What are you looking for?
Every new 5G device will contain a high-performance 5G chipset and will need to connect to a 5G service provider network. Subscriber quality of experience (QoE) will rely on getting the most out of a device’s features, including battery management, over-the-air radio and antenna performance, and the ability to seamlessly connect to peripheral devices. Shortcomings in any part will lead to poor usability ratings and low adoption by service providers and consumers.
5G New Radio Solutions
5G New Radio initial standards are approved and first chipsets are released, setting the stage for large-scale trials and commercial deployments. New millimeter operating bands, wider transmission bandwidths, and new technologies will challenge the way you design, test, and optimize 5G products.
Keysight partnered early with industry leaders to understand the complexities of 5G and to develop solutions that span the entire workflow, from simulation, development, and design verification, to conformance and acceptance test, and into manufacturing.
Better Battery Management
Mobile device power requirements range from tens of milliamps when transmitting to nanoamps in sleep mode. Optimizing your device’s power management requires accurate low-power measurement, a million-to-one dynamic range to capture high-power events, and fast power-draw transient analysis.
Our patented power measurement solutions give you the highest precision for optimizing power settings. We also emulate 4G and 5G radio access network (RAN) and channel, so you can simulate your power consumption in real-world conditions.
Precision High-Speed Digital Interfaces
Mobile device chipset and component integration relies on a collection of high-speed digital specifications. Antennas, chipsets, peripherals, and processors rely on different digital standards to ensure high-bandwidth data transmission without excess power consumption or electromagnetic interference (EMI).
Every generational change of the digital standards used in mobile devices is a potential risk to the performance of your device and your timeline for product introduction. Keysight sits on steering committees and boards of many standards bodies, and our experience testing interconnect standards reduces this risk and helps you accelerate your product introductions.
Make sure you are testing your design against the latest digital interconnect standards to minimize design risk and maximize chipset performance. See Keysight's solutions for the following standards:
RF and Radio Resource Management Testing
5G mobile devices will combine familiar sub-6GHz bands with new MIMO antenna systems, as well as high-frequency millimeter-wave (mmWave) bands with highly-focused beam-steering. With different global spectrum assignments and the need for devices to operate in both non-standalone and standalone use cases, the chipset test matrix is enormous. Device RF testing goes much faster if the device designer is using the same channel and traffic emulation as the carrier architect and chipset designers.
Performing device design-verification testing, radio resource management (RRM), and RF pre-conformance is faster when you use pre-built carrier-compliant test scenarios. Thoroughly test the parametric performance, physical layer, and protocol functionality of your device’s chipset using the same emulated network and channel used by the carriers.
Error Vector Magnitude (EVM) is a one of many key figures of merit measuring noise, interfering signals, and nonlinear distortion. For any key figure of merit of this type, your 5G R&D testbed needs to be significantly better than the device you are measuring. For any of your design's key figures of merit, make sure you are measuring using the same depth as your mobile operator's network equipment manufacturer.
Beamforming is a key technology in 5G mmWave communication systems. To ensure reliable and efficient communications, the performance of critical elements that form part of the beamformer IC needs to be rigorously tested under linear and nonlinear conditions across the entire workflow from design and validation to manufacturing.
5G Protocol Testing
Every new device carrying a new 5G chipset will have a list of testing to perform: feature bring-up, functional testing, negative testing, regression testing, KPI testing, data throughput test, and overall device performance test.
Make sure your protocol test solution has the most complete protocol stack available on a software platform with fully-developed, carrier-based test cases. You need a single system that handles RF, intermediate frequency (IF), and mmWave frequencies in the most realistic replication of a real-world environment.
Translating the 5G NR Specification into Commercial Products Produced in Volume
Operators and device vendors have started conducting field trials around the world, and the race is on to commercialize 5G. One of the first 5G products introduced was a customer premises equipment (CPE) unit for a fixed wireless access service, offering multi-gigabit data throughput in select US cities. Mobile hotspots and mobile smartphones in multiple worldwide locations will follow shortly after.
Mobile Device Manufacturer Streamlines 5G Development With Scalable Solutions
A leading manufacturer of mobile devices needed a technology partner who could provide millimeter-wave and over-the-air solutions with the capability and performance to bring 5G devices to market quickly. They were looking for network emulation solutions that would streamline device development workflows, from early prototyping to acceptance and manufacturing.
Emulating Real-world Radio Channel Conditions
Once you’ve demonstrated stability and high data rates in clean and ideal channel conditions, your next challenge includes validating the mobile device or base station performance under real-world conditions where the channel is non-ideal, complex, faded, and filled with interference.
Make sure you have access to the most reliable tools for characterizing end-to-end system performance of base stations and mobile devices across all 5G NR signal bandwidths and CA schemes by emulating real-world complex 3D fading and interference channel conditions in your lab.
"Keysight's end-to-end 5G test solutions have accelerated the development and validation of our new 5G designs across the workflow, from early prototyping to design validation and manufacturing,
"We are proud of our 5G R&D progress, as well as the recent 5G public demonstrations, and are delighted to be working with Keysight as the leading 5G test solutions to help fast-track the release our first commercial 5G phone. Keysight's close relationships with our 5G chipset and operator partners affords the company valuable 5G insights and expertise, which makes them the ideal partner for OPPO."
"Xiaomi is committed to delivering cutting-edge R&D innovation and technology. Leveraging Keysight's 5G network emulation solutions will enable us to greatly accelerate development of our 5G mobile devices and establish a leadership position in the industry."