All Software Catalog

Quickly and easily identify waveform anomalies

• Application scans through over one thousand waveforms per second
• Isolate anomalous signal behavior
• Trigger on up to 8 Zones across multiple channels

Standard InfiniiScan Features

• Zone Quality Finder draws up to 8 "must pass" or "must not pass" zones on scope screen
• Measurement Finder sets boundary conditions to specified measurement and finds them
• Generic Serial Finder sets up an 80-bit serial pattern for trigger
• Non-monotonic Edge Finder easily identifies edges caused by reflections

Additional Standard InfiniiScan Features

• Runt Finder identifies under-sized signal pulses
• Measurement Limit Test counts violations against user-specified measurement values
• Set up to five different triggering conditions over all 4 analog channels

Compatibility

• This software is compatible with the V-Series, Z-Series, UXR-Series, and 90000 Series Infiniium oscilloscopes.

A 100-ps glitch, a non-monotonic edge and 80-bit serial patterns. No hardware solutions were capable of capturing any of these signals, but with InfiniiScan you can. Keysight Technologies' InfiniiScan event identification software allows you to quickly and easily identifies signal integrity issues in your electronic designs. This innovative software scans through thousands of acquired waveforms per second to help you isolate anomalous signal behaviors.

10/100GBASE-KR 64b/66b with Link Training Decode Software

• Set up your scope to show 64b/66b decode in less than 30 seconds
• Decode of 10G/100GBASE-KR links
• Link Training Decode of Differential Manchester Encoding (DME) to get detailed training frame information on control channels such as status update and coefficient update registers.
• Get access to a rich set of integrated protocol-level searches

100GBASE-KR/CR 64b/66b Solution with Link Training Decode Software

The software combines both a 64b/66b decoder and a link training decoder. This enables engineers to decode 64b/66b data and link training data in less than 30 seconds. It includes a suite of configurable protocol-level searches and software-based triggering specific to 64b/66b and link training of Ethernet technologies such as 100GBASE-KR/CR. The link training signaling, also known as Differential Manchester Encoding (DME), provides detailed information on control channels such as status update and coefficient registers. The multi-tab protocol viewer includes correlation between the waveforms and the selected packet, enabling users to quickly move between the physical and protocol layer information using the time correlated tracking marker. The 64b/66b and link training decoder is compatible with 100GBASE-KR/CR. It is compatible with Keysight 90000 Series, V-Series, Z-Series and UXR-Series oscilloscopes.

Interoperable and failure-free Automotive Ethernet multiGBASE-T1 devices are the goal — receiver testing can help.

Ensuring the receiver component of an Automotive Ethernet module or switch meets signal-quality requirements, is interoperable with others in the system, and complies with the IEEE 802.3ch Automotive Ethernet standard requires physical-layer electrical tests.

• Intuitive setup wizard for quick test setup, configuration, and test.
• Powerful characterization through multiple trials that show a full array of statistics for each measurement and returns the worst measurement value.
• Comprehensive test coverage of the GDDR7 electrical, timing, eye diagram and jitter tests.
• Offline testing capability with waveform files for completeness of simulation to validation workflow.
• De-embed interposer, cable and even package models to verify the true device performance.
• Cutting-edge equalization emulation using Keysight's built-in equalization analysis, including auto tap setup with multiple optimization algorithms, to accurately determine and simulate ideal DFE settings for a trained GDDR7 memory system.
• Signal-to-Noise and Distortion Ratio (SNDR) measurements to evaluate PAM signaling performance in the presence of crosstalk and other system impairment sources

The KS2201A PathWave Test Sync Executive is a programming environment based on Keysight's Hard Virtual Instrument (HVI) technology, that enables the development and execution of synchronous, real-time operations across multiple instruments. The real-time sequencing and synchronization capabilities make it a breakthrough tool for developing measurement applications that require tight synchronization, phase coherence, and real-time control and feedback. Achieve rapid development of high performance, synchronous real-time solutions with transparent multi-instrument synchronization.

Typical Testing Applications

• Quantum research: Instrumented Qubit control systems
• Multi-channel comms: MIMO, beamforming, multi-emitter test
• Wireless Power Amplifier (PA) test: alignment of envelope tracking (ET) and digital pre-distortion (DPD)
• Electronic Warfare (EW): Precisely timed multi-emitter and beamformed A/D systems
• Other validation applications that require precise timing across multiple chasses and families of equipment. (note: equipment support is also required)

Automotive Ethernet Conformance Test Software for a High Performance Oscilloscope

Next-generation ADAS systems require camera and radar systems with increasingly high resolution. That means new requirements for speed and bandwidth. The Automotive Ethernet standard enables faster data communication to meet the demands of today’s vehicles and the connected vehicles of the future.

Unlike CAN, LIN, Automotive Ethernet demands rigorous compliance verification using test cases that cover transmitters (Tx), receivers (Rx), and harness/connector assemblies. To help you save time and effort, Keysight offers solutions that automate the testing and validation across Transmitter (Tx), Receiver (Rx), and the connections between Automotive Ethernet devices. Our engineers have invested thousands of hours in learning the standards and creating automated, repeatable compliance tests. These proven applications help you ensure proper test configuration and valid measurement results. Ultimately, you’ll have greater confidence that your device is compliant. Now available for data rates up to 10Gbps. The AE6000T Automotive Ethernet Test Solution offers hardware and accessories to make sure you have all of the components you need to get up and running quickly.

The AE6920T Automotive Ethernet Tx Compliance Software covers 2 standards and 6 data rates in one solution:

• IEEE 10BASE-T1S, 100BASE-T1,1000BASE-T1, 2.5GBASE-T1, 5GBASE-T1 and 10GBASE-T1
• OPEN Alliance TC14, TC1, TC8, TC12, TC15

Key Capabilities

• Automated set up ensures result repeatability
• Test setup wizard guides you through test selection, configuration, connection, execution, and results reporting
• Comprehensive reports give you the test configuration, measurements made, pass / fail status, margin analysis, and waveforms
• Perform repeatable results with Keysight oscilloscopes

Ordering Information

• Software licenses are available either as node-locked, transportable, USB, or floating
• Licenses are available for purchase with 6-, 12-, 24- or 36-month support
• Software supports Infinium UXR-Series oscilloscopes

• OFDM, FBMC, F-OFDM with SCMA/NOMA multiple access
• FDD/TDD modes, up to 65,539 subcarriers
• Modulation formats from BPSK QPSK, 16 QAM to 1024QAM, 8PSK or uder-defined
• Support Massive MIMO & Beamforming up to 64 channel for 6G research
• EVM, constellation, burst summary, spectrum and more
• Multiple, simultaneous color-coded result views
• Provide the preset for wireless standards such as 6G Radio (FR1 and FR3 TDD), 5G NR (FR1 FDD/TDD), WLAN (802.11a/ah), ISDB-T, DAB, DVB-SH, and DVB-T/H, and more
• Improve EVM measurment with cross-correlated EVM (ccEVM) or IQ noise correction (IQ-NC) technoligies (requires 89601EVMC license)