Choose a country or area to see content specific to your location
사이트 기능 및 성능 향상을 위해 브라우저 쿠키를 활성화하십시오.
관련 가격, 특별 행사, 이벤트 및 연락처 정보를 보시려면 국가를 선택하여 주십시오.
- 개요 및 특징
- 구매 후 업그레이드
- Support DVB-T, DVB-H, and DVB-T2 (Version 1.1.1, 1.2.1, and 1.3.1) standards; DVB-T2 option supports Mode A (single PLP) and Mode B (multi-PLP), SISO and MISO, and DVB-T2-Lite measurements
- Support transmitter, modulator, gap-filler or SFN network RF measurements, analog baseband measurements with BBIQ input
- Provides one-button measurements with pass/fail per the standard, plus auto detection
- Spectrum and power measurement: channel power, shoulder attenuation, ACP, CCDF, spurious emission, SEM
- Modulation analysis measurement: constellation, TPS decoding (DVB-T), L1-signaling (DVB-T2), MER/EVM (MER RMS/peak, MER by subcarriers, MER by data, and pilot), BER, frequency error, amplitude error, phase error, phase jitter, quadrature error, amplitude imbalance, carrier suppression, MER monitoring
- Channel measurements: channel frequency response and channel impulse response (supports SFN test for pre-, post-, 0 dB, and out-of-GI range echo scenarios)
- Support auto-detection or manual settings of the DVB-T, DVB-H, DVB-T2, or DVB-T2-Lite signal; provides advanced settings such as equalization switch, payload type, demodulation symbols, out-of-band filtering, clock rate, and BER count
- Power accuracy: up to ±0.19 dB (95th percentile)
- Shoulder attenuation dynamic range: up to 97.8 dB (102.8 dB typical)
- MER floor: up to 50 dB (2K mode and 64QAM with EQ off for DVB-T); up to 51 dB (32K mode, 256 QAM, Constellation rotation Yes with EQ Off for DVB-T2)
- Support traditional user interface and SCPI remote interface programming
- KeysightCare software support subscription included
System Requirements and Compatibility
정렬 기준 :
이 제품에 대한 정보를 찾을 수 없습니다.