how-to-estimate-voltage-spikes-rev2

We showed you how to deal with layout parasitic inductance in our previous video entitled “How to design DC-to-DC power converters”, but a frequently asked question was “When should I start to worry about layout parasitics inductance? Is there a quick rule of thumb that says kind of ‘Caution: Further investigation's needed?'” The answer is yes and this follow up video is about how to make these estimates.

5G NR A-GNSS Conformance Testing per 3GPP 37.571-1

This video demonstrates the utilization of the S8705A for conducting A-GNSS test scenarios as outlined in the 3GPP test specification 37.571-1, featuring an actual test execution.

Turning SBOMs into Real Risk Reduction in Healthcare

Learn how medical device manufacturers and healthcare providers can transform Software Bills of Materials (SBOMs) into actionable cybersecurity risk reduction. Explore global regulatory requirements, vulnerability management best practices, and a practical framework for improving compliance, patient safety, and software supply chain transparency.

SBOM Readiness for the EU CRA

Learn how to meet EU Cyber Resilience Act (CRA) requirements with effective SBOM and vulnerability management. Discover best practices for generating machine-readable SBOMs, prioritizing remediation with VEX and reachability analysis, and preparing for upcoming CRA compliance deadlines with Keysight solutions.

The Digital Transformation of the Industry is Going Beyond Virtual Testing

Emmanuel Leroy presents Keysight’s vision at Big Compute 2022, highlighting how predictive, real‑time, and immersive technologies are advancing digital transformation beyond virtual testing to support cleaner, safer, and more productive industry outcomes.

EV Battery Safety & Performance

EVs must protect their batteries not only in normal driving but also during accidents, making safety a major design concern. These requirements apply at both the full‑vehicle level and the battery modules that make up the pack.

High Pressure Die Casting Process Validation

Automakers are increasingly turning to large aluminum mega‑castings to reduce CO₂ emissions, but these complex components demand costly tooling and precise quality control; Keysight Casting (ProCAST) helps ensure reliability by accurately predicting defects and risks throughout the die‑casting process.

Enhance Safety with Co-Simulation for Pre-Crash Scenarios

Discover how virtual homologation is advancing with combined system simulation and FEA to realistically model pre‑crash scenarios, including automated braking and steering with ABS during impact.

Sand Casting Process Validation

Sand casting often struggles with accuracy and defects, but Keysight Casting (ProCAST) improves quality by enabling quick castability checks, early solidification analysis, and full validation of filling, feeding, and microstructure during product design.

Improving comfort on bumpy tracks with Virtual Proving Ground

Virtual Proving Ground enhances heavy‑vehicle design by simulating rough terrain to optimize configurations, track vibration paths from ground to driver, and improve comfort and durability through system‑level simulation.

Virtually test construction machinery | Validating machine-environment-interactions in SimulationX

The Bauen 4.0 project developed a digital 5G construction test site where automated, connected machines interact intelligently with their environment, demonstrated through the coupling of SimulationX with Unity to simulate real‑time terrain, obstacles, and sensor‑driven machine responses.

Simplifying and Automating Compact Model Process with Machine Learning

This video demonstrates how the MBP Machine Learning Optimizer automates device modeling, cutting workflows from weeks to days and reducing hundreds of manual steps to just a few. It delivers stable, globally optimal results across many devices, enabling faster, more consistent, and more accurate modeling with minimal effort.

Eliminate physical prototypes for three common multi-material vehicle assemblies

Learn how auto OEMs can design safer, longer‑range electric vehicles by identifying the optimal mix of lightweight materials and manufacturing processes. Discover a single solution that helps reduce cost, save time, and eliminate late‑stage design changes.

Debug Designs with the InfiniiVision HD3 Series Oscilloscope

Keysight introduces the InfiniiVision HD3 Series, a portable oscilloscope with a custom ASIC, 14-bit ADC, and a low-noise front end that delivers four times the signal resolution and half the noise floor of other general-purpose oscilloscopes.

What Are the Goals of PCIe® 5.0?

Keysight's PCIe® technology expert, Rick Eads, describes the goals of the PCI-SIG® when developing the PCIe 5.0 standard, and explains what the differences are between PCIe 5.0 and PCIe 4.0 specifications.

Introducing the Vector Network Analyzer Portfolio

Accelerate innovation with Keysight vector network analyzers. Delivering high-performance speed, precision, and reliability. From R&D to production, our solutions ensure superior measurement integrity and repeatability, empowering you to validate designs, characterize components, and achieve exceptional quality with confidence.

G800GE for Data Center Network Testing

Michelle Havard demonstrates Keysight's G800GE for data center network testing, showing how to test interconnect link quality.

Keysight Expert Benchtop Oscilloscopes

Discover Keysight Expert Benchtop Oscilloscopes, designed for complex signal analysis with up to 6 GHz bandwidth, up to eight analog channels, deep memory, and advanced RF and high‑speed digital test capabilities. Ideal for demanding applications such as 5G MIMO, radar, satellite, and serial compliance validation.

C-V2X Congestion Testing

This video will explain how we create a congestion test with realistic scenario. We will show power profile for distance as well as periodicity for testing congestion control algorithms.

EVM Optimization with Keysight N9042B UXA X-Series Signal Analyzer

At mmWave frequencies, signal quality is more susceptible to impairments such as modulation errors, phase noise, and distortion. This video discusses how Keysight’s N9042B UXA new architecture provides low noise performance and high-dynamic range, and the best error vector magnitude (EVM) measurement in mmWave applications.