How to Perform PV Inverter Testing
Simulating PV arrays to test MPPT algorithms and circuits
Testing PV inverters requires engineers to verify the performance of the inverter’s maximum power point tracking (MPPT) algorithms and circuits. MPPT algorithms are complex, and under-the-sun testing at different temperatures and irradiance conditions is difficult, expensive, and time-consuming. The engineers also need to load and measure the output power of the PV inverter.
Escape the unpredictability of local weather conditions by using a PV / solar array simulator. Use a programmable DC power source to help simulate real-world PV / solar arrays, and test them against various environmental factors such as temperature, irradiance, age, and cell technology. Make sure to test the inverters according to the industry standards, such as EN50530, which provides a procedure for measuring the efficiency of MPPT. Use an AC / grid emulator to load and test the inverter’s output.
PV inverter test solution
See demo of the PV inverter test
Explore products in our PV inverter test solution
-
![]()
PV8932A Photovoltaic Array Simulator, 2000 V, 30 A, 30kW, 400/480 VAC
-
![]()
DG8901A License For Automated EN50530 Static and Dynamic MPPT Efficiency Testing
-
DG9112A Advanced Photovoltaic 12-Input Inverter Test Software
-
![]()
SL1213A Scienlab Regenerative AC Emulator, 1200 VAC, 65 A, 90 kVA, 3‑Phase
Discover resources and insights
Additional resources for PV inverter testing
Related use cases
-
![]()
Learn More
How to Improve Power Amplifier Linearity
Power amplifier (PA) efficiency requires algorithms such as digital pre-distortion (DPD) to enhance its linearity. Learn how to easily perform DPD measurements and troubleshoot your power amplifier in different scenarios.
Learn more
-
![]()
Learn More
How to Test Autonomous Driving NCAP Scenarios
Emulating complex traffic scenes requires a full-scene emulator that bridges the gap between software, simulation, and on-road testing. Learn how to quickly test autonomous driving systems with radar sensors to a high degree of confidence and with highly complex, multi-target scenes against New Car Assessment Program (NCAP) scenarios.
Learn more
-
![]()
Learn More
How to Measure Accurate EVM for a DUT in 5G NR Systems
Measuring the true performance of a device under test (DUT) in 5G new radio (NR) receivers requires suppressing the test system’s EVM noise floor, especially at higher frequency and wider bandwidth applications. Learn how to suppress system noise using two receiver systems to get accurate and reliable DUT EVM measurement in 5G NR frequency range 1 (FR1) and FR2 applications.
Learn more
-
![]()
Learn More
How to Characterize Automotive Serial Buses
Characterizing automotive serial buses requires debugging and correlating data transfers with other mixed-signal interactions. Learn how to use an oscilloscope and protocol decode software to debug CAN, CAN FD, CAN XL, LIN, and other automotive serial bus standards.
Learn more
-
![]()
Learn More
How to Monitor Battery Health and Temperature
Designing and testing battery systems in e-mobility applications requires precision measurements across many signal types, wide temperature ranges, and multiple channels. Learn how to use a data acquisition system, multi-channel switch multiplexer modules, DAQ PC application software, bidirectional DC power supplies, and various temperature sensors to monitor battery health and temperature.
Learn more
-
![]()
Learn More
How to Test Autonomous Driving NCAP Scenarios
Emulating complex traffic scenes requires a full-scene emulator that bridges the gap between software, simulation, and on-road testing. Learn how to quickly test autonomous driving systems with radar sensors to a high degree of confidence and with highly complex, multi-target scenes against New Car Assessment Program (NCAP) scenarios.
Learn more
Get in touch with one of our experts
Need help finding the right solution for you?