All Software Catalog

Enable deeper insights in measurement and analysis by expanding the capabilities of your FieldFox handheld analyzer with software upgradeable capabilities. These capabilities are engineered to deliver precise measurements that agree with benchtop results into the field.

Features available for N9915B (Base model: cable and antenna analyzer):

• Full 2-port vector network analyzer
• VNA time domain
• Mixed-mode S-parameters
• QuickCal
• TDR cable measurements
• Vector voltmeter
• Spectrum analyzer
• Interference analyzer/Spectrogram
• Preamplifier
• Spectrum analyzer time gating
• USB power sensor support
• Pulse measurements with USB peak power sensor
• Built-in power meter
• Built-in variable DC voltage source
• Built-in GPS receiver
• Remote control capability

and more

• Measurement capabilities to handle routine maintenance and in-depth troubleshooting
• Maximize performance with VNA, spectrum analyzer, built-in power meter, vector voltmeter, and more
• Order with new instrument or upgrade an existing instrument

Enable deeper insights in measurement and analysis by expanding the capabilities of your FieldFox handheld analyzer with field-upgradeable software licenses. These capabilities are engineered to deliver benchtop results into the field.

• Handle routine maintenance and in-depth troubleshooting with one instrument
• Maximize performance with network analyzer, spectrum analyzer, built-in power meter, vector voltmeter, and more
• Order with a new instrument or upgrade an existing instrument

• Perform 5G NR (New Radio) transmitter one-button downlink and uplink measurements per 3GPP 5G NR standard Release 15, Release 16, Release 17, and Release 18
• Support large frequency error lock range defined in 3GPP Release 17 NTN and NR-TM2b & 3.1b (1024QAM) defined in 3GPP Release 17
  
• Support 3GPP Release 17 defined FR2-2 800/1600/2000 MHz channel bandwidth with new carrier spacing 480 kHz and 960 kHz
  
• Support 3GPP Release 17 defined reduced capabilities (RedCap) devices
  
• Support 5G Advanced defined in Release 18 with 3MHz channel bandwidth to operate in narrowband spectrum
• Support 3GPP Release 16 defined eDSS (Enhanced Dynamic Spectrum Sharing) and eMIMO (Enhanced MIMO)
• Support DL NR-TM presets and ACP/SEM/PvT measurement presets based on performance test specification
• Support downlink modulation analysis for SS Block (PSS+SSS+PBCH) PBCH-DMRS, PDSCH, PDSCH-DMRS, PDSCH-PTRS, PDCCH, PDCCH-DMRS, CSI-RS and decoding for PBCH, PDCCH, and PDSCH
  
• Support uplink modulation analysis for SRS, PUSCH, PUSCH-DMRS, PUSCH-PTRS, PUCCH, PUCCH-DMRS, and PRACH and decoding for PUCCH and PUSCH
  
• Spectrum and power measurements: channel power, SEM, ACP, OBW, spurious emissions, transmit On/Off power and CCDF
  
• Modulation analysis measurements: I/Q measured constellation, EVM (rms, peak), frequency error, symbol clock error, I/Q offset, Error vector time, Error vector spectrum, In-band emission, Power vs. slot/symbol, EVM vs. RB, TAE and frame summary etc
  
• Support both single-port measurement analysis and multiple component carrier (CC) sequential acquisition
  
• Support multi-touch user interface and SCPI remote interface programming
  
• Support IQ data recording and recalling as RAW Data txt, Signal Studio csv or 89601B sdf file formats
• Support the fast and easy configuration as saving or recalling component carrier setting *.scp, *.sgen, *.setx, *.nrcc., or *.pwsg to make the modulation analysis measurement
• Support cc-EVM (Cross-Correlated) and IQ-NC (Noise Correction) for EVM improvement
• KeysightCare software support subscription included
  
• Keysight supports tiered X-app models with N-models for UXA/PXA/PXE, E-models for MXA/EXA/MXE/VXT. The higher tiered X-app models can run at the lower platforms, which means N-models can run on all platforms, and E-models can only run on MXA/EXA/MXE/VXT

Enable deeper insights in measurement and analysis by expanding the capabilities of your FieldFox handheld analyzer with software upgradeable capabilities. These capabilities are engineered to deliver precise measurements that agree with benchtop results into the field.

Features available for N9936A (Base model: spectrum analyzer):

• Reflection measurements
• Full-band tracking generator
• Preamplifier
• Interference analyzer and spectrogram
• USB power sensor support
• Pulse measurements with USB peak power sensor
• Built-in power meter
• Built-in variable DC voltage source
• Built-in GPS receiver
• Remote control capability

and more

• Measurement capabilities to handle routine maintenance and in-depth troubleshooting
• Maximize performance with cable and antenna tester, built-in power meter, and more
• Order with new instrument or upgrade an existing instrument

Enable deeper insights in measurement and analysis by expanding the capabilities of your FieldFox handheld analyzer with software upgradeable capabilities. These capabilities are engineered to deliver precise measurements that agree with benchtop results into the field.

Features available for N9935B (Base model: spectrum analyzer):

• Reflection measurements
• Full-band tracking generator
• Preamplifier
• Interference analyzer and spectrogram
• USB power sensor support
• Pulse measurements with USB peak power sensor
• Built-in power meter
• Built-in variable DC voltage source
• Built-in GPS receiver
• Remote control capability

and more

Find out more about Keysight FieldFox Handheld Analyzer Software

• Measurement capabilities to handle routine maintenance and in-depth troubleshooting
• Maximize performance with VNA, spectrum analyzer, built-in power meter, vector voltmeter, and more
• Order with new instrument or upgrade an existing instrument

Enable deeper insights in measurement and analysis by expanding the capabilities of your FieldFox handheld analyzer with software upgradeable capabilities. These capabilities are engineered to deliver precise measurements that agree with benchtop results into the field.

Features available for N9917B (Base model: cable and antenna analyzer):

• Full 2-port vector network analyzer
• VNA time domain
• Mixed-mode S-parameters
• QuickCal
• TDR cable measurements
• Vector voltmeter
• Spectrum analyzer
• Interference analyzer/Spectrogram
• Preamplifier
• Spectrum analyzer time gating
• USB power sensor support
• Built-in power meter
• Built-in variable DC voltage source
• Frequency counter
• Built-in GPS receiver
• Pulse measurements
• Remote control capability

and more

• Measurement capabilities to handle routine maintenance and in-depth troubleshooting
• Maximize performance with VNA, spectrum analyzer, built-in power meter, vector voltmeter, and more
• Order with new instrument or upgrade an existing instrument

Enable deeper insights in measurement and analysis by expanding the capabilities of your FieldFox handheld analyzer with software upgradeable capabilities. These capabilities are engineered to deliver precise measurements that agree with benchtop results into the field.

Features available for N9960A (Base model: spectrum analyzer):

• Reflection measurements
• Full-band tracking generator
• Preamplifier
• Interference analyzer and spectrogram
• USB power sensor support
• Pulse measurements with USB peak power sensor
• Built-in power meter
• Built-in variable DC voltage source
• Built-in GPS receiver
• Remote control capability

and more

• Measurement capabilities to handle routine maintenance and in-depth troubleshooting
• Maximize performance with cable and antenna tester, built-in power meter, and more
• Order with new instrument or upgrade an existing instrument

Custom signal creation, measurement and data analysis with MATLAB

• Create arbitrary waveforms
• Customize your measurement and data analysis routines
• Create your own instruments applications and test systems
• Automates measurements, signal generation, and report generation

MATLAB configurations available

• MATLAB is available in three configurations directly from Keysight Technologies with the purchase of a new compatible instrument
• Install and execute MATLAB on a remote PC and communicate with instruments via GPIB or LAN
• Install and execute MATLAB directly on X-Series signal analyzers and select arbitrary waveform generators
• Includes 12 months of software updates from Mathworks

Automation and communication interface

• GPIB, LAN, USB, and VISA communications protocol support
• Communicate with the instruments using SCPI programming or instrument drivers (IVI, MATLAB)
• MATLAB instrument drivers created, tested and supported by Keysight for Keysight X-Series signal generators, X-Series signal analyzers and PSA spectrum analyzers
• Keysight Waveform Download Assistant for MATLAB with Keysight ESG, PSG and X-Series signal generators

Multiple MATLAB application examples and other features included with the N6171A purchase

• Additional technical capability - Users purchasing N6171A MATLAB software from Keysight receive multiple MATLAB application examples with source code as a key benefit or ordering MATLAB software together with your Keysight instrument. Details below
• Single purchase order - Order MATLAB together with your Keysight instrument so that it can be on a single purchase order to save you time, reduce ordering complexity, and typically add only a minimal cost to the purchase
• Guaranteed Access - By ordering MATLAB as the N6171A option with your instrument, you ensure that you always have your own MATLAB software license available when you need to use MATLAB with or without your Keysight instrument
• Dual technical support - MATLAB installation and technical support is available from either Keysight and or MathWorks when you purchase MATLAB software from Keysight

MATLAB overview

MATLAB is a well-respected software environment and programming language created by MathWorks and now available directly from Keysight as an option with most signal generators, signal analyzers, and spectrum analyzers. MATLAB extends the capabilities of Keysight signal analyzers and generators to make custom measurements, analyze and visualize data, create arbitrary waveforms, control instruments, and build test systems. It provides interactive tools and command-line functions for data analysis tasks such as signal processing, signal modulation, digital filtering, and curve fitting. MATLAB has over 1,000,000 users in diverse industries and disciplines, and it is a standard at more than 3,500 colleges and universities worldwide. Three MATLAB configurations are available and range from basic MATLAB capabilities that allow acquisition and analysis of data to full support for signal processing, communications, filter design, and automated testing.

MATLAB software is available for purchase directly from Keysight with the purchase of a new compatible instrument:

• Spectrum and Signal Analyzers: X-Series, PSA
• PXI Signal Analyzer: M9290A CXA-m
• Vector Transceiver: M9420A PXIe, M9421A PXIe
• Vector Signal Generators: X-Series, ESG, PSG
• Vector Signal Generators: M9381A PXIe, M9392A PXI
• PXI and AXIe Controllers: all models
• Arbitrary Waveform Generators: M8190A, M9330A, M9331A, 81180B
• Pulse Function Arbitrary Noise Generator: 81150A, 81160A

MATLAB capabilities

• Extend the functionality of Keysight signal and spectrum analyzers with MATLAB by analyzing and visualizing measurements, testing modulation schemes, and automating measurements 
• Excite electronic devices using Keysight signal generators with simple or complex waveforms created in MATLAB 
• Test the functionality of electronic devices by making measurements with Keysight instruments and comparing them against known baselines in MATLAB 
• Develop a GUI or application that enables users to perform data analysis or testing
• Characterize an electronic device to determine how closely it matches the design 
• Verify new algorithms or measurement routines using live data from Keysight instruments 
• Design custom digital filters in MATLAB and apply them to signals acquired from a Keysight instrument

Download MATLAB technical kit with application examples available with your N6171A MATLAB purchase

Download the technical kit containing an application note and multiple free MATLAB application examples to demonstrate the value of using MATLAB software together with Keysight signal generators, signal analyzers, PXI and AXIe modular hardware, and other instruments. Note: While these applications are provided at no charge and you are welcome to use them, they require a MATLAB license to operate, and many of these applications are not modifiable until your purchase the N6171A MATLAB option.

Order the N6171A MATLAB option together with your Keysight instrument purchase and receive access to the modifiable version of these example applications (in MATLAB file format). These modifiable examples will allow you to extend or customize the capabilities of these instruments for your specific setup. Applications examples and modifiable MATLAB source code included with your N6171A purchase include:

• Waveform sequencing, secure waveform upload, and long waveform generation application examples for your Keysight X-series signal generator.
• Fast (deep) data capture in IQ Mode and ACPR measurement automation application examples for with your Keysight X-series signal generator.
• IQTools application example for Keysight M8190A – Generate arbitrary waveforms and performing amplitude correction for Keysight M8190A, 81180A, M933xA, 81150A, 81160A, and other Keysight signal generators. IQ Tools can be downloaded from the Drivers, Firmware, and Software tab from the Technical Support link on the right-hand side of this page.
• Custom signal generation and playback – Create an arbitrary signal in MATLAB, modulate this signal using digital modulation techniques, upload the IQ data to a Keysight RF signal generator, transmit it, acquire the IQ measurement, and playback the recovered audio stream.
• IQ Data Capture – Acquire live IQ Data from Keysight signal analyzers for live or post processing.
• Digital pre-distortion (DPD) example – Use MATLAB software to use pre-distortion techniques to correct for the non-linearities caused by driving an amplifier near its power limitation.
• Advanced Data Visualization Application example for X-Series Analyzers – Analyze live X-Series signal analyzer data with 2-D and 3-D visualizations.
• Tune & Listen – This application example allows you to capture a signal with a spectrum analyzer, demodulate it, and play it out the PC speaker

Benefits

Adding MATLAB software to the purchase of your Keysight signal generators and analyzers provides five key benefits:

• Convenience: Acquire your software and instrument on a single purchase order
• Confidence: MATLAB software sold through Keysight has been tested and qualified by Keysight
• Support: Contact either Keysight or The MathWorks for help with installation and technical questions
• Quick start: Acquire numerous application examples directly from Keysight to get started
• Reliability: Ensure that your MATLAB software is always available to you when you need it

Getting started using MATLAB with your Keysight instrument

Request a Custom Quote to get started ordering and using MATLAB with your Keysight instrument. Mention in the instructions field if you are interested in receiving a free trial of MATLAB software or access to a list of MATLAB examples for use with your Keysight instruments.

For more information about PXI chassis and PXI controllers, please visit PXI Chassis page.

Enable deeper insights in measurement and analysis by expanding the capabilities of your FieldFox handheld analyzer with field-upgradeable software licenses. These capabilities are engineered to deliver benchtop results in the field.

• Maintenance and in-depth troubleshooting with one instrument with measurement capabilities
  
• Maximize performance with spectrum analyzer, built-in power meter, vector voltmeter, and more
• Order with a new instrument or upgrade an existing instrument

Enable deeper insights in measurement and analysis by expanding the capabilities of your FieldFox handheld analyzer with field-upgradeable software licenses. These capabilities are engineered to deliver benchtop results in the field.

• Maintenance and in-depth troubleshooting with one instrument with measurement capabilities
  
• Maximize performance with spectrum analyzer, built-in power meter, vector voltmeter, and more
• Order with a new instrument or upgrade an existing instrument

Enable deeper insights in measurement and analysis by expanding the capabilities of your FieldFox handheld analyzer with field-upgradeable software licenses. These capabilities are engineered to deliver benchtop results in the field.

• Maintenance and in-depth troubleshooting with one instrument with measurement capabilities
  
• Maximize performance with spectrum analyzer, built-in power meter, vector voltmeter, and more
• Order with a new instrument or upgrade an existing instrument

Enable deeper insights in measurement and analysis by expanding the capabilities of your FieldFox handheld analyzer with field-upgradeable software licenses. These capabilities are engineered to deliver benchtop results into the field.

• Handle routine maintenance and in-depth troubleshooting with one instrument
• Maximize performance with network analyzer, spectrum analyzer, built-in power meter, vector voltmeter, and more
• Order with a new instrument or upgrade an existing instrument