Accessories

• Type-N (m), 50 ohm, open, short, load, and through
• DC to 18 GHz
• Open phase error: 0 to 6 GHz ≤ 2.0°, 6 to 9 GHz ≤ 3.0°, 9 to 18 GHz ≤ 4.0°
• Short phase error: 0 to 6 GHz ≤ 1.5°, 6 to 9 GHz ≤ 2.5°,9 to 18 GHz ≤ 3.0°
• Load return loss: 0 to 6 GHz ≥ 42 dB, 6 to 9 GHz, ≥ 35 dB, 9 to 18 GHz, ≥ 32 dB
• Dimensions: H x W x D ~ 106 x 72 x 22 mm

The 85518A 4-in-1 mechanical calibration module combines an open, short, load, and through in a compact unit. The product is small, easy to handle, and light weight. The through allows users to easily calibrate non-insertable devices, such as a cable or filter with male-male connectors. During the "thru" part of the calibration, the 85518A through can be used.

For more information about calibration kits, please visit Mechanical and Electronic Calibration Kits.

• Type-N (f), 50 ohm, open, short, load, and through
• DC to 18 GHz
• Open phase error: 0 to 6 GHz ≤ 2.0°, 6 to 9 GHz ≤ 3.0°, 9 to 18 GHz ≤ 4.0°
• Short phase error: 0 to 6 GHz ≤ 1.5°, 6 to 9 GHz ≤ 2.5°,9 to 18 GHz ≤ 3.0°
• Load return loss: 0 to 6 GHz ≥ 42 dB, 6 to 9 GHz, ≥ 35 dB, 9 to 18 GHz, ≥ 32 dB
• Dimensions: H x W x D ~ 121 x 89 x 22 mm

The 85519A 4-in-1 mechanical calibration module combines an open, short, load, and through in a compact unit. The product is small, easy to handle, and light weight. The through allows users to easily calibrate non-insertable devices, such as a cable or filter with female-female connectors. During the "thru" part of the calibration, the 85519A through can be used.

For more information about calibration kits, please visit Mechanical and Electronic Calibration Kits.

Embedded smart features

• Automatic amplitude correction and transfer of conversion loss data through USB plug and play features
• Automatic LO amplitude adjustment to compensate for cable loss (up to 3 m or 10 dB loss)
• Automatic detect mixer model/serial number when used with N9030A PXA, N9020A MXA, and N9010A EXA signal analyzer
     o  Automatic setting of the default frequency range and LO harmonic numbers
     o  Automatic LO alignment at start up      
     o  Automatic run calibration when time and temperature changes

Improved DANL and TOI

• Excellent conversion loss of 27 dB maximum and excellent amplitude accuracy

The Keysight M1970E 60 to 90 GHz waveguide harmonic mixer is an un-preselected mixer that will extend the operating frequency range of the N9030A PXA, N9020A MXA, and N9010A EXA signal analyzers up to 90 GHz. Smart features are embedded to help you to greatly simplify your overall test setup and improve the DANL and TOI of your test system. Go smart with harmonic mixing for your millimeter-wave applications.

 Embedded smart features:

• Automatic amplitude correction and transfer of conversion loss data through USB plug and play features
• Automatic LO amplitude adjustment to compensate for cable loss (up to 3 m or 10 dB loss)
• Vector correction data include magnitude and phase improving EVM measurement
• Automatic detect mixer model/serial number when used with N9040B UXA, N9030A PXA, N9020A MXA, and N9010A EXA signal analyzer

               - Automatic setting of the default frequency range and LO harmonic numbers

               - Automatic LO alignment at start up

               - Automatic run calibration when time and temperature changes

Improved DANL and TOI:

• Excellent conversion loss of 27 dB maximum and excellent amplitude accuracy

Keysight M1971E 55/60 to 90 GHz waveguide harmonic mixers is an un-preselected mixer provides a complete solution for wideband millimeter-wave signal analysis of more than 2 GHz with X-Series signal analyzers. Smart features are embedded to help you to greatly simplify your overall test setup and improve the DANL and TOI of your test system. Go smart with harmonic mixing for your millimeter-wave applications.

M1971E

Option 001 60 to 90 GHz Waveguide harmonic mixer
Option 003 55 to 90 GHz Waveguide harmonic mixer

Embedded smart features

• Automatic amplitude correction and transfer of conversion loss data through USB plug and play features
• Automatic LO amplitude adjustment to compensate the cables loss (up to 3 m or 10 dB loss)
• Automatic detect mixer model/serial number when used with N9030A PXA, N9020A MXA, and N9010A EXA signal analyzers
    o  Automatic setting of the default frequency range and LO harmonic numbers
    o  Automatic LO alignment at start up
    o  Automatic run calibration when time and temperature changes

Improved DANL and TOI

• Excellent conversion loss of 25 dB maximum and excellent amplitude accuracy

The Keysight M1970W 75 to 110 GHz waveguide harmonic mixer is an un-preselected mixer that will extend the operating frequency range of N9030A PXA, N9020A MXA, and N9010A EXA signal analyzers up to 110 GHz. Smart features are embedded to help you to greatly simplify your overall test setup and improve your DANL and TOI of your test system. Go smart with harmonic mixing for your millimeter-wave applications.

Embedded smart features

• Automatic amplitude correction and transfer of conversion loss data through USB plug and play features
• Automatic LO amplitude adjustment to compensate the cables loss (up to 3 m or 10 dB loss)

• Automatic detect mixer model/serial number when used with N9030A PXA, N9020A MXA, and N9010A EXA signal analyzers
     o  Automatic setting of the default frequency range and LO harmonic numbers
     o  Automatic LO alignment at start up 
     o  Automatic run calibration when time and temperature changes 

Improved DANL and TOI

• Excellent conversion loss of 23 dB maximum and excellent amplitude accuracy

The Keysight M1970V 50 to 75/80 GHz waveguide harmonic mixer is an un-preselected mixer that will extend the operating frequency range of the N9030A PXA, N9020A MXA, and N9010A EXA signal analyzers up to 80 GHz. Smart features are embedded to help you to greatly simplify your overall test setup and improve your DANL and TOI of your test system. Go smart with harmonic mixing for your millimeter-wave applications.

The Keysight 346C noise source is the ideal companion to Keysight's noise figure solutions. Since it is broadband (10 MHz to 26.5 GHz), it eliminates the necessity for several sources at different frequency bands. The low SWR of the noise source reduces a major source of measurement uncertainty; reflections of test signals. Option K01 is a coaxial noise source and features coverage from 1 to 50 GHz with a 2.4 mm coaxial connector.

• Frequency range: 10 MHz to 26.5 GHz
• VSWR: < 1.35:1
• Connectors: BNC (f) input bias / 3.5 mm (m)
• Low SWR for reducing noise figure measurement uncertainty
• Individually calibrated ENR values at specific frequencies

Applications

• Transportable applications (can also be rack-mounted)

Functionality

• 2 slots for AXIe instrument modules
• Embedded AXIe system module
• High Power, 200W Cooling per slot

Performance characteristics

• Gigabit LAN connection to each module slot
• Gen 2 PCIe x8 interface to system controller provides up to a 4 GB/s data rate from external controller
• Gen 2 PCIe x4 links to each module slot (maximum 2 GB/s data rate)

The M9502A AXIe Chassis is fully compatible with the AXIe 1.0 specification. It includes an embedded system module (ESM) that does not take up an instrument slot. This system module performs the chassis management functions contained in the AXIe specification. Additionally, it provides PCI and LAN interfaces for connection to an external computer, external clock and trigger connectors, and Keysight-exclusive, inter-chassis synchronization connectors. The local bus implemented in the M9502A provides the maximum 62 pairs allowed by the AXIe specification. Combine the M9502A with the M9048A PCIe Desktop Adaptor to achieve the highest system bandwidth.

The M9502A is perfect for transportable applications that require a higher performance of AXIe. It can also be installed in a rack and the instrument modules slots are arranged horizontally to minimize rack space. This arrangement combined with a high-performance cooling system allows the chassis to be racked in only 2U of space. The M9502A is also designed to be easily maintained as both the power supply and fan tray can be removed while the chassis remains in the rack.

Applications

• Transportable applications (can also be rack-mounted)

Functionality

• 5 slots for AXIe instrument modules
• Embedded AXIe system module
• High Power, 200W Cooling per slot

Performance characteristics

• Gigabit LAN connection to each module slot
• Gen 2 PCIe x8 interface to system controller provide up to a 4 GB/s data rate from external controller
• Gen 2 PCIe x4 links to each module slot (maximum 2 GB/s data rate)

The M9505A AXIe Chassis is fully compatible with the AXIe 1.0 specification. It includes an embedded system module (ESM) that does not take up an instrument slot. This system module performs the chassis management functions contained in the AXIe specification. Additionally, it provides PCI and LAN interfaces for connection to an external computer, external clock and trigger connectors, and Keysight-exclusive, inter-chassis synchronization connectors. The local bus implemented in the M9505A provides the maximum 62 pairs allowed by the AXIe specification. Combine the M9505A with the M9048A PCIe Desktop Adaptor to achieve the highest system bandwidth.

The instrument modules slots are arranged horizontally to minimize rack space. This arrangement combined with a high-performance cooling system allows the chassis to be racked in only 4U of space. The M9505A is also designed to be easily maintained as both the power supply and fan tray can be removed while the chassis remains in the rack.

• Type-3.5 mm (f), 50 ohm, open, short, load, and through
• DC to 26.5 GHz
• Open phase error: 0 to 5 GHz ≤ 1.5°, 5 to 15 GHz ≤ 3.0°, 15 to 26.5 GHz ≤ 4.5°
• Short phase error: 0 to 5 GHz ≤ 1.0°, 5 to 15 GHz ≤ 2.5°, 15 to 26.5 GHz ≤ 4.0°
• Load return loss: 0 to 5 GHz ≥ 42 dB, 5 to 15 GHz, ≥ 36 dB, 15 to 26.5 GHz, ≥ 32 dB
• H x W x D ~ 68 x 37 x 14 mm

The 85521A 4-in-1 mechanical calibration module combines an open, short, load, and through in a compact unit. The product is small, easy to handle, and light weight. The through allows users to easily calibrate non-insertable devices, such as a cable or filter with female-female connectors. During the "thru" part of the calibration, the 85521A through can be used.

For more information about calibration kits, please visit Mechanical and Electronic Calibration Kits.

• 2.4 mm (f)
• Open, short, and load precision standards
• DC to 50 GHz
• Load return loss 26 to 42 dB, depending on frequency

The 85563A 3-in-1 mechanical calibration standard combines an open, short, and load standard in a compact unit. The product is small, easy to handle, and light weight. All standards in the 85563A are female 2.4 mm.

• Provides control of up to four CalPod calibration refresh modules.
• Can control up to 48 CalPod calibration refresh modules (requires additional accessories).

The operation of the CalPods is via VNA firmware, and the CalPod controller provides the control signals for operation of the CalPod calibration refresh modules. The CalPod controller interfaces with the PNA family and M937xA PXIe vector network analyzers.