검색 결과 페이지입니다. . 추천 검색 결과 보기:

주요 특징

대역폭

  • 13 GHz(-3 dB)
  • Tr = 33.4 psec(10-90%)

입력 범위

  • DC 감쇠비: 10:1 또는 5:1
  • 입력 전압 범위: 2.5 Vpp 또는 ± 1.25 V(5:1 감쇠 시), 5 Vpp 또는 ± 2.5 V(10:1 감쇠 시)
  • 입력 공통 모드 범위: ± 7 VDC ~ 100 Hz, ± 1.25 V >100 Hz(5:1 감쇠 시), ± 2.5 V > 100 Hz(10:1 감쇠 시)
  • 오프셋 범위: ± 16 V(싱글 엔드 신호 프로빙 시)

입력 임피던스

  • DC 입력 저항: R diff = 100 kΩ ± 2%, R se = 50 kΩ ± 2%
  • 입력 저항(> 10 kHz): R diff = 1 kΩ, R se = 500 Ω
  • 입력 커패시턴스: C diff = 32 fF, C se = 44 fF(ZIF 프로브 헤드 포함)

연결

  • N2848A InfiniiMax III QuickTip 프로브 헤드 및 N5445A InfiniiMax III 브라우저
  • N5439A InfiniiMax III ZIF 프로브 헤드
  • N5444A InfiniiMax III 2.92 mm/3.5 mm/SMA 프로브 헤드
  • N5441A InfiniiMax III 솔더인 프로브 헤드

N2832A 시리즈 InfiniiMax III+ 프로빙 시스템은 차세대 InfiniiMax 프로빙으로, 차동 신호의 모든 구성 요소를 측정할 수 있는 프로브의 측정 기능과 유용성을 대폭 개선합니다. 내장된 InfiniiMode 기술을 이용하면 프로브 팁 연결을 조정하지 않아도 차동, 싱글 엔드 및 공통 모드를 전환할 수 있습니다.

N2832A 시리즈 프로브의 InfiniiMode는 다음과 같은 작동 모드를 제공합니다.

  • A – B(차동)
  • A – 접지(신호 싱글 A)
  • B – 접지(신호 싱글 B)
  • (A + B)/2 – 접지(공통 모드)

InfiniiMax III+는 전체 InfiniiMax III 프로브 헤드 어레이와 작동하며 InfiniiMax III+의 전체 대역폭을 지원합니다.
 

역량 확대

액세서리
모든 액세서리 보기

특집 리소스: N2832A InfiniiMax III+ 시리즈 프로브 앰프, 13 GHz

Data Sheets 2024.02.07

InfiniiMax RCRC Probing System

InfiniiMax RCRC Probing System

The new InfiniiMax 4 series probing system is a groundbreaking solution designed to deliver unparalleled signal fidelity and accuracy with bandwidth capabilities reaching up to 52 GHz, all while maintaining exceptionally low loading. With the InfiniiMax III/III+ probe amplifiers, this advanced InfiniiMax RCRC probe system ensures swift and reliable measurements ranging from 8 GHz to 52 GHz, setting a new standard in probing technology.

2024.02.07

Application Notes 2023.03.12

Probe Soldering Guidelines for Keysight InfiniiMax Probes

Probe Soldering Guidelines for Keysight InfiniiMax Probes

There are various ways to connect test instrumentation probes to devices under test (DUTs). One such method is soldering, which provides a reliable connection and minimizes parasitic probing effects by keeping wire lengths and connections as short as possible. Many of Keysight’s high performance oscilloscope probes utilize soldered connections. As probes and devices continue to shrink, using the correct tools and soldering skills becomes even more critical in order to avoid damage and connectivity issues. This guide provides helpful tips, recommended tools, and techniques specific to Keysight probes to help test engineers make the most out of their soldered-in probes and connections.

2023.03.12

User Manuals 2023.02.09

N2830/1/2A and N7000/1/2/3A InfiniiMax III+ Series Probes User Guide

N2830/1/2A and N7000/1/2/3A InfiniiMax III+ Series Probes User Guide

This guide describes how to set up, configure, and use the InfiniiMax III+ series probes.

2023.02.09

Quick Start Guides 2014.03.31

N2830A Series InfiniiMax III+ Probes Configuration Card

N2830A Series InfiniiMax III+ Probes Configuration Card

This card shows the recommended probe head configurations for the InfiniiMax III+ probing system. It also includes additional information and tips.

2014.03.31

Data Sheets 2024.04.20

Infiniium Oscilloscope Probes and Accessories

Infiniium Oscilloscope Probes and Accessories

To get the most out of your Keysight Infiniium oscilloscope, you need the right probes and accessories for your particular applications. Whether you need the high bandwidth and low loading of an active probe, an easy way to connect to surface mount ICs, or a passive probe to measure high voltages, there’s a wide selection of high-quality probes and accessories for your Infiniium oscilloscope. The Infiniium probes and accessories data sheet provides you the overview of all probes and accessories recommended for Infiniium oscilloscopes.

2024.04.20

Application Notes 2018.06.20

Bandwidth Boosting Techniques for the Infiniimax Probe Amp and Probe Head

Bandwidth Boosting Techniques for the Infiniimax Probe Amp and Probe Head

Keysight InfiniiMax differential probes are DSP corrected to have a flat magnitude and phase response to provide the highest possible accuracy. The bandwidth chosen to correct to is typically around 3dB non-corrected bandwidth. Usually, extending the bandwidth much beyond that point will increase the noise floor, and if pushed even further, can cause unrealistic noise artifacts. This application note presents the techniques used to extend the bandwidth performance of the InfiniiMax 1169A/B and the N5381A/B solder-in head using the PrecisionProbe application on Infiniium realtime oscilloscope.

2018.06.20

User Manuals 2014.04.14

N2830A-Series Differential InfiniiMax III + Probes Handling Guide

N2830A-Series Differential InfiniiMax III + Probes Handling Guide

This guide describes proper handling techniques for the N2830A-Series probes.

2014.04.14

Oscilloscope Probes Selection Guide

Oscilloscope Probes Selection Guide

Keysight offers a broad range of voltage, current, and optical probing solutions for InfiniiVision and Infiniium Series oscilloscopes.
모든 리소스 보기

모든 리소스 보기

다른 도움이 필요하십니까?

키사이트에 문의하기