Accessories

• Withstands over 10,000 reconnection cycles, ensuring long-term reliability.
• Conforms with N-keying (also known as "wide key way") via a 2.20 mm (0.087 inches) key way.
• Facilitates fast and flexible adaptation of photonic test instruments to multiple connector types.

The bracket can be plugged into Keysight U1240 Series handheld digital multimeters to connect with the U1173A IR-USB cable.

Superior RF Performance

• Maximum SWR: 1.17

Features

• Waveguide Designator: EIA WR-22 MIL-W-85/3-013
• Flange Designator: UG-383/U MIL-F-3922/67B-013

The Keysight Q281A is a 2.4 mm female to WR-22 waveguide adapter that operates in the 33 to 50 GHz frequency range. These adapters transform waveguide transmission lines into 50 ohm coaxial lines. Power can transmitted in either direction, and each adapter covers the full frequency range of its waveguide band with SWR less than 1.3.

Learn more about latest information on Keysight waveguide adapters.

• Measurement accuracy and versatility for 1.0 millimeter test systems
• Ruggedized connector on one end
• Ease of use for on-wafer and coaxial measurements
• Insertion loss (typical) : 0.5 dB @110 GHz, 0.7 dB @120 GHz
• Return loss: 14 dB (75 to 120 GHz)
• Maximum CW power: 10 W
• Repeatability: -35 dB

The Keysight Y1900B precision 1.0 millimeter coax-to-ruggedized-coax adapter offers a simple way of measuring coaxial devices at higher frequencies. It is designed for the measurement of components with 50 ohms and frequency range from DC to 120 GHz.

Superior RF Performance

• Maximum SWR: 1.13

Features

• Waveguide Designator: EIA WR-28 MIL-W-85/3-009
• Flange Designator: UG-599/U MIL-F-3922

The Keysight R281B adapter transforms waveguide transmission line into 50-ohm coaxial line. Power can be transmitted in either direction, and each adapter covers the full frequency range of its waveguide band with SWR less than 1.3.

The Keysight 85130G test port adapter is designed to protect the test set port when it would be directly connected to the device under test. These adapters have a special rugged female connector designed for connecting to the network analyzer test port. This special connector will not mate with a standard male connector, but converts the rugged test set port to a connection that can be mated with the device under test. The set contains a NMD-2.4 mm (f) to NMD-2.4 mm (m) adapter and a NMD-2.4 mm (f) to PSC-2.4 mm (f) adapter. The frequency range for these adapters is dc to 50 GHz with a return loss of 23 dB or better.

The Keysight 85130F test port adapter is designed to protect the test set port when it would be directly connected to the device under test. These adapters have a special rugged female connector designed for connecting to the network analyzer test port. This special connector will not mate with a standard male connector, but converts the rugged test set port to a connection that can be mated with the device under test. The set contains a 2.4 mm to PSC-3.5 mm male adapter and a 2.4 mm to PSC-3.5 mm female adapter. The frequency range for these adapters is dc to 26.5 GHz with a return loss of 26 dB or better.

The Keysight 85130D test port adapter is designed to protect the test set port when it would be directly connected to the device under test. These adapters have a special rugged female connector designed for connecting to the network analyzer test port. This special connector will not mate with a standard male connector, but converts the rugged test set port to a connection that can be mated with the device under test. The set contains a 3.5 mm to PSC-3.5 mm male adapter and a 3.5 mm to PSC-3.5 mm female adapter. The frequency range for these adapters is dc to 26.5 GHz with a return loss of 28 dB or better.

For more information about 3.5 mm cables and adapters, please visit Cables for Network Analyzers with 3.5 mm Test Ports.

Used for 34921/23/25/31/32/33/37/38 –50-pin Dsub female – 125 V. Connector Kit is used to build custom cables.

For more information about, please visit Keysight Multifunction Switch / Measure Mainframe and Modules

For 16 measurement channels. One DB37(f) connector to connect to 16 channels of BT2152B. The DB37(f) connects on the board to two 16-pin screw terminal connectors (one for + terminal of all channels and one for – terminal of all channels). The screw terminal connectors support twisted-pair wiring (16-30 AWG) to the cells-under-test or to fixturing for the cells. Screw terminals are on 4 mm spacing. Boards have feet to use on a table and 4 mounting holes for standoffs and/or to attach the board inside test fixtures or cabinets. 

Learn more about Keysight Self-Discharge Measurement Solutions

Superior RF Performance

• Maximum SWR: 1.05

Features

• Waveguide Designator: EIA WR-90 MIL-W-85/1-077
• Flange Designator: UG-135/U MIL-F-3922/54C-008
• Optional Connector: Type-N female (see picture) or Type-N male

The Keysight X281C adapter transforms waveguide transmission line into 50-ohm coaxial line. Power can transmitted in either direction, and each adapter covers the full frequency range of its waveguide band with SWR less than 1.3.

Learn more about latest information on Keysight waveguide adapters.

 

Superior RF Performance

• Maximum SWR: 1.07

Features

• Waveguide designator: EIA WR-42 MIL-W-85 / 1-103
• Flange designator: UG-597 / U MIL-F-3922 / 54C-002

The Keysight K281C adapter transforms waveguide transmission line into 50 ohm coaxial line. Power can be transmitted in either direction, and each adapter covers the full frequency range of its waveguide band with SWR less than 1.07.