Here's the page we think you wanted. See search results instead:

Highlights

Bandwidth

  • 18 GHz (with MX0023A) and 12 GHz (with 1169B)

Input impedance and capacitance

  • Differential input R: 50 kΩ
  • Differential input C: 0.33 pF
  • Single-ended input R: 25 kΩ
  • Single-ended input C: 0.53 pF

For probing signals with a considerable amount of test points in tight space such as DDR memory system, the N5425B ZIF probe head with the ZIF tip may be the best solution for you.

ZIF (zero-insertion-force) probe heads and tips can reduce probe costs significantly when many measurement points are needed. The ZIF probe head requires ZIF tips that can be soldered down to various places on a circuit board. The ZIF probe head can then be shuttled between these tips to make measurements.

It has a flat frequency response all the way to 18 GHz when used in conjunction with the MX0023A InfiniiMax 25 GHz RC probe amp and is the most economical solder-in probe solution on the market today.

The probe head does not include any ZIF probe tips. Either the N5426A ZIF tips or N5451A long-wired ZIF tips should be ordered with these probe tips.
 

InfiniiMax Differential ZIF Probe Head

Interested in a N5425B?

Featured Resources for N5425B InfiniiMax Differential ZIF Probe Head, 18 GHz

Data Sheets 2023.03.15

Infiniium Oscilloscope Probes and Accessories

Infiniium Oscilloscope Probes and Accessories

To get the most out of your Keysight Infiniium oscilloscope, you need the right probes and accessories for your particular applications. Whether you need the high bandwidth and low loading of an active probe, an easy way to connect to surface mount ICs, or a passive probe to measure high voltages, there’s a wide selection of high-quality probes and accessories for your Infiniium oscilloscope. The Infiniium probes and accessories data sheet provides you the overview of all probes and accessories recommended for Infiniium oscilloscopes.

2023.03.15

Application Notes 2018.10.06

Probe Soldering Guidelines for Keysight InfiniiMax Probes

Probe Soldering Guidelines for Keysight InfiniiMax Probes

There are various ways to connect test instrumentation probes to devices under test (DUTs). One such method is soldering, which provides a reliable connection and minimizes parasitic probing effects by keeping wire lengths and connections as short as possible. Many of Keysight’s high performance oscilloscope probes utilize soldered connections. As probes and devices continue to shrink, using the correct tools and soldering skills becomes even more critical in order to avoid damage and connectivity issues. This guide provides helpful tips, recommended tools, and techniques specific to Keysight probes to help test engineers make the most out of their soldered-in probes and connections.

2018.10.06

User Manuals 2023.07.26

1168/9B-Series Differential and Single-Ended Probes User Guide

1168/9B-Series Differential and Single-Ended Probes User Guide

This guide describes how to set up and use the 1168/9B-series probes with their compatible probe heads.

2023.07.26

View All Resources

View All Resources

Want help or have questions?

Contact Us