PD1500A Double Pulse Tester Basic Operation

This video shows some of the basic features of PD1500A Dynamic Power Device Analyzer/Double Pulse Tester.

Introducing Keysight's E7515B UXM

Flexible IoT Device Battery Life Analysis with the Keysight X8712A

Learn how to access FM radio with Keysight's N9917A FieldFox

Advanced Over-the-Air Analysis

Explore the WaveJudge over-the-air protocol analyzer, featuring the 5900 and 5000 hardware units. Learn how it captures RF signals, performs full-stack protocol analysis, and helps troubleshoot connectivity issues across LTE, 5G, NTN, and future 6G networks.

Threat Simulator: Validating Azure WAF Using Threat Simulation

Web Application Firewalls protect your web, mobile, and API applications from being exploited and are instrumental in preventing data breaches. This video demonstrates how you can use a Breach and Attack Simulation SaaS solution such as Keysight Threat Simulator to assess your Web Application Firewall configuration (or misconfigurations) in the Microsoft Azure cloud.

The reliable and rugged U1273AX Handheld Digital Multimeter

Discover how you can accelerate the completion of daily tasks with the reliable and ruggedness of the Keysight U1273AX OLED handheld Digital Multimeter. As the latest addition to the U1270 Series handheld digital multimeters, the U1273AX offers crystal clear readings with its OLED display.

G800 OFC Demo

Keysight - Lightwave magazine Webinar

The path to 200G serial interface - John Calvin & Richard Mellitz 1:00:00 Question and answers Explore the intricacies of emerging data center electrical interconnects associated with OIF-CEI and IEEE standards along with their deployment and validation challenges. To ensure specifications can be realized with practical test methods, this webinar addresses the progression from simulation to physical validation and discusses the boundary layer between the channel operating margin approach and physical layer validation efforts. Keysight Technologies and Samtec, leaders in the field of high-speed interconnect, cover the present-day challenges at 112 Gbps and the importance of ongoing developments for 224 Gbps and beyond. 224Gbps, OIFCEI, IEEE802.3, 800G, 800Gbps, designtest

CX3300 Series Device Current Waveform Analyzers

The mainframes of CX3300 series Device Current Waveform Analyzers capture measured current waveforms by current or differential sensors with up to 200 MHz bandwidth and at a sampling rate of up to 1 GSa/s. The measurement waveforms are captured with 14-bit or 16-bit resolution. To maintain the low noise sensing capabilities of the current and differential sensors, the mainframes are also designed to minimize the noise even under such wide measurement bandwidth.

Untitled Project

This videos discusses how to use ccEVM technique (using two signal analyzers) to achieve a low EVM measurement

U3810 Series Advanced IoT Teaching Solution Introduction - Solution Video

Keysight's ready-to-teach Advanced IoT courseware is designed to assist educators in quickly setting up new engineering courses on the Internet of Things, with the intention of producing students who will fully understand the challenges and requirements of the IoT system design cycle, from design and validation to deployment in the market.

ESP Controller_ON

Electronic Stability Program (ESP) enhances vehicle safety by monitoring driver intent and vehicle behavior in real time. When instability occurs, it automatically applies targeted braking and engine adjustments to maintain control, making stability an integral part of modern vehicle design from the earliest development stages.

EP-Scan for SI Applications

Explore how EP-Scan enables early signal integrity analysis within PCB layout workflows, allowing channel behavior to be evaluated and potential risks identified before final verification.

EP-Scan for Compliance Checks

Understand how EP-Scan enables compliance-driven validation of channel performance, delivering clear pass/fail outcomes for faster design decisions and reduced manual result review.

EP-Scan for Composite Designs

Enable end‑to‑end channel analysis by incorporating lumped RLC components directly into the signal path.

EP-Scan for Design Improvements

Accelerate design improvements by reusing existing analysis setup for faster re-validation on revised layouts.

EP-Scan for Fabrication-Aware Design Checks

Ensure design robustness by evaluating performance under fabrication variation, enabling validation against realistic manufacturing conditions.

EP-Scan for PI Applications

Ensure reliable power delivery network (PDN) design by analyzing DC IR-drop during the layout phase, improving power integrity visibility.

How To Optimize Hardware Utilization for 400G/800G/1.6T Optical Tx with FlexOTO Software?

Robert Sleigh, Business Development Manager at Keysight, demonstrates how to optimize test hardware utilization with FlexOTO software in different test configurations to achieve lowest cost-of-test.