All Software Catalog

• Support with WLAN 802.11a/g, 802.11b/g DSSS/CCK/PBCC, 802.11g DSSS-OFDM, 802.11n 20 MHz & 40 MHz signals (HT-Mixed, HT-Greenfield, Non-HT), 802.11af, 802.11ah, 802.11p standards one-button standard-based measurements with pass/fail tests per the standard
• Spectrum and power measurements: channel power, SEM, OBW, CCDF, spurious emission, Power vs Time, spectral flatness 
• Modulation analysis measurements: constellation diagram, EVM, EVM vs. symbol, EVM vs. subcarrier, Burst & Signal Info, numeric results, and Demod bits etc.
• Performance: EVM floor: up to -53 dB (0.23%) (nominal); Absolute power: up to 0.19 dB (at 95th percentile)
• Support multi-touch user interface and SCPI remote interface programming
• KeysightCare software support subscription included
  
• Keysight supports tiered application models with N-models for UXA/PXA/PXE, E-models for MXA/EXA/MXE/VXT, and W-models for CXA. The higher tiered application models can run at the lower platforms, which means N-models can run on all platforms, E-models can run on MXA/EXA/MXE/VXT and CXA, and W-models can only run on CXA
  

• Support 802.11ac and 802.11ax 20/40/80/160 MHz and 80+80 MHz one-button standard-based measurements with pass/fail tests per the standard
• Modulation analysis: up to 8x8 MIMO EVM measurement (only available with PXIe VXT M9421A/M9410A/M9411A)
• Modulation format: QPSK, 16/32/64/128/256/1024 and 4096 QAM
• Spectrum and power measurements: channel power, SEM, OBW, CCDF, spurious emission, Power vs Time, spectral flatness 
• Modulation analysis measurements: constellation diagram, EVM, EVM vs. symbol, EVM vs. subcarrier, Burst & Signal Info, User Info (802.11ax), numeric results, and Demod bits etc. 
• Performance: EVM floor up to -52 dB (0.25%) (nominal); Absolute power: up to ▒ 0.19 dB (at 95th percentile)
• Support cc-EVM (Cross-Correlated) and IQ-NC (Noise Correction) for EVM improvement
• Support multi-touch user interface and SCPI remote interface programming
• KeysightCare software support subscription included
  
• Keysight supports tiered X-app models with N-models for UXA/PXA/PXE, E-models for MXA/EXA/MXE/VXT. The higher tiered X-app models can run at the lower platforms, which means N-models can run on all platforms, and E-models can only run on MXA/EXA/MXE/VXT.
  

Enable deeper insights in measurement and analysis by expanding the capabilities of your FieldFox handheld analyzer with field-upgradeable software licenses. These capabilities are engineered to deliver benchtop results into the field.

• Handle routine maintenance and in-depth troubleshooting with one instrument
• Maximize performance with network analyzer, spectrum analyzer, built-in power meter, vector voltmeter, and more
• Order with a new instrument or upgrade an existing instrument

Enable deeper insights in measurement and analysis by expanding the capabilities of your FieldFox handheld analyzer with field-upgradeable software licenses. These capabilities are engineered to deliver benchtop results into the field.

• Handle routine maintenance and in-depth troubleshooting with one instrument
• Maximize performance with network analyzer, spectrum analyzer, built-in power meter, vector voltmeter, and more
• Order with a new instrument or upgrade an existing instrument

• OFDM, FBMC, F-OFDM with SCMA/NOMA multiple access
• FDD/TDD modes, up to 65,539 subcarriers
• Modulation formats from BPSK QPSK, 16 QAM to 1024QAM, 8PSK or uder-defined
• Support Massive MIMO & Beamforming up to 64 channel for 6G research
• EVM, constellation, burst summary, spectrum and more
• Multiple, simultaneous color-coded result views
• Provide the preset for wireless standards such as 6G Radio (FR1 and FR3 TDD), 5G NR (FR1 FDD/TDD), WLAN (802.11a/ah), ISDB-T, DAB, DVB-SH, and DVB-T/H, and more
• Improve EVM measurment with cross-correlated EVM (ccEVM) or IQ noise correction (IQ-NC) technoligies (requires 89601EVMC license)

• Measure and analyze signals in the time, frequency, and modulation domains
• Support two different acquisition modes as synchronous (simultaneous) or sequenced for carrier aggregation or multiple measurements
• Analyze data from over 45 supported hardware instruments, or use in simulation tools to verify design
• Record the acquired signal waveforms to playback for troubleshooting
• Automate tests using .NET language or SCPI command
• Analog demodulation of AM, FM, PM signals
• Channel quality modulation analysis for group delay and channel response analysis
• Digital modulation analysis, custom IQ modulation analysis, and Flex Frame modulatio analysis
• TEDS modulation analysis
• Custom OFDM modulation analysis
• EVM improvement technologies with ccEVM and IQ-NC
• PowerSuite (ACP and SEM) measurements

• Verify all key pulse signal modulation performance indicators relating to power, droop, overshoot, ripple, time (rise/fall/width/PRI), frequency, phase, and FM modulation using the comprehensive pulse table result metrics
• Visualize pulse signal modulation characteristics and impairment errors in detail with multiple time-synchronized amplitude, phase, and frequency (FM) trace results, in addition to flexible trace overlay support
• Quickly view statistical variance performance data for each reported pulse metric, accumulated over single or multiple acquisitions, using the pulse cumulative statistics table, graphical histogram, and trend line trace plots
• Record and playback signals by utilizing the 4 GB deep capture memory without having to setup an external recording solution
• Optimize pulse capture with fixed and variable length gated acquisition to capture just the pulse time of interest and not dead time
• Add real-time spectrum analyzer (RTSA) capability to the UXA, PXA or MXA signal analyzers to pinpoint interference caused by other transmitters in the operating band or other events such as cross-modulation of component carriers in the transmitter.
• Scatter plot can show the detailed pulse parameters by changing units in X- and Y-scales from pulse number, peak level in dBm, droop in dB, major time parameters such as rise time, rise edge, fall time, pulse width, PRI, and frequency parameters such as mean frequency, peak-to-peak deviation, mean phase and best-fit FM slope.
• Populates a diverse set of pulse metrics in a flexible table format. All metrics, including pulse table results, result statistics, and cumulative statistics are easily saved into formats such as .csv for custom reports and post analysis
• Support multi-touch user interface and SCPI remote interface programming
  
• KeysightCare software support subscription included
  
• Keysight supports tiered application models with N-models for UXA/PXA/PXE, E-models for MXA/EXA/MXE/VXT, and W-models for CXA. The higher tiered application models can run at the lower platforms, which means N-models can run on all platforms, E-models can run on MXA/EXA/MXE/VXT and CXA, and W-models can only run on CXA
  

Enable deeper insights in measurement and analysis by expanding the capabilities of your FieldFox handheld analyzer with field-upgradeable software licenses. These capabilities are engineered to deliver benchtop results into the field.

• Handle routine maintenance and in-depth troubleshooting with one instrument
• Maximize performance with network analyzer, spectrum analyzer, built-in power meter, vector voltmeter, and more
• Order with a new instrument or upgrade an existing instrument

• Conduct time and frequency domain analysis with up to 409,601 points FFT (fast Fourier transform); provide flexible traces and displays with simultaneous and multi-measurements.
• Support analog demodulation of AM, FM, or PM signals.
• Support stimulus-response measurements like AM / AM, AM / PM, and gain compression for power amplifiers or mixers.
• Support advanced trigger with selectable level, slope, delay, and hold-off.
• Record the acquired signal waveforms for playback and troubleshooting.
• Make group delay measurements using a simple wideband multi-tone stimulus signal or import / export the multi-tone stimulus definition from / to Keysight N7621B Signal Studio software, calibrating the input stimulus model with measured signal data, and performing simple and repeatable phase and magnitude channel response analysis. 
• Support synchronous (simultaneous) or sequenced acquisition mode for multiple measurements.
• Support 89601203C essential tier upgrade to standard tier with 89601202U,  which extends the capabilities to the limits on center frequency up to 55 GHz, IF / BBIQ bandwidth up to 2.16 GHz, up to four measurement channels, and four parallel VSA instances. This upgrade works with VSA2025 U2 or later release.

• Conduct time and frequency domain analysis with up to 409,601 points FFT (fast Fourier transform); provide flexible traces and displays with simultaneous and multi-measurements.
• Support analog demodulation of AM, FM, or PM signals.
• Support stimulus-response measurements like AM/ AM, AM/ PM, and gain compression for power amplifiers or mixers.
• Support advanced trigger with selectable level, slope, delay, and hold-off.
• Record the acquired signal waveforms for playback and troubleshooting.
• Make group delay measurements using a simple wideband multi-tone stimulus signal or import / export the multi-tone stimulus definition from / to Keysight N7621B Signal Studio software, calibrating the input stimulus model with measured signal data, and performing simple and repeatable phase and magnitude channel response analysis. 
• Support synchronous (simultaneous) or sequenced acquisition mode for multiple measurements.
• Support RF system calibration up to 110 GHz using U9361x RCal Receiver Calibrator (Technical Overview).

• Cross-correlated EVM is a technique used to extend the dynamic range of a receiver for best EVM performance
  
• Two receivers like oscilloscopes, PXI VXT, wireless test set, and X-series signal analyzers are used to capture and demodulate the same signal independently and perform cross-correlation on the error vectors to cancel out uncorrelated noise added by the receivers, resulting in a much lower EVM
• This technique causes the ccEVM value to primarily contain just the noise coming from the device under test (DUT)
• 89601EVMC option with VSA 2022 Update 1.0 release or beyond can enable accurate and best EVM performance of WLAN signals (requires WLAN 89601B7RC and/or 89601BHXC licenses)
• 89601EVMC option with VSA 2023 release or beyond can enable accurate and best EVM performance of 5G NR signals (requires 89601BHNC 5G NR license)
• 89601EVMC option with VSA 2023 Update 2.0 release or beyond can enable accurate and best EVM performance of Custom OFDM (requires 89601BHFC license) and Flex Frame (requires 89601AYAC license)
• 89601EVMC option with VSA 2024 release or beyond can enable accurate and best EVM performance of Satellite Communication for DVB-S/S2 (requires 89601DVBC license)

• 89601EVMC supports MIMO 2x2 and 4x4 signals in the 802.11n/ac/ax/be, Custom OFDM, and 5G NR measurements with VSA2024 release