Firmware Installation Procedure:

1. Click on the "4352B Signal Analyzer Firmware Revision X.XX" listed below the page. Copy the file(.src) to a floppy disk. For Firmware version 2.11, rename the file name from "4352update.src" to "Update.src".

2. While pressing [Preset] key of the instrument, turn the instrument power on.

3. Insert the floppy disk into the disk drive.

4. Press 'PREVIEW DISK' softkey. The update disk revision will be displayed.

5. Confirm the displayed "Update Disk Revision" and press Return.

6. Press 'SYSTEM UPDATE' softkey, then 'CONTINUE' to install the firmware from the floppy disk to the instrument. It will take about a few minutes.

7. After "Update Complete" is displayed, press 'REBOOT' softkey to reboot the instrument.

8. Press [System] key, then 'FIRMWARE REVISION' softkey to confirm the current firmware revision. If "POWER ON TEST FAILED" isn't displayed on the LCD and the new firmware revison is correctly displayed, the firmware installation is successfully completed.

Keysight는 가능한 최신 버전을 사용하는 것을 권장하며, 최신 버전에는 현재 사용 가능한 가장 최신 버그 수정 및 보안 패치가 포함되어 있습니다.
릴리스 날짜 버젼 버전 설명
2001-05-01 2.11 4352B Signal Analyzer Firmware Update Rev2.11
릴리스 날짜 버젼
2001-05-01 2.11
Version Description
4352B Signal Analyzer Firmware Update Rev2.11

다운로드 방법

  • Click the download button and save the file to a temporary directory on your PC (or instrument).

설치 방법

  • See Above

라이센스

  • Does Not Require a License
Download

Installs on: Instrument

선결 조건

  • No specific prerequisites

지원되는 계측기

  • 4352B

다운로드 방법

  • Click the download button and save the file to a temporary directory on your PC (or instrument).

설치 방법

  • See Above

라이센스

  • Does Not Require a License
Download

Installs on: Instrument

선결 조건

  • No specific prerequisites

지원되는 계측기

  • 4352B
SHOW MORE