Toggle Menu
Confirm Your Country or Area
Please Confirm
Confirm your country to access relevant pricing, special offers, events, and contact information.
What are you looking for?
Suggested searches
No product matches found - System Exception
Matched content
N6705 Firmware
Which version of the firmware is right for my product?
- N6705C – use revision E.01.00.2699 and above
- N6705B – use last applicable firmware revision D.02.15
- N6705A – use last applicable firmware revision D.02.13 at Previous Version tab
NOTE: Please be aware that N6705C firmware is not compatible with N6705A/B
Keysight는 가능한 최신 버전을 사용하는 것을 권장하며, 최신 버전에는 현재 사용 가능한 가장 최신 버그 수정 및 보안 패치가 포함되어 있습니다.
| 릴리스 날짜 | 버젼 | 버전 설명 |
|---|---|---|
| 2022-10-06 | E.02.08.3238 | Support updated N6751A - N6756A modules with replacement 16 bit DAC due to chip shortage. |
| 릴리스 날짜 | 버젼 |
|---|---|
| 2022-10-06 | E.02.08.3238 |
| Version Description |
|---|
| Support updated N6751A - N6756A modules with replacement 16 bit DAC due to chip shortage. |
다운로드 방법
- Click Download, enter your information as required, and then click Download again.
설치 방법
- Download and install the Firmware Update Utility at the bottom of this page.
- Download the Keysight N6705 Firmware Update file at this page and save to a known location.
- Click Start > All Programs > Keysight Firmware Update Utility.
- Refer Firmware Update Utility Instructions at the bottom of this page to proceed
- The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
- Note: There is no need to re-calibrate when this new firmware is installed.
라이센스
- Does Not Require a License
지원 문서
부가 소프트웨어 / 유틸리티
Installs on: Instrument
운영 체제
- Windows 8
- Windows 7
- Windows XP
- Windows 10
선결 조건
Information Not Available
지원되는 계측기
- N6705C
다운로드 방법
- Click Download, enter your information as required, and then click Download again.
설치 방법
- Download and install the Firmware Update Utility at the bottom of this page.
- Download the Keysight N6705 Firmware Update file at this page and save to a known location.
- Click Start > All Programs > Keysight Firmware Update Utility.
- Refer Firmware Update Utility Instructions at the bottom of this page to proceed
- The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
- Note: There is no need to re-calibrate when this new firmware is installed.
라이센스
- Does Not Require a License
지원 문서
부가 소프트웨어 / 유틸리티
Installs on: Instrument
운영 체제
- Windows 8
- Windows 7
- Windows XP
- Windows 10
선결 조건
Information Not Available
지원되는 계측기
- N6705B
다운로드 방법
- Click Download, enter your information as required, and then click Download again.
설치 방법
- Download and install the Firmware Update Utility at the bottom of this page.
- Download the Keysight N6705 Firmware Update file at this page and save to a known location.
- Click Start > All Programs > Keysight Firmware Update Utility.
- Refer Firmware Update Utility Instructions at the bottom of this page to proceed
- The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
- Note: There is no need to re-calibrate when this new firmware is installed.
라이센스
- Does Not Require a License
지원 문서
부가 소프트웨어 / 유틸리티
Installs on: Instrument
운영 체제
- Windows 8
- Windows 7
- Windows XP
- Windows 10
선결 조건
Information Not Available
지원되는 계측기
- N6705C
다운로드 방법
- Click Download, enter your information as required, and then click Download again.
설치 방법
- Download and install the Firmware Update Utility at the bottom of this page.
- Download the Keysight N6705 Firmware Update file at this page and save to a known location.
- Click Start > All Programs > Keysight Firmware Update Utility.
- Refer Firmware Update Utility Instructions at the bottom of this page to proceed
- The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
- Note: There is no need to re-calibrate when this new firmware is installed.
라이센스
- Does Not Require a License
지원 문서
부가 소프트웨어 / 유틸리티
Installs on: Instrument
운영 체제
- Windows 8
- Windows 7
- Windows XP
- Windows 10
선결 조건
Information Not Available
지원되는 계측기
- N6705C
다운로드 방법
- Click Download, enter your information as required, and then click Download again.
설치 방법
- Download and install the Firmware Update Utility at the bottom of this page.
- Download the Keysight N6705 Firmware Update file at this page and save to a known location.
- Click Start > All Programs > Keysight Firmware Update Utility.
- Refer Firmware Update Utility Instructions at the bottom of this page to proceed
- The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
- Note: There is no need to re-calibrate when this new firmware is installed.
라이센스
- Does Not Require a License
지원 문서
부가 소프트웨어 / 유틸리티
Installs on: Instrument
운영 체제
- Windows 8
- Windows 7
- Windows XP
- Windows 10
선결 조건
Information Not Available
지원되는 계측기
- N6705C
다운로드 방법
- Click Download, enter your information as required, and then click Download again.
설치 방법
- Download and install the Firmware Update Utility at the bottom of this page.
- Download the Keysight N6705 Firmware Update file at this page and save to a known location.
- Click Start > All Programs > Keysight Firmware Update Utility.
- Refer Firmware Update Utility Instructions at the bottom of this page to proceed
- The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
- Note: There is no need to re-calibrate when this new firmware is installed.
라이센스
- Does Not Require a License
지원 문서
부가 소프트웨어 / 유틸리티
Installs on: Instrument
운영 체제
- Windows 8
- Windows 7
- Windows XP
- Windows 10
선결 조건
- Information Not Available
지원되는 계측기
- N6705C
다운로드 방법
- Click Download, enter your information as required, and then click Download again.
설치 방법
- Download and install the Firmware Update Utility at the bottom of this page.
- Download the Keysight N6705 Firmware Update file at this page and save to a known location.
- Click Start > All Programs > Keysight Firmware Update Utility.
- Refer Firmware Update Utility Instructions at the bottom of this page to proceed
- The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
- Note: There is no need to re-calibrate when this new firmware is installed.
라이센스
- Does Not Require a License
지원 문서
부가 소프트웨어 / 유틸리티
Installs on: Instrument
운영 체제
- Windows 8
- Windows 7
- Windows XP
- Windows 10
선결 조건
- Information Not Available
지원되는 계측기
- N6705C
다운로드 방법
- Click Download, enter your information as required, and then click Download again.
설치 방법
- Download and install the Firmware Update Utility at the bottom of this page.
- Download the Keysight N6705 Firmware Update file at this page and save to a known location.
- Click Start > All Programs > Keysight Firmware Update Utility.
- Refer Firmware Update Utility Instructions at the bottom of this page to proceed
- The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
- Note: There is no need to re-calibrate when this new firmware is installed.
라이센스
- Does Not Require a License
지원 문서
부가 소프트웨어 / 유틸리티
Installs on: Instrument
운영 체제
- Windows 8
- Windows 7
- Windows XP
- Windows 10
선결 조건
- Information Not Available
지원되는 계측기
- N6705C
다운로드 방법
- Click Download, enter your information as required, and then click Download again.
설치 방법
- Download and install the Firmware Update Utility at the bottom of this page.
- Download the Keysight N6705 Firmware Update file at this page and save to a known location.
- Click Start > All Programs > Keysight Firmware Update Utility.
- Refer Firmware Update Utility Instructions at the bottom of this page to proceed
- The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
- Note: There is no need to re-calibrate when this new firmware is installed.
라이센스
- Does Not Require a License
지원 문서
부가 소프트웨어 / 유틸리티
Installs on: Instrument
운영 체제
- Windows 8
- Windows 7
- Windows XP
- Windows 10
선결 조건
- Information Not Available
지원되는 계측기
- N6705C
다운로드 방법
- Click Download, enter your information as required, and then click Download again.
설치 방법
- Download and install the Firmware Update Utility at the bottom of this page.
- Download the Keysight N6705 Firmware Revision(.xs) at this page and save to a known location.
- Click Start > All Programs > Firmware Update Utility.
- Click Next.
- Click Browse and locate the firmware file. Select the file and open.
- Select the model number of the mainframe (N6705A or N6705B).
- Click Next.
- Select the I/O interface (GPIB, LAN or USB) that connects your N6705A/B mainframe to your PC.
- Choose the settings necessary for communication (GPIB address, IP address, USB ID).
- Click Update.
- The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
- Note: There is no need to re-calibrate when this new firmware is installed.
라이센스
- Does Not Require a License
지원 문서
부가 소프트웨어 / 유틸리티
Installs on: Instrument
운영 체제
- Windows 7
- Windows XP
선결 조건
- Information Not Available
지원되는 계측기
- N6705A, N6705B
다운로드 방법
- Click Download, enter your information as required, and then click Download again.
설치 방법
- Download and install the Firmware Update Utility at the bottom of this page.
- Download the Keysight N6705 Firmware Revision(.xs) at this page and save to a known location.
- Click Start > All Programs > Firmware Update Utility.
- Click Next.
- Click Browse and locate the firmware file. Select the file and open.
- Select the model number of the mainframe (N6705A or N6705B).
- Click Next.
- Select the I/O interface (GPIB, LAN or USB) that connects your N6705A/B mainframe to your PC.
- Choose the settings necessary for communication (GPIB address, IP address, USB ID).
- Click Update.
- The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
- Note: There is no need to re-calibrate when this new firmware is installed.
라이센스
- Does Not Require a License
지원 문서
부가 소프트웨어 / 유틸리티
Installs on: Instrument
운영 체제
- Windows 7
- Windows XP
선결 조건
- Information Not Available
지원되는 계측기
- N6705A, N6705B
What is N6705 Primary Firmware D.01.09?
Firmware revision D.01.09 is the latest revision of the primary firmware for the N6705 DC Power Analyzer mainframe. It is the main firmware that provides the features and functionality of the N6705. It can be installed in the following products:
N6705A, N6705B
Firmware revision D.01.09 supersedes all other earlier versions of firmware and is backwards compatible with all other earlier versions of firmware.
다운로드 방법
- Click Download, enter your information as required, and then click Download again.
설치 방법
- Download and install the Firmware Update Utility at the bottom of this page.
- Download the Keysight N6705 Firmware Revision(.xs) at this page and save to a known location.
- Click Start > All Programs > Firmware Update Utility.
- Click Next.
- Click Browse and locate the firmware file. Select the file and open.
- Select the model number of the mainframe (N6705A or N6705B).
- Click Next.
- Select the I/O interface (GPIB, LAN or USB) that connects your N6705A/B mainframe to your PC.
- Choose the settings necessary for communication (GPIB address, IP address, USB ID).
- Click Update.
- The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
- Note: There is no need to re-calibrate when this new firmware is installed.
라이센스
- Does Not Require a License
지원 문서
부가 소프트웨어 / 유틸리티
Installs on: Instrument
운영 체제
- Windows 7
- Windows XP
선결 조건
- Information Not Available
지원되는 계측기
- N6705A, N6705B
What is N6705 Backup Firmware Revision D.01.02?
Backup firmware revision D.01.02 is the latest revision of the backup firmware of the N6705A and N6705B. The backup firmware is installed to ensure that the instrument will function in the event of a firmware update failure. It is always a good idea to have the latest backup firmware installed on the N6705.
다운로드 방법
- Click Download, enter your information as required, and then click Download again.
설치 방법
- Download and install the Firmware Update Utility at the bottom of this page.
- Download the Keysight N6705 Firmware Revision(.xs) at this page and save to a known location.
- Click Start > All Programs > Firmware Update Utility.
- Click Next.
- Click Browse and locate the firmware file. Select the file and open.
- Select the model number of the mainframe (N6705A or N6705B).
- Click Next.
- Select the I/O interface (GPIB, LAN or USB) that connects your N6705A/B mainframe to your PC.
- Choose the settings necessary for communication (GPIB address, IP address, USB ID).
- Click Update.
- The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
- Note: There is no need to re-calibrate when this new firmware is installed.
라이센스
- Does Not Require a License
지원 문서
부가 소프트웨어 / 유틸리티
Installs on: Instrument
운영 체제
- Windows 7
- Windows XP
선결 조건
- Information Not Available
지원되는 계측기
- N6705A, N6705B
SHOW MORE
