Keysight CyPerf Introduction

Cloud infrastructures are highly resilient and elastic, and much more dynamic than older on-premise infrastructures. To validate security effectiveness and performance bottlenecks in these environments, testing solutions must also address the characteristics of the cloud. Keysight's new CyPerf solves this challenge.

Introducing Keysight's N6700C Modular System Power Supply

Keysight Streamline Series USB Instruments Demo

Triple Output Bench Power Supply Teardown, Keysight E36300 Series

Learn how the E36300 Triple Output Bench Power Supply was designed for the highest reliability and quiet operation. The linear design and ample filtering create low noise on the output. Each output is completely independent and can be connected in parallel or serial to provide higher current or voltage. Internal relays simplify the setup of auto-parallel and auto-series modes. Relays are also used to switch between 2 and 4 wire measurements. The Bench Power supply is built around a single processor which provides fast response to the front panel and over the USB and LAN interface.

DAQ Applications for Automotive Electronics and Electric Vehicles

Data acquisition systems (DAQs) are versatile tools that can help automotive engineers characterize their products, monitor internal processes, or control test processes. DAQs are also useful for dynamic measurements of modern power electronics and battery systems in electric vehicles. Learn more about this cost-effective solution.

Overview of Keysight's Protocol R&D Software

5G NR Field Measurements – Beam Footprints Visualized in 3D

Keysight's 3D Visualizer is used to display 5G NR beams in a 3D environment to view which real-world elements are blocking the signal and degrading the network quality.

AE6910R Automotive Ethernet Compliance Software Demo

This video gives you an overview of how to perform automotive Ethernet receiver testing using Keysight AE6910R Automotive Ethernet 100 / 1000 Mb Rx Compliance Software.

Introducing Keysight's C8899A RCT Accessories

Real-Time Signal Analysis (RTSA) with the Widest Industry Bandwidth (2 GHz)

This video introduces the widest real-time signal analysis (RTSA) bandwidth in industry (2 GHz), supported by N9042B UXA X-Series signal analyzer.

System Designer for PCIe® Demo

Short demonstration of System Designer for PCIe® showing how to set up a PCIe simulation and review eye diagrams for forward, root complex, and backward channels.

Introducing Keysight's S8707A RF/RRM Carrier Acceptance Toolset

This video provides an overview of Keysight’s S8707A RF/RRM Carrier Acceptance Toolset.

Nemo 5G Measurement Solution

Keysight's Nemo 5G measurement solution provides a complete measurement system for sub 6GHz and millimeter wave (mm-wave) propagation.

N6705B DC Power Analyzer Scope and Power Supply Capabilities

This video highlights the N6705B's ability to supply up to four channels of voltage and current, with simultaneous or sequenced turn-on. The scope mode of the analyzer is then demonstrated, showing the dynamic current draw of a DC motor in real time.

Keysight DSRC Coc Certification Solution

Video demonstration of Keysight solution for dedicated short range communication testing.

Mid-range Server Testing

Get a quick walkthrough of Keysight Eggplant’s advanced automation capabilities for mid-range server testing.

DesignCon: Eight Demos in 30 Minutes

View each Keysight DesignCon demo station in just 30 minutes.

DC Electronic Load With Scope Mode for the Bench EL34243A (Part 4/4)

A DC electronic load with two channels and a built-in scope can capture and analyze cross-regulation. Power supplies with multiple voltage rails will have cross-regulation. It is important to characterize the cross-regulation to ensure that it does not affect the device. In the past, this measurement required multiple instruments. Today, a single instrument the EL34243A bench electronic load with a built-in scope mode can generate a unique dynamic load and capture the effects on adjacent voltage rails.

Life without Keysight

Learn what it takes to ensure long battery life for the most active IoT devices in your life.

Product demonstration of Keysight Automotive Ethernet Transmit test Solution

Video demo of Keysight Transmit test solution for 100BASE-T1 automotive Ethernet.