- Enables high-accuracy noise figure and noise-power measurements
- Surpasses the accuracy of the Y-factor method and other cold-source implementations
- Optional scalar-calibrated method for faster measurements without an impedance tuner
This software application enables high-accuracy noise figure and noise-power measurements of amplifiers utilizing Keysight’s unique vector-source-correction technique that uses a source-impedance tuner to remove the effects of imperfect system-source match. This approach yields accuracy that surpasses that provided by the Y-factor method and other cold-source implementations, especially for in-fixture, on-wafer, and automated-test environments. A scalar-calibrated method is also available that offers less accuracy but is faster and does not require an impedance tuner.
The analyzer’s standard receivers are used for noise figure measurements. An external preamplifier and filter(s) are required for devices with < 30 dB of excess noise (gain plus noise figure in dB). S96029B controls Keysight N469x Series1 ECal modules configured as impedance tuners for use with the USB VNA.
For calibration, a standard mechanical cal kit or ECal module is required for the S-parameter portion of the cal (an ECal used as a tuner cannot be shared for calibration). To calibrate a standard receiver for noise figure measurements, a power meter is required. All calibration accessories must be ordered separately.
Learn more about Keysight Network Analyzer Software
Interested in a S96029B?
Featured Resources for S96029B Noise Figure Measurements with Vector Correction
Configuration Guides 2023.10.22
ENA-X and ENA Series Vector Network Analyzers
Data Sheets 2023.10.15
E5080B ENA Vector Network Analyzer
Installation Guides 2019.03.19
E5080B ENA Series Network Analyzer - Installation Guide
Technical Overviews 2023.07.11
Vector Network Analyzer
Reference Guides 2022.06.27
E5080B Security Features
Configuration Guides 2019.04.16
Keysight Technologies E5071C to E5080B Code Migration
모든 리소스 보기