Choose a country or area to see content specific to your location
What are you looking for?
-
-
3D Interconnect Designer
3D Interconnect Designer provides a flexible modeling and optimization environment for any advanced interconnect structure, including chiplets, stacked die, packages, and PCBs.
-
Save up to 50% on an XR8 Oscilloscope
Get faster digital validation for less with a trade-in.
-
Discover Keysight AI Data Center Builder
Emulate every part of your data center infrastructure. Emulate Anything. Optimize Everything.
-
Accelerate Signal Analysis with X-Series Measurement Applications
Use 25+ X-Series applications to analyze, demodulate, and troubleshoot signals across wireless, aerospace/defense, EMI, and phase noise.
-
Introducing AI-Enhanced Packet Brokers
With extra memory and storage, these enhanced NPBs run Keysight's AI security and performance monitoring software and AI stack.
-
Precision In-Circuit Testing for Production
Achieve fast, accurate board-level testing with robust inline and offline ICT designed for modern manufacturing.
-
Accelerate Your Innovation Engine
Explore curated support plans, prioritized to keep you innovating at speed.
-
448 Gb/s Waveform Generation
Achieve 200+ Gbaud multi-level modulated signals with high-speed AWGs for digital and optical standards.
-
Stream 120 MHz I/Q Data to Your Laptop in the FieldPinpoint interference with post-processing spectrum management software in the lab.
Find the Right ATE Power SolutionUse this selector tool to quickly identify the best power supply for your aerospace and defense ATE requirements.
-
- Solutions
-
Explore engineer-authored content and a vast knowledge base with thousands of learning opportunities.
FeaturedKeysight Learn offers immersive content on topics of interest, including solutions, blogs, events, and more.
- Buy
-
Quick access to support related self-help tasks.
Additional content to support your product needs.
Do more with Keysight ServicesExplore services to accelerate every step of your innovation journey.
Accessories
Explore the complete portfolio of Keysight accessories designed to complement and extend your instruments. Use the filters below to quickly find compatible accessories such as modules, cables, adapters, and other system components to configure, expand, and optimize your test system for your specific measurement needs.
Showing 12 of 157
-
18
-
138
No Filter available
InfiniiMax Ultra Probe Amplifier, 25 GHz
Best probes for measuring signals found in the latest DDR5 and MIPI standards.
Best probes for measuring signals found in the latest DDR5 and MIPI standards.
InfiniiMax Ultra Probe Amplifier, 25 GHz
MX0025A
Best probes for measuring signals found in the latest DDR5 and MIPI standards.
- Test and validate high-speed technologies such as DDR5 / MIPI with the 25 GHz probe amplifier (AP2).
- Experience the highest input impedance in midband frequencies for low-energy probing.
- Boost test margins with the lowest signal degradation.
- Probe small devices with the super-flexible micro probe head or choose from the widest variety of compatible probe heads for your unique application.
- Measure differential, single-ended, and common mode signals with a single probe tip.
- Use with Infiniium UXR-, 90000 X-, Q-, V-, and Z-Series oscilloscopes.
Keysight’s MX0025A InfiniiMax Ultra Series probe amplifier improves usability because you can measure differential, single-ended, and common mode signals with a single probe tip.
When you use a probe to connect your signal to your oscilloscope, it becomes part of the circuit affecting your test. Your probe may be hiding signal details, loading down your signal, or distorting it. InfiniiMax Ultra Series probes have the lowest loading for minimal impact to your circuit. Boost your test margins and gain measurement confidence with their unprecedented accuracy. Ensure your entire measurement system is helping you see the truest representation of your signal.
These probes have the lowest noise and capacitive loading and the lowest loading across more frequencies due to their RC high impedance profile. The InfiniiMax Ultra Series supports InfiniiMode and has a user-defined AC calibration mode, a wider input voltage range, more accuracy with unique S-parameter characterization, lower capacitive loading, a wider input voltage range, micro / socketed probe heads for smaller density probing, and more bandwidths. The InfiniiMax Ultra Series has an RC input impedance architecture with the lowest loading and least signal distortion across the widest frequency range.
InfiniiMax Ultra probes have three attenuation ranges — 1:1, 4:1, and 8:1 — giving you superior noise performance and large voltage ranges, all while maintaining maximum bandwidth. The input range automatically configures depending on the size of the input signal and vertical scale of your oscilloscope.
Choose from the three flexible input dynamic ranges from 600 mVpp at 1:1, 2.5 Vpp at 4:1, and 5 Vpp at 8:1. Clearly see and know when your design is satisfactory, keep up with standards, easily probe small devices, and reduce test complexity with the InfiniiMax Ultra Series probes.
Infiniium UXR Real-Time Oscilloscope Optimization Module, 1mm
Factory-quality vertical frame adjustment for 1 mm UXR, performed under site-specific environmental conditions
Factory-quality vertical frame adjustment for 1 mm UXR, performed under site-specific environmental conditions
Infiniium UXR Real-Time Oscilloscope Optimization Module, 1mm
N2125A
Factory-quality vertical frame adjustment for 1 mm UXR, performed under site-specific environmental conditions
- Adjust UXR-Series Oscilloscopes up to 110 GHz.
- Ruggedized 1.0 mm Female probe head.
- AutoProbe III interface.
- 3.5 mm Male RF Cable input.
- Probe Head Torque: 10 in-lb.
The Infiniium UXR-Series is the first real-time oscilloscope to offer an optional self-optimization module – capable of performing the frame adjustments to align internal correction constants under site environmental conditions. Optimization modules are available for all UXR-Series bulkhead connector types and supported bandwidths.
A full factory certified calibration consists of frame calibration adjustments, and subsequent testing and performance verification to ensure the oscilloscope is performing to its documented specifications. The optimization module performs only the factory-quality frame adjustment calibration steps. Additional instruments and components are necessary to perform the required horizontal adjustments and vertical performance verification procedures to achieve a full self-verified calibration. If an accredited certified calibration certificate is required, the UXR must be returned to a qualified Keysight service center.
Infiniium UXR Real-Time Oscilloscope Optimization Module, 1.85mm
Factory-quality vertical frame adjustment for 1.85 mm UXR, performed under site-specific environmental conditions
Factory-quality vertical frame adjustment for 1.85 mm UXR, performed under site-specific environmental conditions
Infiniium UXR Real-Time Oscilloscope Optimization Module, 1.85mm
N2126A
Factory-quality vertical frame adjustment for 1.85 mm UXR, performed under site-specific environmental conditions
- Adjusts UXR-Series Oscilloscopes with 40 to 70 GHz of bandwidth
- Ruggedized 1.85 mm Female probe head
- AutoProbe III interface
- 3.5 mm Male RF Cable input
- Probe Head Torque: 8 in-lb
The Infiniium UXR-Series is the first real-time oscilloscope to offer an optional self-optimization module – capable of performing the frame adjustments to align internal correction constants under site environmental conditions. Optimization modules are available for all UXR-Series bulkhead connector types and supported bandwidths.
A full factory certified calibration consists of frame calibration adjustments, and subsequent testing and performance verification to ensure the oscilloscope is performing to its documented specifications. The optimization module performs only the factory-quality frame adjustment calibration steps. Additional instruments and components are necessary to perform the required horizontal adjustments and vertical performance verification procedures to achieve a full self-verified calibration. If an accredited certified calibration certificate is required, the UXR must be returned to a qualified Keysight service center.
Infiniium UXR Real-Time Oscilloscope Optimization Module, 3.5mm
Factory-quality vertical frame adjustment for 3.5 mm UXR, performed under site-specific environmental conditions
Factory-quality vertical frame adjustment for 3.5 mm UXR, performed under site-specific environmental conditions
Infiniium UXR Real-Time Oscilloscope Optimization Module, 3.5mm
N2127A
Factory-quality vertical frame adjustment for 3.5 mm UXR, performed under site-specific environmental conditions
- Adjusts UXR-Series Oscilloscopes with 10 to 33 GHz of bandwidth
- Ruggedized 3.5 mm Female probe head
- AutoProbe II interface
- 3.5 mm Male RF Cable input
- Probe Head Torque: 8 in-lb
The Infiniium UXR-Series is the first real-time oscilloscope to offer an optional self-optimization module – capable of performing the frame adjustments to align internal correction constants under site environmental conditions. Optimization modules are available for all UXR-Series bulkhead connector types and supported bandwidths.
A full factory certified calibration consists of frame calibration adjustments, and subsequent testing and performance verification to ensure the oscilloscope is performing to its documented specifications. The optimization module performs only the factory-quality frame adjustment calibration steps. Additional instruments and components are necessary to perform the required horizontal adjustments and vertical performance verification procedures to achieve a full self-verified calibration. If an accredited certified calibration certificate is required, the UXR must be returned to a qualified Keysight service center.
Soft Carrying Case for 1000 X-Series Oscilloscope
Designed for the 1000 X-series oscilloscope; features padded sides and bottom, and a storage pouch for accessories
Designed for the 1000 X-series oscilloscope; features padded sides and bottom, and a storage pouch for accessories
Soft Carrying Case for 1000 X-Series Oscilloscope
N2738A
Designed for the 1000 X-series oscilloscope; features padded sides and bottom, and a storage pouch for accessories
- Nylon soft black carrying case with shoulder strap
- Also includes a storage pouch to keep your accessories secure
The N2738A Soft carrying case is the perfect way to travel with or store your 1000 X-Series oscilloscope. The case is designed for convenience with padded sides and bottom, as well as a storage pouch for your probes and additional accessories.
Soft Carrying Case
Transport your InfiniiVision series oscilloscope in this padded case with additional storage for probes and accessories.
Transport your InfiniiVision series oscilloscope in this padded case with additional storage for probes and accessories.
Soft Carrying Case
N2733B
Transport your InfiniiVision series oscilloscope in this padded case with additional storage for probes and accessories.
The N2733B Soft carrying case is the perfect way to travel with or store your InfiniiVision Series oscilloscope. The case is designed for convenience with padded sides and bottom, as well as a storage pouch for your probes and additional accessories.
Rack Mount Kit for 3000G X Series Oscilloscope
Rack mount kit for the 3000G X-Series oscilloscope.
Rack mount kit for the 3000G X-Series oscilloscope.
Rack Mount Kit for 3000G X Series Oscilloscope
N2169A
Rack mount kit for the 3000G X-Series oscilloscope.
Rackmount kit for the 3000G X-Series oscilloscope
- Width – 481.6 mm (18.961 inches)
- Height – 221.5 mm (8.72 inches)
- Depth – 156.00 mm (6.142 inches)
400 MHz High Voltage Differential Probe
DP0001A probe is a 400 MHz, 2kV (Mains Isolated) / 1 kV CAT III differential high voltage probe that you can use with a Keysight oscilloscope.
DP0001A probe is a 400 MHz, 2kV (Mains Isolated) / 1 kV CAT III differential high voltage probe that you can use with a Keysight oscilloscope.
400 MHz High Voltage Differential Probe
DP0001A
DP0001A probe is a 400 MHz, 2kV (Mains Isolated) / 1 kV CAT III differential high voltage probe that you can use with a Keysight oscilloscope.
- 400 MHz bandwidth
- 2,000 Vrms mains isolated, 6,000 V transient overvoltage
- Attenuation ratios: 50:1, 100:1, 250:1 or 500:1, auto-switchable on Infiniium scope
- Differential input impedance: 10 MΩ || 2pF
- High CMRR simplifies the measurement challenges found in noisy, high common-mode power electronics environments.
- UL safety certified
- Comes with a wide variety of high quality accessories
- AutoProbe interface, 50 Ω input
The DP0001A is a 400 MHz high voltage differential probe with 2 kV mains isolated or 1 kV CAT III rating designed for making accurate high-voltage power measurements required for testing today’s WBG power devices, power converters or motor drives. Thanks to high bandwidth and low loading characteristics, the probe can accurately measure 1kV transient pulse with as fast as 1.2 nsec of edge speed (10-90%) in modern switching power supplies. Also, high CMRR simplifies the measurement challenges found in noisy, high common-mode power electronics environments.
When used with an Infiniium oscilloscope, the probe supports an auto-switchable attenuation ratio that automatically sets the probe attenuation to the value necessary to make the dynamic range of the probe greater than or equal to the level required to measure the current input signal. A variety of accessories are shipped with this probe to suit various DUT connection scenarios and to make the connection to compact target devices possible.
The differential probes have a differential input resistance of 10 MΩ and low input capacitance of 2 pF to minimize circuit loading. The DP0001A is compatible with Keysight oscilloscopes with a 50-Ω AutoProbe interface, which configures the scope for the probe automatically.
When probing differential signals inside of environmental chambers at extreme temperatures, Keysight offers the N7013A extreme temperature extension kit. The N7013A is compatible with the DP0001A with a de-rated bandwidth of 70 MHz. The 70 cm long differential cable set and accessories can operate in temperatures ranging from -40 degC to +85 degC.
The probe is compatible with InfiniiVision 3000TX, 4000X, 6000X and Infiniium S, 9000A, 90000X, V, Z, UXR <=33GHz (with N5442A adapter).
LAN/VGA Module
Operate your oscilloscope remotely from your PC using a virtual web browser interface.
Operate your oscilloscope remotely from your PC using a virtual web browser interface.
LAN/VGA Module
DSOXLAN
Operate your oscilloscope remotely from your PC using a virtual web browser interface.
- Module plugs into rear-panel expansion slot.
- Combines 10/100Mbit LAN port with VGA out.
- LAN port is LXI compliant, enabling remote access, command, and printing.
- Compatible with VNC viewer for secure access.
- Web browser-based interface allows remote control -- ideal for accessing remote R&D and teaching labs.
LAN/VGA module gives you network connectivity and complete LXI compliant support as well as the ability to connect to an external monitor. Operate your scope remotely from your PC using the web browser interface with the virtual front panel interface that looks and acts as the real front panel on the scope with the same associated keys and knobs. Oscilloscope is required.
Front-Panel Cover for InfiniiVision HD3 Series Oscilloscopes
Upgrade your InfiniiVision HD3 Series oscilloscope with a front-panel cover.
Upgrade your InfiniiVision HD3 Series oscilloscope with a front-panel cover.
Front-Panel Cover for InfiniiVision HD3 Series Oscilloscopes
HD3COVER
Upgrade your InfiniiVision HD3 Series oscilloscope with a front-panel cover.
Front-panel cover for the Keysight InfiniiVision HD3 Series oscilloscope.
Rack-Mount Kit for InfiniiVision HD3 Series Oscilloscopes
Upgrade your InfiniiVision HD3 Series oscilloscope with a rack-mount kit.
Upgrade your InfiniiVision HD3 Series oscilloscope with a rack-mount kit.
Rack-Mount Kit for InfiniiVision HD3 Series Oscilloscopes
HD3RACK
Upgrade your InfiniiVision HD3 Series oscilloscope with a rack-mount kit.
Rack-mount kit for the Keysight InfiniiVision HD3 Series oscilloscope.
Soft Carrying Case for InfiniiVision HD3 Series Oscilloscopes
Upgrade your InfiniiVision HD3 Series oscilloscope with a soft carrying case.
Upgrade your InfiniiVision HD3 Series oscilloscope with a soft carrying case.
Soft Carrying Case for InfiniiVision HD3 Series Oscilloscopes
HD3CASE
Upgrade your InfiniiVision HD3 Series oscilloscope with a soft carrying case.
Soft carrying case for the Keysight InfiniiVision HD3 Series oscilloscope.
