How to Test 1.6T Electrical Receiver Conformance

Get Quote
Bit Error Ratio Tester
+ Bit Error Ratio Tester
Bit Error Ratio Tester
+ Bit Error Ratio Tester

Verify 1.6T Receiver Performance with High-Speed Stress Testing

Testing 1.6T electrical receivers requires generating and analyzing 224 Gbps PAM4 signals across high-speed lanes, typically defined by the IEEE 802.3dj and OIF-CEI-224G standards. Engineers must emulate worst-case operating conditions using calibrated stress patterns that include inter-symbol interference (ISI), sinusoidal, bounded, and unbounded random jitter, as well as broadband noise to emulate non-compensable impairments such as crosstalk and reflection. These stressed signals are injected into the receiver under test to verify its ability to operate in the worst-case condition. Typical performance metrics are bit error rate (BER) and Frame Loss Ratio (FLR). The setup demands precision signal generation, and high-bandwidth analysis tools capable of supporting symbol rates up to 120 GBd.

At these speeds, engineers face unique challenges in maintaining signal fidelity and calibration stability. The small eye openings of PAM4 signals at 112 GBd symbol rates are highly sensitive to reflections, noise, and dispersion, requiring complex equalization schemes such as multi-tap FFE and DFE. Manual calibration of stressed signals is time-consuming and error-prone due to the interdependence of parameters like SNDR and jitter. Additionally, the lack of finalized standards for 224 Gb/s electrical interfaces adds uncertainty, making flexible and adaptable test setups essential for both compliance and exploratory validation.

1.6T Electrical Receiver Conformance Solution

Validating 1.6T electrical receiver compliance requires generating stressed optical signals that emulate worst-case transmitter behavior. The Keysight 1.6T electrical receiver conformance solution consists of a 120 Gbd BERT for generating the stressed signal, a real-time oscilloscope with ≥90 GHz bandwidth for signal calibration, and the optical receiver compliance test automation software to control the instruments and run the tests. Together, they enable automated stressed signal calibration, BER analysis, and receiver conformance testing for 1.6T electrical interfaces following the IEEE 802.3dj recommendations.
Get Quote

See Demo of 1.6T Receiver Test

Explore Products in Our 1.6T Electrical Receiver Conformance Solution

Related Use Cases

How to Analyze PAM4 Receiver Signals

Analyzing PAM4 signals requires multiple-bit error rate (BER) and symbol error rate (SER) measurements. Learn how to characterize a PAM4 signal at the receiver fully.

Learn More

How to Characterize and Test for DDR5 Receiver Compliance

Test DDR5 receiver compliance with precision. Ensure high performance and accuracy in DDR5 designs. Learn more on Keysight's official page!

Learn More

How to Test PCIe® 5.0 Receiver Compliance

Verifying Peripheral Component Interconnect Express (PCIe) receiver compliance involves testing the PCIe® 5.0 device's receiver performance with a bit error ratio tester. Learn how to calibrate your stress signal and test for PCIe 5.0 receiver compliance with automated test tools.

Learn More

contact us logo

Get In Touch with One of Our Experts

Need Help Finding the Right Solution for You?

Contact Us