Modular Systems

The Keysight DAQM901A module Data Acquisition System is the most versatile 20-channel multiplexer for general-purpose scanning. It combines dense, multi-function switching with 80 channel / second scan rates to address a broad spectrum of data acquisition applications.

Two- and four-wire channels can be mixed on the same module. Two additional fused inputs (22 channels total) route up to 1A of current to the internal digital multimeter, allowing ac and dc current measurements without the need for external shunt resistors.

• 20 Channel Multiplexer + 2 Channels for dedicated current measurement
• Two- and four-wire scanning
• 300 V switching
• 80 channels/s scanning
• Built-in thermocouple reference junction

Standard product includes:

• 1 DAQM901A, 20 Channel Multiplexer Module
• 1 Functional Test Certificate

• 20-channel actuator / general-purpose switch
• SPDT (Form C) latching relays
• 300 V, 1 A actuation and control

The Keysight DAQM903A is a general-purpose switch module data acquisition system with 20 independent single-pole, double-throw (SPDT) relays. Use it to cycle power to products under test, control indicator and status lights, and to actuate external power relays and solenoids. Combine it with matrix and multiplexer modules to build custom switch systems. The module's 300 V, 1 A contacts can handle up to 50 W, enough for many power-line switching applications.

Standard product includes:

• 1 DAQM903A, 20-channel actuator module
• 1 functional test certificate

• 4 Channel simultaneous sampling with differential inputs
• Sample rates of up to 100 kSa/s (in frequency domain) and up to 800 kSa/s (in time domain) with 24-bit resolution
• Differential input range selectable up to 36 Vpk
• IEPE current source (2mA - 4mA)
• Acquisition memory/channel, 16 MSa to 48 MSa

The Keysight DAQM909A module enables the DAQ970A and DAQ973A Data Acquisition System to perform dynamic data acquisition for applications such as harmonic and noise distortion, power analysis, and acoustic characterization of electromechanical devices.

Each channel can be independently programmed to one of four input modes, and current source settings. Three of these modules put together in a single mainframe can provide 12 channels of simultaneous digitization.

Standard Product Includes:

• 1 DAQM909A, 4 Channel Simultaneous Sampling Module
• 1 Functional Test Certificate

• 4 x 8 Matrix Switch
• 32 two-wire cross points
• 300 V, 1 A switching

The Keysight DAQM904A module Data Acquisition System gives you the most flexible connection path between your device under test and your test equipment, allowing different instruments to be connected to multiple points on your DUT at the same time. Rows or columns may be connected between multiple modules to build 8 x 8, 4 x 16 or larger matrices, with up to 96 cross points in a single frame.

Standard Product Includes:

• 1 DAQM904A, 4 x 8 Matrix Switch Module
• 1 Functional Test Certificate

• 20 Channel solid-state multiplexer
• Two- and four-wire scanning
• 120 V switching
• 450 channels/s scanning
• Built-in thermocouple reference junction

The Keysight DAQM900A module Data Acquisition System is the fastest switching and scanning multiplexer for general purpose use. It combines dense, multi-function switching with 450 channel/second scan rates to address high speed and high throughput data acquisition applications.

Two- and four-wire channels can be mixed on the same module. Capable of measuring voltage ac/dc, frequency/period, 2/4-wire resistance, and temperature with thermocouple sensors.

Standard Product Includes:

• 1 DAQM900A, 20 Channel Solid-state Multiplexer Module
• 1 Functional Test Certificate

• 16-channel multiplexer
• Two- and four-wire scanning
• 250 ch/s scanning
• Built-in thermocouple reference junction

The Keysight DAQM902A module data acquisition system employs reed relays to achieve scan rates up to 250 channels-per-second. Use this module for high-throughput automated test applications as well as high-speed data logging and monitoring tasks.

Sixteen two-wire inputs switch up to 300 V. You can also mix two- and four-wire channels on the same module. Current measurements require user-provided shunt resistors.

Standard product includes:

• 1 DAQM902A, 16-channel multiplexer module
• 1 functional test certificate

• 40 Channel Single-Ended Multiplexer
• Single-wire switching for common-low applications
• 100 channels/s scanning

Use the Keysight DAQM908A module Data Acquisition System for the greatest density in common-low applications, such as battery test, component characterization, and benchtop testing. Each module switches 40 one-wire inputs. All two-wire internal measurements except current are supported. Use only 2-wire RTD and Thermistor sensors for temperature measurements with this module. The module low connection is isolated from earth and can float up to 300 V.

Standard Product Includes:

• 1 DAQM908A, 40-Channel Single-Ended Multiplexer Module
• 1 Functional Test Certificate

• 16 bits of digital input and output
• 100 kHz totalizer input
• Two +/-12V analog outputs plus two voltage/current sensing channels
   

The Keysight DAQM907A module Data Acquisition System allows great flexibility for a variety of sense and control applications. It combines two 8-bit ports of digital input and output, a 100 kHz gated totalizer, and two ±12V analog outputs – all on a single earth-referenced module. The analog outputs have two additional voltage/current sensing channels. The digital inputs and totalizer input may be included in a scan. Alarm limits for the digital and event counter inputs are evaluated continuously, capturing and logging alarm conditions even between scans.

Digital Input/Output
Use the digital outputs with an external power supply to control microwave switches and attenuators, solenoids, power relays, indicators, and more. Use the digital inputs to sense limit switch and digital bus status. There are no complex handshake modes; reads and writes are initiated either from the front panel or the bus.

Totalize Input
Count events from devices like photo interrupters, limit switches, and Hall-effect sensors.
It keeps an updated total which can be read via the front panel or programmatically at any time. With 26 bits of resolution, it can count events at full speed for nearly 45 minutes without an overflow.

Analog Output
Use the two electronically calibrated analog outputs to source bias voltages to your device under test, to control your analog programmable power supplies, or use the outputs as setpoints for your control systems. The outputs are programmed directly in volts, either from the front panel or from the bus.

Standard Product Includes:

• 1 DAQM907A, Multifunction Module
• 1 Functional Test Certificate

• Dual 4 Channel RF Multiplexer
• 2 GHz bandwidth, 50 Ohm
• Cascade together for up to 16:1 multiplexer

The Keysight DAQM905A RF multiplexer module Data Acquisition System offers broadband switching capabilities for high-frequency and pulsed signals. Use it to route test signals between your device under test and your signal generator, oscilloscope, spectrum analyzer, or other instrumentation.

The RF multiplexers are arranged as two independent 1 x 4 multiplexers, each with a common shield and a switched center conductor. Connections can be made directly to SMB inputs with 2 GHz usable bandwidth, or to the BNC-to-SMB adapters provided with 1 GHz bandwidth. Multiple banks may be cascaded together for applications requiring even larger topologies-- create a stubless 16:1 multiplexer in a single frame.

Standard Product Includes:

• 1 DAQM905A, Dual 4-Channel 50 Ohm RF Multiplexer Module
• 1 Functional Test Certificate
• 10 Cables, 50 Ohm (SMB to BNC)

• 40 2-wire channels
• 300 V, 1 A switch; 2 A carry current
• 100 ch/s scanning
• Mix 2- or 4-wire configurations
• Built-in thermocouple reference junction
• 4 current channels
• Latching armature relays, with relay counter

The Keysight 34921A module for the 34980A Multifunction Switch/Measure Unit is the most versatile multiplexer for general purpose scanning. It has low thermal offset characteristics and a built-in thermocouple reference on the terminal block, making it ideal for temperature measurements directly to the internal DMM. The dense, multi-function switching with 100 channel/second scan rates addresses a broad spectrum of data acquisition applications.

Four additional fused inputs (44 channels total) route up to 1 A of current to the internal DMM, allowing AC and DC current measurements without the need for external shunt resistors. Standard 50-pin Dsub connectors allow for use with standard cables, terminal blocks, or mass interconnect solutions.

• 70 2-wire channels
• Mix 2- or 4-wire configurations
• 100 ch/s scanning
• 300 V, 1 A switch; 2 A carry current
• Latching armature relays, with relay counter

The Keysight 34922A module for the 34980A Multifunction Switch/Measure Unit offers high density multiplexer switching in a compact size. It combines dense, multi-function switching with 100 channel/second scan rates to address a broad spectrum of data acquisition applications.

Current measurements can be accomplished with user provided shunt resistors. Standard 78-pin Dsub connectors allow for use with standard cables, terminal blocks, or mass interconnect solutions.

• 40 2-wire channels or 80 1-wire channels
• Mixed 2- or 4-wire configurations
• High-speed reed relays, with relay counter
• 500 ch/s scanning
• +/-150 V peak, 0.5 A switch; 1.5 A carry current

The Keysight 34923A module for the 34980A Multifunction Switch/Measure Unit is a high speed-multiplexer for general purpose scanning. It uses reed relays to achieve scan rates up to 500 channels per second. Use this module for high-throughput automated test applications as well as high-speed data logging and monitoring tasks.

Current measurements can be accomplished with user supplied shunts. Standard 50-pin Dsub connectors allow for use with standard cables, terminal blocks, or mass interconnect solutions. 2- and 4-wire channels may be mixed on the same module, or configure as an 80 1-wire multiplexer.