Using Microwave Switches When Testing High Speed Serial Digital Interfaces

Many high speed digital interfaces use multiple lanes to achieve their system's throughput requirements. Most issues associated with this can be resolved with a switching network.

Reducing Downtime Remotely with Keysight On-Site Now!

With Keysight’s On-Site Now service, quicker expert consultants can respond and resolve your production issues faster and reduce downtime. Learn more.

Applications of Digital Noise Technology

Precision digital noise is deterministic and controllable in amplitude, frequency spectrum and even noise distribution. Learn Keysight’s approach to precision digital noise.

Testing New-Generation WLAN 802.11ac

This application note introduces the new WLAN new-generation testing technology of 802.11ac and the many different Keysight solutions for testing WLAN 802.11ac.

DVB-T and DVB-T2 Receiver Test Challenges

Learn how to simplify test setups and overcome the challenges of DVB-T and DVB-T2 receiver testing to minimize test costs for DVB-T2 and DVB-T systems.

Using SystemVue for Integrating Wireless PHY Design, Validation, and Test

Keysight SystemVue integrates system-level design tasks such as DSP modeling and Algorithm development with Verification and Test to create a unique new design flow for communications physical layer.

Perform Harmonic Analysis to Identify Signal Integrity Issues

Simplify performing harmonic analysis to identify signal integrity issues in electronic power systems. Learn how to the PA2200 Series helps make this possible!

What You Need to Successfully Debug Boundary Scan Test On i1000D In-Circuit Test System

Take 3 steps to reduce engineering effort in boundary scan implementation on the i1000 In-Circuit Test System from requirements and debugging tips to the set up.

Radar Testing with RF & Microwave Power Meters and Sensors

This paper explains some basic parameters of radar system and power measurement, and how to choose the best power meters and sensors for radar testing.

Microwave and Millimeter-wave Frequency Measurements

Accurate microwave and millimeter-wave frequency measurements are important in many applications. Learn the right steps to take to get accurate measurements.

Increase Test Throughput of Power Amplifier and Modules

Learn key issues for increasing speed of power amplifiers and front end modules and solutions for fast test throughput using modular Signal Generators.

Using Time Gated Fast Fourier Transforms for Mixed Domain Test

Learn to use our oscilloscope’s time gated fast fourier transforms to solve problems when debugging in the time and frequency domain or when making mixed domain tests.

Improving Test Efficiency of MEMS Electrostatic Actuators

This application brief describes how the Keysight E4980A LCR meter can greatly improve the test efficiency of MEMS electrostatic actuators. Learn more!

Battery Life Optimization for Wireless Medical Devices

Learn how to optimize battery life. Using a blip WiFi Blood Pressure Monitor as an actual use case, we explain how to measure battery life on a wireless medical device.

Materials Testing: Liquid Materials

Learn how Keysight’s liquid test fixture is designed and used with the E4990A impedance analyzer for permittivity measurements of liquid materials.

Boundary Scan Test Development on i1000D In-Circuit Test System

Reduce your boundary scan engineering efforts by using Keysight’s i1000D In-Circuit Test System. Follow this implementation guide to meet the requirements.

Overcoming Test Challenges of USB Type-C

An intro to the USB Type-C connector, the interface functions it provides, and test implications engineers face when integrating the connector into designs.

Automotive Electronic Control Unit (ECU) Transient Testing

Keysight’s N6705A helps improve your ECU test coverage by allowing easy capture and re-play of actual power system transients seen in your vehicle.

Sequential Shunt Regulation

This paper describes sequential shunt regulation and explains why Keysight E436xA modular solar array simulator (SAS) is ideal for sequential shunt configurations.

Monitoring and Controlling Particle Collisions at Nanometer Scale

The Large Hadron Collider (LHC) at CERN is a powerful particle accelerator. See how Keysight digitizers are used for control and diagnostics sections of the LHC.