Signals
Pair Keysight VSA software with the new XA5 signal analyzer for advanced visualization, demodulation, and analysis — start your 30-day trial today.
-
Introducing AI-Enhanced Packet Brokers
With extra memory and storage, these enhanced NPBs run Keysight's AI security and performance monitoring software and AI stack.
-
Accelerate Semiconductor Innovation
Explore end-to-end workflows spanning IC design, validation, wafer test, and photonics.
-
Accelerate Your Innovation Engine
Explore curated support plans, prioritized to keep you innovating at speed.
-
448 Gb/s Waveform Generation
Achieve 200+ Gbaud multi-level modulated signals with high-speed AWGs for digital and optical standards.
-
The Right Connection Makes the Measurement
Maximize accuracy and performance with precision accessories engineered for Keysight instruments.
Analyze Complex RF Signals FasterExplore dual-channel and ultra-wideband signal analysis for demanding RF workflows.
Digital Validation. Faster.Get faster, clearer insights with our new multicore, 12-bit oscilloscope up to 33 GHz. Trade in your old oscilloscope and get credit toward a new XR8.
-
- Solutions
-
Authoritative application notes, data sheets, reference designs, and test procedures to accelerate design and validation decisions.
FeaturedHands‑on bootcamps that teach system design, test methods, and production workflows engineers can apply immediately.
Success Stories
HPE Juniper Networking Builds Next-Gen AI Infrastructure - Buy
-
Quick access to support related self-help tasks.
Additional content to support your product needs.
Do more with Keysight ServicesExplore services to accelerate every step of your innovation journey.
Accessories
Explore the complete portfolio of Keysight accessories designed to complement and extend your instruments. Use the filters below to quickly find compatible accessories such as modules, cables, adapters, and other system components to configure, expand, and optimize your test system for your specific measurement needs.
Showing 12 of 56
-
5
-
52
No Filter available
Kelvin Probe Set
Reduce ground-related errors and contact resistance through gold-plated flat tweezers and special gripping surfaces
Reduce ground-related errors and contact resistance through gold-plated flat tweezers and special gripping surfaces
Kelvin Probe Set
11059A
Reduce ground-related errors and contact resistance through gold-plated flat tweezers and special gripping surfaces
- Maximum voltage: 42 V
- Termination: 5 single banana plugs (4-wire measurements plus ground)
- Length: cable is 0.8 meters (31.5 inches)
The Keysight kelvin probe set consists of two gold-plated flat tweezers with special gripping surfaces. This design assures a very precise contact to the component and very precise measurements. The ground guard connector removes ground-related errors. The gold plating helps to reduce the contact resistance between the surfaces of the test probe and the lead of the component being measured - reducing overall error!
The Keysight 11059A is compatible with the Keysight 34460A, 34461A, 34401A, 3458A, 34410A, 34411A, 34465A, 34470A digital multimeters and B2900 series precision source / measure units.
Accessory Pouch
Store manuals, power cords, or other DMM or waveform generator accessories; fits most 2-slot, half-rack sized instruments.
Store manuals, power cords, or other DMM or waveform generator accessories; fits most 2-slot, half-rack sized instruments.
Accessory Pouch
34162A
Store manuals, power cords, or other DMM or waveform generator accessories; fits most 2-slot, half-rack sized instruments.
- Size: 9 inches x 8 inches x 1½ inches
- Material: Cordura®
- Closure: zipper
- Attachment: nylon straps wrap around instrument with velcro closures
The Keysight 34162A Cordura® pouch fits on top of the Keysight 34460A, 34461A, 34401A, 33210A, and 33220A Function / Arbitrary Waveform Generators and the 34405A, 34410A, and 34411A Digital Multimeters. Its dual zippered compartments can hold manuals, power cords and other accessories. It will fit most 2-slot, half rack sized Keysight instruments.
Keysight offers a variety of accessories for digital multimeters. Learn more about Keysight new digital multimeter accessories.
Accessory Pouch
Store manuals, power cords, or other DMM or DAQ accessories; fits on top of most 2-slot, half-rack sized Keysight instruments
Store manuals, power cords, or other DMM or DAQ accessories; fits on top of most 2-slot, half-rack sized Keysight instruments
Accessory Pouch
34161A
Store manuals, power cords, or other DMM or DAQ accessories; fits on top of most 2-slot, half-rack sized Keysight instruments
The Keysight 34161A Cordura® pouch fits on top of the Keysight 34401A and 34420A multimeters, as well as the 34970A and 34972A data acquisition / switch unit. Its dual-zippered compartments can hold manuals, power cords, and other accessories. It will fit most 2-slot, half-rack-sized Keysight instruments.
- Size: 11 inches x 8 inches x 1½ inches
- Material: Cordura®
- Closure: zipper
- Attachment: nylon straps wrap around instrument with velcro closures
- Keysight 34401A and 34420A DMMs
- Keysight 34970A data acquisition / switch unit
- Keysight 33120A and 33250A sources
- Keysight 53131A, 53132A, and 53181A counters
- Most E3600 power supplies and other 2-slot, half-rack-sized Keysight products
Dual Lock Link Kit
Use with the DAQA191A 2U Dual Flange Kit to mount two Keysight System II instruments side by side.
Use with the DAQA191A 2U Dual Flange Kit to mount two Keysight System II instruments side by side.
Dual Lock Link Kit
DAQA194A
Use with the DAQA191A 2U Dual Flange Kit to mount two Keysight System II instruments side by side.
The Keysight DAQA194A (5061-8769) dual lock link kit is recommended for side-by-side combinations and includes links for instruments of different depths. This kit can be used with the DAQA191A 2U Dual Flange Kit to mount two Keysight System II (half-width, 2U height - 88.1mm) instruments side-by-side.
The Keysight DAQA194A (5061-8769) dual lock link kit is compatible with the Keysight DAQ970A, 34970A, and 34972A data acquisition systems, the Keysight 34460A, 34461A, 34465A, 34470A, and 34420A DMMs, the Keysight 33500B and 33600A Series Arbitrary Waveform Generator.
For more information about DAQ, please visit Keysight data acquisition - DAQ page.
Dual Lock Link Kit
Use with the 34194A 2U Dual Flange Kit to mount two Keysight System II (half-width, 2U height) instruments side by side.
Use with the 34194A 2U Dual Flange Kit to mount two Keysight System II (half-width, 2U height) instruments side by side.
Dual Lock Link Kit
34194A
Use with the 34194A 2U Dual Flange Kit to mount two Keysight System II (half-width, 2U height) instruments side by side.
The Keysight 34194A (5061-8769) dual lock link kit is recommended for side-by-side combinations and includes links for instruments of different depths. This kit can be used with the 34191A 2U Dual Flange Kit to mount two Keysight System II (half-width, 2U height - 88.1mm) instruments side-by-side.
The Keysight 34194A dual lock link kit is compatible with the Keysight 34460A, 34461A, 34465A, 34470A DMMs, the Keysight 34970A/34972A Data Acquisition/Switch Units, the Keysight 531xxA and 53200 Series frequency counters, the Keysight 33500 and 33600 series function generators, most E3600 power supplies and other 2-slot, half rack sized Keysight products.
Learn more about Data Acquisition Accessories and Options
IR Connectivity Bracket For U1240 Series Handheld Digital Multimeters
Use this bracket to attach your U1240 series handheld DMM to the U1173A IR USB cable.
Use this bracket to attach your U1240 series handheld DMM to the U1173A IR USB cable.
IR Connectivity Bracket For U1240 Series Handheld Digital Multimeters
U1179A
Use this bracket to attach your U1240 series handheld DMM to the U1173A IR USB cable.
The bracket can be plugged into Keysight U1240 Series handheld digital multimeters to connect with the U1173A IR-USB cable.
Precision Electronic Test Leads
Use these small, light weight, leads with small components and dense circuit boards.
Use these small, light weight, leads with small components and dense circuit boards.
Precision Electronic Test Leads
34133A
Use these small, light weight, leads with small components and dense circuit boards.
- Termination: right-angle shrouded banana plugs
- Maximum current: 3 A
- Rating: 1000 V CAT II
- Length: 1.2 meters (48 inches)
The Keysight 34133A precision electronic test leads are designed specifically for working with small components and dense circuit boards. Each kit includes two test leads (one red and one black).
For more information about Keysight test leads and probes for multimeters, please visit Multimeter Test Leads and Probes.
Upgrade - Accessory Kit for 34460A - Test Leads, USB Cable
3446ACCU provides the accessory kit for the 34460A, including the test leads and USB cable.
3446ACCU provides the accessory kit for the 34460A, including the test leads and USB cable.
Upgrade - Accessory Kit for 34460A - Test Leads, USB Cable
3446ACCU
3446ACCU provides the accessory kit for the 34460A, including the test leads and USB cable.
3446ACCU provides the full accessory kit for the 34460A Truevolt DMM.
Option available for the following models: 34460A
Order as: 3446ACCU
Upgrade contents:
- 34138A Test Lead Set with probes, fine tip probes, SMT grabbers, and mini grabber attachments
- USB cable
Adjustments required: No
Additional requirements: No
Installed by, estimated installation time: No installation required
Standard Test Lead Kit
Compatible with the U1230/40/50/70 handheld DMMs; includes test leads, test probes, alligator clips, and SMT and mini grabbers.
Compatible with the U1230/40/50/70 handheld DMMs; includes test leads, test probes, alligator clips, and SMT and mini grabbers.
Standard Test Lead Kit
U1168A
Compatible with the U1230/40/50/70 handheld DMMs; includes test leads, test probes, alligator clips, and SMT and mini grabbers.
The Keysight U1168A standard test lead kit is compatible with the U1230, U1240, U1250 and U1270 Series handheld digital multimeters. The set includes one pair of test leads, test probes (19 mm tips), test probes (4 mm tips), alligator clips, fine tip test probes, SMT grabbers and mini grabber (black only).
- Test leads: CAT III 1,000 V, CAT IV 600 V, 15 A rating
- Test probe (19 mm tips): CAT II 1,000 V, 15 A rating
- Test probe (4 mm tips): CAT III 1,000 V, CAT IV 600 V, 15 A rating (highly recommended for CAT IV environment)
- Alligator clips: CAT III 1,000 V, CAT IV 600 V, 15 A rating
- Fine-tipped test probes: CAT II 300 V, 3 A
- SMT grabber: CAT II 300 V, 3 A
- Mini grabber (black only): CAT II 300 V, 3 A
Low Thermal Input Cable
Use this 1.2-m shielded, 4-conductor connector only with the 34420A Micro Ohm Meter; terminated in copper spade lugs.
Use this 1.2-m shielded, 4-conductor connector only with the 34420A Micro Ohm Meter; terminated in copper spade lugs.
Low Thermal Input Cable
34102A
Use this 1.2-m shielded, 4-conductor connector only with the 34420A Micro Ohm Meter; terminated in copper spade lugs.
- Length: 1.2 meters (48 inches)
- Termination: copper spade lugs/34420A mating connector
The Keysight 34102A is a low-thermal input cable for the 34420A. It consists of a custom mating connector attached to a 1.2 m shielded 4-conductor cable terminated in copper spade lugs. It ships with the 34420A.
The Keysight 34102A is only compatible with the Keysight 34420A.
For more information about Keysight test leads and probes for multimeters, please visit Multimeter Test Leads and Probes.
Calibration Short for Digital Multimeters
Use this set of two connectors to apply a short to the input connectors of your digital multimeter
Use this set of two connectors to apply a short to the input connectors of your digital multimeter
Calibration Short for Digital Multimeters
34172B
Use this set of two connectors to apply a short to the input connectors of your digital multimeter
- Short: #24 AWG plated copper wire
- Terminals: low-thermal copper alloys
- Termination: five shrouded banana plugs
- Quantity: 2
The Keysight 34172B digital multimeter calibration short is a set of two shorts which provide a convenient and reliable method to apply a short to the input connectors of the multimeter. Terminals are made of low-thermal copper alloys to minimize thermally-induced voltages caused by dissimilar metals.
The Keysight 34172A is compatible with the Keysight 34460A, 34461A, 34401A, 34410A, 34411A, and L4411A digital multimeters.
Low Thermal Input Connector
Design custom input connections on your 34420A Micro Ohm Meter with this mating connector
Design custom input connections on your 34420A Micro Ohm Meter with this mating connector
Low Thermal Input Connector
34104A
Design custom input connections on your 34420A Micro Ohm Meter with this mating connector
- Wire: #22 to #28 AWG recommended
- Termination: 34420A mating connector
The Keysight 34104A is a low-thermal input connector that mates with the 34420A. It allows a user to design custom input connections.
The Keysight 34104A is only compatible with the 34420A.
