Choose a country or area to see content specific to your location
What are you looking for?
-
-
3D Interconnect Designer
3D Interconnect Designer provides a flexible modeling and optimization environment for any advanced interconnect structure, including chiplets, stacked die, packages, and PCBs.
-
Save up to 50% on an XR8 Oscilloscope
Get faster digital validation for less with a trade-in.
-
Discover Keysight AI Data Center Builder
Emulate every part of your data center infrastructure. Emulate Anything. Optimize Everything.
-
-
Introducing AI-Enhanced Packet Brokers
With extra memory and storage, these enhanced NPBs run Keysight's AI security and performance monitoring software and AI stack.
-
Precision In-Circuit Testing for Production
Achieve fast, accurate board-level testing with robust inline and offline ICT designed for modern manufacturing.
-
Accelerate Your Innovation Engine
Explore curated support plans, prioritized to keep you innovating at speed.
-
448 Gb/s Waveform Generation
Achieve 200+ Gbaud multi-level modulated signals with high-speed AWGs for digital and optical standards.
-
Stream 120 MHz I/Q Data to Your Laptop in the FieldPinpoint interference with post-processing spectrum management software in the lab.
Find the Right ATE Power SolutionUse this selector tool to quickly identify the best power supply for your aerospace and defense ATE requirements.
-
- Solutions
-
Authoritative application notes, data sheets, reference designs, and test procedures to accelerate design and validation decisions.
FeaturedHands‑on bootcamps that teach system design, test methods, and production workflows engineers can apply immediately.
Success Stories
HPE Juniper Networking Builds Next-Gen AI Infrastructure - Buy
-
Quick access to support related self-help tasks.
Additional content to support your product needs.
Do more with Keysight ServicesExplore services to accelerate every step of your innovation journey.
Accessories
Explore the complete portfolio of Keysight accessories designed to complement and extend your instruments. Use the filters below to quickly find compatible accessories such as modules, cables, adapters, and other system components to configure, expand, and optimize your test system for your specific measurement needs.
Showing 5 of 5
No Filter available
No Filter available
No Filter available
Common Interface Unit
The Keysight E7770A common interface unit (CIU) provides a bidirectional intermediate frequency (IF) interface to the device under test.
The Keysight E7770A common interface unit (CIU) provides a bidirectional intermediate frequency (IF) interface to the device under test.
Common Interface Unit
E7770A
The Keysight E7770A common interface unit (CIU) provides a bidirectional intermediate frequency (IF) interface to the device under test.
The Keysight E7770A common interface unit (CIU) provides a bidirectional intermediate frequency (IF) interface to the device under test (DUT) by up- or down-converting a sub-6 GHz uplink or downlink RF signal into a 6 to 12 GHz, or 7.7 to 14.5 GHz IF signal. This solution gives you the control, power, and local oscillator frequency input to the Keysight M1740A millimeter-wave (mmWave) transceiver for 5G remote radio heads (RRHs). As an up/down converter and RRH controller, the CIU supports the extension of the frequency coverage from sub-6 GHz to a high IF and mmWave bands.
The CIU is a key component of a wide range Keysight 5G solutions. These solutions provide the stimulus and analysis capabilities necessary to verify transceiver (Tx) and receiver (Rx) performance for 5G chipsets, devices, and base stations.
Quickly validate DUT performance over-the-air (OTA) with chambers designed for different test cases across the device workflow.
Performance Millimeter–Wave Transceiver, 24–49 GHz
The M1749B is the only remote radio head (24–49 GHz) supporting bi-directional testing at five mmWave frequency bands with one hardware set.
The M1749B is the only remote radio head (24–49 GHz) supporting bi-directional testing at five mmWave frequency bands with one hardware set.
Performance Millimeter–Wave Transceiver, 24–49 GHz
M1749B
The M1749B is the only remote radio head (24–49 GHz) supporting bi-directional testing at five mmWave frequency bands with one hardware set.
The M1749B is the only Remote Radio Head supporting bi-directional testing at five mmWave frequency bands with one hardware set. Two RF ports support Tx and Rx verification. Confidently test over the air at mmWave frequencies in the 24, 28, 39, 40 GHz, and 47 GHz bands using one M1749B remote radio head (RRH). Verify Tx and Rx performance of 5G RFFEs, base stations, chipsets, and devices using stimulus and analysis provided by one of several Keysight platforms. M1749B delivers an additional +3 dBm power compared to M1749A.
Transceiver Control Unit
S9165A Transceiver Control Unit supports up to 8 channels of signals for Keysight PROPSIM channel emulation solution, that enables you to perform 5G NTN aerospace and terrestrial links in a single solution.
S9165A Transceiver Control Unit supports up to 8 channels of signals for Keysight PROPSIM channel emulation solution, that enables you to perform 5G NTN aerospace and terrestrial links in a single solution.
Transceiver Control Unit
S9165A
S9165A Transceiver Control Unit supports up to 8 channels of signals for Keysight PROPSIM channel emulation solution, that enables you to perform 5G NTN aerospace and terrestrial links in a single solution.
Powering multi-channel emulation scenarios
Keysight S9165A Transceiver Control Unit is a solution component that works with other Keysight products providing LO, reference signals, and communication control for Keysight Remote Radio Head Transceivers.
When combined with the F8820A/B Propsim RF Channel Emulator and M1742A remote radio head transceiver, S9165A enables a K-band channel emulation solution, S8825A, for testing NTN aerospace satellite links.
The S9165A supports up to eight independent channels, options 010 - 080. The S9165A provides USB control, two independent local oscillators, and one reference frequency output per channel, enabling control of up to 8 Keysight Remote Radio Head Transceivers.
Millimeter-Wave Transceiver for 5G
The Keysight M1740A mmWave transceiver is a versatile remote radio head covering multiple frequency bands for Keysight 5G solutions to test at mmWave frequencies.
The Keysight M1740A mmWave transceiver is a versatile remote radio head covering multiple frequency bands for Keysight 5G solutions to test at mmWave frequencies.
Millimeter-Wave Transceiver for 5G
M1740A
The Keysight M1740A mmWave transceiver is a versatile remote radio head covering multiple frequency bands for Keysight 5G solutions to test at mmWave frequencies.
The Keysight M1740A millimeter-wave (mmWave) transceiver for 5G is a versatile remote radio head covering multiple frequency bands. Two mmWave ports provide transmit and receive paths between the device under test and the test and measurement equipment in the solution. Use the M1740A mmWave transceiver with the Keysight E7770A common interface unit (CIU). Easily validate DUT performance over-the-air (OTA) test with chambers designed for different test cases across the device workflow.
Keysight’s multi-band M1740A remote radio head (RRH) enables users to confidently test over-the-air (OTA) in millimeter-wave (mmWave) frequency bands, including 24, 28, 39, and 40 GHz bands. The M1740A uniquely supports bi-directional testing across four mmWave frequency bands with a single hardware set.
Verify transmitter (Tx) and receiver (Rx) performance of 5G RFFEs, base stations, chipsets, and devices including UE power class 1 fixed wireless access (FWA) devices such as customer-premises equipment (CPE) using stimulus and analysis provided by one of several Keysight platforms.
Millimeter-Wave Transceiver 24-49 GHz
The Keysight M1749A is a remote radio head supporting bi-directional testing at five mmWave frequency bands with one hardware set.
The Keysight M1749A is a remote radio head supporting bi-directional testing at five mmWave frequency bands with one hardware set.
Millimeter-Wave Transceiver 24-49 GHz
M1749A
The Keysight M1749A is a remote radio head supporting bi-directional testing at five mmWave frequency bands with one hardware set.
The M1749A is a Remote Radio Head supporting bi-directional testing at five mmWave frequency bands with one hardware set. Two RF ports support Tx and Rx verification. Confidently test over the air at mmWave frequencies in the 24, 28, 39, 40 GHz, and 47 GHz bands using one M1749A remote radio head (RRH). Verify Tx and Rx performance of 5G RFFEs, base stations, chipsets, and devices using stimulus and analysis provided by one of several Keysight platforms.
