Modular Systems

Channels

• 2 per module
• 16 per mainframe

Channel ratings

• 6 V, ±100 A, 437.5 W

Create unique sequences

• Combine charge, discharge, pre-charge, rest state, or a DC internal resistance (DCIR) measurement steps into a test sequence.

Monitor test conditions

• Monitor voltage, Current, Power, Amp*Hours, Watt*Hours, ΔV/Δt, ΔI/Δt, ΔV, ΔI during steps.

Safety and cell protection

• Probe-check assures good connections to your cells. Customize or use predefined limits to stop charge and discharging.

Ideal for testing higher power prismatic and pouch cells, the BT2205A charge-discharge module offers two physical channels capable of up to ± 100 A charge-discharge, and 6 V. Test higher current cells by paralleling channels. Control parallel channels as a single larger user channel. Parallel two, three, or up to 8 channels for a charge-discharge current of up to ± 800 A.

Channels

• 32 per module
• 256 per mainframe

Channel ratings

• 6 V, ±6.25 A, 27.34 W

Create unique sequences

• Combine charge, discharge, pre-charge, rest state, or a DC internal resistance (DCIR) measurement steps into a test sequence.

Monitor test conditions

• Monitor voltage, Current, Power, Amp*Hours, Watt*Hours, ΔV/Δt, ΔI/Δt, ΔV, ΔI during steps.

Safety and cell protection

• Probe-check assures good connections to your cells. Customize or use predefined limits to stop charge and discharging.

Ideal for testing higher power prismatic and pouch cells, the BT2204B charge-discharge module offers 32 physical channels capable of up to ± 6.25 A charge-discharge, and 6 V. Test higher current cells by paralleling channels. Control parallel channels as a single larger user channel. Parallel two, three, or all 32 channels for a charge-discharge current of up to ± 200 A.

Fast and Accurate Impedance

New digital designs make signal integrity more challenging. That's why the Keysight N1055A remote head module is designed to provide fast and accurate impedance and S-parameter measurements on high-speed designs with up to 16 ports. Configure your DCA-X oscilloscope mainframe with one to four N1055A time-domain reflectometry (TDR) / time-domain transmission (TDT) modules for an economical solution.  

• bandwidth options: 35 or 50 GHz (upgradeable)
• edge speed (10-90%, typical): 18 ps (35 GHz) or 7 ps (50 GHz)
• channel options: 2 or 4 per module (upgradeable) with independent skew control and up to 16 channels per N1000A DCA-X mainframe

• ultra-thin remote head: 1.27 m phase-stable cable, 2.92 mm (35 GHz), or 1.85 mm (50 GHz) connectors and integrated 67 GHz diode limiters for ESD/EOS protection
• TDR fixture de-embedding removes effects of fixtures, cables, or probes connected between remote heads and DUT

Modular Compatibility For Remote Sampling

The Keysight N1045B electrical port sampling head is a digital communications analyzer (DCA) module that is compatible with the N1000A DCA-X mainframe. Keysight's DCA modules provide a wide range of configurations and performance options to interchange the bandwidth, channel count, and features of your oscilloscope solution.

• 60 GHz bandwidth (65 GHz typical)
• 2 or 4 channels per module (user-selectable option)

• User-selectable bandwidth settings of 20 / 35 / 45 / 60 GHz
• Electrical inputs: 1.85 mm male or female (user-selectable option), sample rate 250 kSa/s

Output Ratings

• Voltage: 20 V
• Current: 50 A
• Power: 500 W

Programming Accuracy (at 23°C ±5°C)

• Voltage: 0.06% + 10 mV
• Current: 0.1% + 30 mA

Ripple & Noise (20 Hz to 20 MHz)

• Voltage peak-to-peak: 5 mV
• Voltage rms: 1 mV
• Current rms: 10 mA

The Keysight N6755A is a 500 W high-performance, autoranging DC power module that provides low noise, high accuracy and programming speeds that are up to 10 to 50 times faster than other programmable power supplies. Optional high-speed test extension offers an oscilloscope-like digitizer that increases measurement accuracy when viewing high-speed transient or pulse events within the device-under-test (DUT).

This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB and LXI compliance are standard. Select from more than 30 different DC power modules ranging in capability from basic to high precision, and in power from 20-500 Watts.

Download BenchVue Basic app for free to control your instruments.

Output Ratings

• Voltage: 60 V
• Current: 17 A
• Power: 500 W

Programming Accuracy (at 23°C ±5°C)

• Voltage high range: 0.03% + 12 mV
• Current high range: 0.075% + 4 mA

Ripple & Noise (20 Hz to 20 MHz)

• Voltage peak-to-peak: 6 mV
• Voltage rms: 1 mV
• Current rms: 4 mA

The Keysight N6766A is a 500 W precision DC power module that provides low noise, and precise control and measurements in the milliampere and microampere region with the ability to simultaneously digitize voltage and current, and capture those measurements in an oscilloscope-like data buffer.

This module is used in both the small, multiple output 1U high N6700 Low-Profile Modular Power System (for ATE systems) and the multiple output N6705 DC Power Analyzer (for bench testing). GPIB, LAN, USB and LXI compliance are standard. Select from more than 30 different DC power modules ranging in capability from basic to high precision, and in power from 20-500 Watts.

Download BenchVue Basic app for free to control your instruments.

The Keysight N6784A is a source/measure unit (SMU) designed for general-purpose precision sourcing and measurement. General-purpose applications can span many different industries and many different devices under test (DUTs). The N6784A SMU is a versatile tool designed to tackle many of these general-purpose applications. Its glitch-free operation ensures safe usage with the DUT during output and measurement range changes, even with capacitances of up to 150 µF. Its 4-quadrant operation enables it to act as a bipolar power supply or a bipolar electronic load, for added versatility. When using the N6784A SMU, engineers can be confident that they have an all-around general-purpose tool for their test systems or lab bench.

Other features and benefits of the N6784A:

• Glitch-free sourcing and measurement ― change output and measurement ranges without any glitches.
• 4-quadrant operation ― perform as a bipolar voltage or current source or as a bipolar CV or CC electronic load.
• Four current programming ranges - precisely source current down µA.
• Four current measurement ranges ― precisely capture the current levels of the DUT during different modes of operation.
• Excellent transient response ― keep voltage or current stable during high-speed load changes.
• Fast modulation of DC ― create waveforms up to 100 kHz to stimulate or load down the DUT.
• High-speed digitized measurements ― capture/view the power consumption of the DUT up to every 5 µs with built-in 200 kHz digitizer.

Output Ratings:

• Voltage: Up to ±20 V
• Current: Up to ±3 A
• Power: 20 W

Programming Accuracy (at 23°C ± 5°C after 30-minute warm-up. Applies from min. to max. program):

• Voltage, 20 V range: 0.025% + 1.8 mV
• Voltage, 6 V range: 0.025% + 600 µV
• Current, 3 A and 1 A ranges: 0.04% + 300 µA
• Current, 10 mA range: 0.25% + 5 µA

Output Programming Speed:

• The output voltage can change in 10 µs or at 100 kHz into a resistive load.

Measurement Accuracy (at 23°C ± 5°C):

• Voltage, 20 V range: 0.025% + 1.2 mV
• Current, 3 A range: 0.03% + 250 µA
• Current, 100 mA range: 0.025% + 10 µA
• Current 10 µA range: 0.025% + 8 nA

Download BenchVue Basic app for free to control your instruments.

Output Ratings (Simulator and Table Modes)

• maximum power: 510 W
• V_oc Max.: 65 V
• I_sc Max.: 8.5 A

Output Ratings (Fixed mode)

• maximum power: 510 W
• V rated: 0-60 V
• I rated: 0-8.5 A

Programming Accuracy at 22°C ±5°C

• voltage (Fixed Mode): 0.075% + 25 mV
• current (Fixed Mode): 0.2% + 20 mA

Ripple and Noise (20 Hz to 20 MHz)

• voltage rms, p-p (Simulator/Table Mode): 20 mV rms, 125 mV p-p
• voltage rms, p-p (Fixed Mode): 24 mV rms, 150 mV p-p
• current rms, p-p (Fixed Mode): 2.5 mA rms, 19 mA p-p

The Keysight E4361A is a 510 W solar array simulator DC power module that simulates the output characteristics of a solar array. The E4361A is primarily a current source with very low output capacitance. It offers fast I-V curve changes allowing you to accurately simulate the output of different solar arrays under various environmental conditions (e.g., temperature, age, eclipse, spin). The E4360 gives you the flexibility to operate it in two ways:

• input the four key operational parameters (V_oc, I_sc, V_mp, I_mp) needed for the SAS to internally create an I-V curve of a solar array
• download a user-defined table for the I-V curve of the solar array

This module works with the Keysight E4360A modular Solar Array Simulator (SAS) mainframe, which can hold up to two modules and saves rack space with its 2 U high size. LAN, USB, and GPIB interfaces are standard.

To simplify test system software development, the 14360A System Control Tool software package is shipped free with every E4360A SAS mainframe. This software simplifies the programming and control of multiple SASs. It allows a single function call to set up and control up to 100 E4360 outputs in a SAS system.

The E4360 SAS is available as a standalone off-the-shelf instrument and is also available from Keysight integrated into a full turnkey solar array simulator system configured to your exact specification with all the instruments and the software integrated and installed.

Modular Convenience for Waveform Analysis

The Keysight N1060A precision waveform analyzer is a digital communications analyzer (DCA) module that is compatible with the Keysight N1000A mainframe. Like all of Keysight's DCA modules, the N1060A provides a wide range of configurations and performance options to interchange the bandwidth and clock recovery data rate of your oscilloscope solution.

• Gain margin with high instrument performance: bandwidth to > 90 GHz, residual jitter as low as 45 fs, adjustable clock recovery peaking and loop bandwidth
  
• Reduce validation time with analysis tools like jitter spectrum analysis and software clock recovery emulation
  

• Reduce development time through instrument flexibility
• Enjoy simple, one connection “triggerless” operation with integrated clock recovery data rates to 64 GBd (112 Gb/s) (NRZ and PAM4) and integrated pickoffs

Characterize Your Highest-Performance Designs for 56 Gbaud and Beyond

The N1046A remote sampling heads are modules for your N1000A DCA-X mainframe. Like all of Keysight's DCA modules, the N1046A provides a wide range of configurations and performance options to interchange the bandwidth, channel count, and features of your oscilloscope solution.

• 75, 85, or >100 GHz maximum bandwidth available (upgradeable)
• 1, 2, or 4 channels per module (user-selectable option)
  

• High bandwidth and low-noise samplers, ideal for analyzing 224 Gb/s high-speed signals
• Electrical inputs: 1 mm female (1.0 female to 1.85 female adapters included), sample rate 250 kSa/s

The Keysight PZ2121A is a high-speed precision source / measure unit (SMU) featuring narrow-pulse width, fast Digitizer Mode, and seamless current measurement ranging. It enables narrow-pulsed measurements and fast dynamic measurements with a wide dynamic range for a wide range of emerging applications such as vertical-cavity surface-emitting laser (VCSEL) optical devices, integrated circuit (IC) testing. In addition, its low measurement noise performance enables measurements with shorter aperture times, and its seamless current measurement ranging function enables a wide dynamic range and eliminates range change time, which improves test throughput.

• Maximum output at 60 V / 3.5 A DC / 10.5 A pulse
• Minimum resolution at 6 μV/100 fA
• Low current measurement noise at 400 fArms with 1 power line cycle (PLC)
• Minimum pulse width at 10 μs
• Fast Digitizer Mode with maximum sampling rate at 15 MSa/s
• Wide dynamic range for dynamic measurement with seamless current measurement ranging
• Fast transient with 3.5 V/μs slew rate at max.

The Keysight PZ2110A is a precision source / measure unit (SMU) that expands precise measurements from conventional static measurements and pulsed measurements, to fast dynamic measurements. It is ideal for a wide variety of current versus voltage (IV) measurement tasks that require both high resolution and accuracy. The PZ2110A can accurately perform characterization, parametric tests, and reliability tests of semiconductors, active / passive components, and general electronic devices.

• Maximum output at 210 V, 315 mA DC / pulse
• Minimum resolution at 500 nV / 10 fA
• Low current measurement noise at 30 fArms with 1 power line cycle (PLC)
• Minimum pulse width at 20 μs
• Fast Digitizer Mode with maximum sampling rate at 1.25 MSa/s
• Fast transient with 1.5 V/μs maximum slew rate