EDU36311A Firmware

1. Click the Download button.
2. Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
3. Unzip the file to access the .dfu file.

From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.                                                    
It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.

• Does Not Require a License

• Windows 7
• Windows 8
• Windows 10

• Download and install Firmware Update Utility software

• EDU36311A

1. Click the Download button.
2. Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
3. Unzip the file to access the .dfu file.

From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.                                                    
It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.

• Does Not Require a License

• Windows 7
• Windows 8
• Windows 10

• Download and install Firmware Update Utility software

• EDU36311A

1. Click the Download button.
2. Save the file to your computer and note the directory where the file is saved.
3. Unzip the file to access the .dfu file.

1. Connect your EDU36311A to the PC.
2. Go to Start > Keysight Basic Firmware Update Utility tool.
3. Click Browse, then select the downloaded dfu file and click open.
4. Check if the version and instrument model is correct, then click Next.
5. Key in the VISA address for your LAN/USB connection.
6. Click on the Update button to perform firmware update.
   

• Does Not Require a License

• Windows 10

• Download and install Firmware Update Utility software

• EDU36311A

1. Click the Download button.
2. Save the file to your computer and note the directory where the file is saved.
3. Unzip the file to access the .dfu file.

1. Connect your EDU36311A to the PC.
2. Go to Start > Keysight Basic Firmware Update Utility tool.
3. Click Browse, then select the downloaded dfu file and click open.
4. Check if the version and instrument model is correct, then click Next.
5. Key in the VISA address for your LAN/USB connection.
6. Click on the Update button to perform firmware update.
   

• Does Not Require a License

• Windows 10

• Download and install Firmware Update Utility software

• EDU36311A

1. Click the Download button.
2. Save the file to your computer and note the directory where the file is saved. A firmware update installed over the USB interface is a file with a .dfu extension.
3. Unzip the file to access the .dfu file.

1. Refer to E36300 Series Firmware Update Instructions.
2. It is not necessary to recalibrate the instrument following a firmware update. 

• Does Not Require a License

• Windows XP
• Windows 7
• Windows 8
• Windows 10

• Download and install Firmware Update Utility software

• EDU36311A