Accessories

The N1297A banana-triax adapter for 2-wire (non-Kelvin) connection supports low current measurement for less than 1 nA by enabling the use of high-performance triaxial cables. This solution makes it easy to connect to both triaxial-based test fixtures and wafer probers.

The N1297B is the banana-triax adapter for 4-wire (Kelvin) connection supports low current measurement for less than 1 nA by enabling the use of high-performance triaxial cables. This solution makes it easy to connect to both triaxial-based test fixtures and wafer probers.

The Keysight PX0101A converts ferrule terminals to BNC terminal for trigger or interlock connection. It supports the Keysight M9601/02/03/14/15A.

Cable length (options)

• PX0101A-001: 1.5 meter
• PX0101A-002: 3.0 meter

N1254A Options: 

• N1254A-103: Adapter - Triax (m) Guard connected to BNC (f) Common, VOLT:DC 210V 
  
• N1254A-105: Adapter - Triax (f) Common connected to BNC (m) Common, VOLT:DC 210V
• N1254A-500: HV Jack Connector Panel Mount – Solder Type

You can buy several optional accessories and adapters online. For more information about N1254A accessories and adapters.

The Y1217A is a rail kit designed for the M9010A, M9018B, and M9019A when used in a Keysight rack. It can be used with both the rack mount kit and the cable tray kit. The kit includes support rails and attachment hardware. An M9018B or M9019A that is racked using this rail kit and the cable tray uses 5U of rack space. This kit is not compatible with the Y1270A Front Panel Interfacing Kit.

The Keysight PX0110A converts MicroD25 GPIB to standard GPIB. It supports the Keysight PZ2100A.

• Standard GPIB to MicroD25
• Cable length: 0.25 meter
• Compatible with the PZ2100A

The Keysight PZ0114A converts MicroD25 GPIB to standard GPIB. It supports the Keysight PZ2100A.

• Standard GPIB to MicroD25
• Cable length: 1 meter
• Compatible with the PZ2100A

The Keysight PX0113A is a rack mount kit that provides all the necessary hardware to rack mount one Keysight PZ2100A in 1 U rack space. This rack mount kit includes front rack ears and rear supports that take the place of standard rack rails or slides.

The Keysight PX0112A provides four, single-slot filler panels for the Keysight PZ2100A with EMC gaskets.

The Keysight PX0111A is a kit of two plastic slot-blockers to be used for the Keysight PZ2100A. These can be placed in empty slots to help improve airflow through source / measure unit (SMU) modules in the PZ2100A. Require the use of a blank filler panels for the PZ2100A.

• Set of two, single-slot slot-blockers
• Made with static dissipative PC/ABS molding compound which prevents the slot blockers from holding a charge

The Keysight PX0104A is suitable for high current measurement up to 4 A DC. It supports the Keysight M9602/03A.

Cable length (options)

• PX0104A-001: 1.5 meter
• PX0104A-002: 3.0 meter

• Allows the system designer to decide how best to cool the M9018B and M9019A PXIe chassis
• Provides more design flexibility than any other PXI chassis
• The Y1214B Air Inlet Kit replaces the Y1214A Air Inlet Kit – the Y1214A Air Inlet Kit is only compatible with M9018A chassis with serial numbers TW54340000 and before.

The Y1214B Air Inlet Kit can be used to supply additional cooling air from the front of the chassis so that this air is directed to other slots. These air inlet modules utilize the unique cooling design of the M9018B and M9019A PXIe chassis The kit is not supported in any other PXI chassis and may actually decrease cooling capacity in other PXI chassis. Requires some assembly.