Understanding LTE and 5G New Radio Coexistence Through Dynamic Spectrum Sharing with 89600 VSA Software

Learn about dynamic spectrum sharing (DSS), a technique that allows LTE and 5G New Radio (NR) to coexist on the same carrier. Discover the motivation behind DSS and techniques adapted by 5G NR for coexistence with LTE, and watch a demonstration covering how to verify DSS implementation without impacting LTE performance using Keysight Vector Signal Analysis (89600 VSA) software.

Demo: Using Conducted and Radiated EMI in ADS 2023

Complying with EMI standards is necessary step, yet performing EMI simulations are not simple. Many designers rely only on measurements, and then retro-fit the modifications, adding cost and delays to the project schedule. Watch this video to see how to easily perform Conducted and Radiated EMI analysis in ADS 2023.

EV & EVSE Charging Test for Interoperability & Conformance

In this video, Keysight shows the Scienlab Charging Discovery System (CDS) family of solutions, which consists of the Portable, EMC and High-Power Series. Users can test charging interfaces of EV and EVSE during high-power charging up to 900 kW as well as in EMC-sensitive environments. Our solutions allow to perform all necessary conformance and interoperability tests according to worldwide charging standards.

Software Experience Demo: Field-Test 5G Cell Sites

This 5G OTA scanning demonstration uses Keysight’s FieldFox solution to perform beam index and coverage testing, check dynamic spectrum sharing with LTE and non-standalone mode operation, and troubleshoot network interference.

EXCLUSIVE Look at Verizon's New 5G Network

Verizon Communications Inc. is testing a 5G network – and TheStreet got an exclusive look at all of it. We met with Nicki Palmer, Verizon Wireless' Chief Network Officer at their operations center in N.J., and she filled us in on their 5G testing and explained what it means for all of us.

Introducing Keysight's PathWave X-Series Measurement Applications

Demo Using RFPro in Layout vs Layout with Circuit Comparison

Learn how to use RFPro in a Layout vs. Layout with Circuit Comparison

Automate I²C Serial Protocol Triggering and Decoding

Use an oscilloscope, embedded analysis software, and BenchVue TestFlow software to create an automated I²C test that can be controlled remotely - any time and from anywhere.

EDA Chiplet PHY Designer

Showcasing the new Chiplet PHY (physical layer) Designer, which enables you to simulate, and analyze the high-speed channel between two D2D PHY interfaces used for interconnecting two chiplets.

Using DDS Enhancements in ADS 2023

Learn about the exciting data display enhancements in PathWave ADS 2023.

Using Electro-Thermal Simulation in ADS 2023

Electro-Thermal is a multi-physics simulator and is becoming more and more relevant to modern-day design applications where not only higher power circuits are being designed but also component density is increasing. Watch this video to understand how to simulate your design much easier for improved productivity.

RPA Walkthrough Video 01

This video guide walks through the basics of PathWave Instrument RPA for single Connection.

Software Experience Demo: 5G IoT Security Solutions

Learn how to assess the security of a device connected to a 5G cellular network using Keysight’s IoT Security Assessment Solution and the UXM 5G network emulator.

Testing 200 Gbps Lanes with Keysight Technologies at OFC 2021

Research is underway to develop the technology required for 200 Gbps lanes. At OFC 2021, Keysight demonstrates accurate waveform tests for next-generation transmitters using an N1000A DCA-X, N1030A optical reference receiver, and a UXR-Series oscilloscope with an N7005A external O/E converter. This test system will be used to characterize signals generated by a 212 Gbps E/O driven by a M8199A AWG.

RSE Use Case: Extended Object Demo

Video explaining how the current ways of testing automotive radar’s extended object tracking capability, are incomplete and therefore potentially risky, and a demonstration of how the RSE addresses that.

How to Make Channel Power Measurement

Demonstration of how X-Series Signal Analyzer can be used to measure RF Power

Introducing the VXG Microwave Signal Generators

VXG Microwave Signal Generator Introduction Video

6G R&D Testbed for 220-330 GHz with 30 GHz Bandwidth

6G R&D Testbed over-the-air (OTA) demo at 310 GHz with 30 GHz of bandwidth to achieve 100 Gbps data throughput.

Physical Layer Validation Challenges of Characterizing 100/200 Gbps/lane Designs

This session will be a practical discussion of IEEE 802.3ck (100Gbps/lane) physical layer conformal testing for both Tx and Rx. 100G silicon is emerging from the early specifications and a world of simulation. This track will help bridge the gap between simulation and physical layer evaluation of SERDES design and conformance testing.

Measure Phase and Amplitude Noise to mmWave Frequency

Demonstration of N5511A Phase Noise Test System