What are you looking for?
Suggested searches
No product matches found - System Exception
Matched content
RP7930 and RP7940 Series Regenerative Power System Firmware
NOTE: Older firmware versions B.05.04.880 through B.03.01.1191 are not compatible with units that were shipped from factory with Firmware Revision B.06.01.953 or higher.
Keysight empfiehlt die Verwendung der aktuellen Version, die die neuesten verfügbaren Fehlerbehebungen und Sicherheitspatches enthält.
| Veröffentlichungsdatum | Version | Versionsbeschreibung |
|---|---|---|
| 2025-08-21 | B.06.05.1100 | RP7930 and RP7940 Series Firmware |
| Veröffentlichungsdatum | Version |
|---|---|
| 2025-08-21 | B.06.05.1100 |
| Version Description |
|---|
| RP7930 and RP7940 Series Firmware |
Wie geht das Herunterladen
- Click the Download button.
- Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
- Unzip the file to access the .upd file.
How to Install
- From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
-
It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.
Lizenzierung
- Does Not Require a License
Dokumentation
Add-On Software / Utilities
Installs on: Instrument
Betriebssystem
- Windows 7
- Windows 8
- Windows 10
Voraussetzungen
Download and install Firmware Update Utility software
Supported Instruments
- RP7931A, RP7932A, RP7933A, RP7935A, RP7936A, RP7941A, RP7942A, RP7943A, RP7945A, RP7946A
Wie geht das Herunterladen
- Click the Download button.
- Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
- Unzip the file to access the .upd file.
How to Install
- From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
-
It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.
Lizenzierung
- Does Not Require a License
Dokumentation
Add-On Software / Utilities
Installs on: Instrument
Betriebssystem
- Windows 7
- Windows 8
- Windows 10
Voraussetzungen
Download and install Firmware Update Utility software
Supported Instruments
- RP7931A, RP7932A, RP7933A, RP7935A, RP7936A, RP7941A, RP7942A, RP7943A, RP7945A, RP7946A
Wie geht das Herunterladen
- Click the Download button.
- Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
- Unzip the file to access the .upd file.
How to Install
- From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
-
It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.
Lizenzierung
- Does Not Require a License
Dokumentation
Add-On Software / Utilities
Installs on: Instrument
Betriebssystem
- Windows 7
- Windows 8
- Windows 10
Voraussetzungen
Download and install Firmware Update Utility software
Supported Instruments
- RP7931A, RP7932A, RP7933A, RP7935A, RP7936A, RP7941A, RP7942A, RP7943A, RP7945A, RP7946A
Wie geht das Herunterladen
- Click the Download button.
- Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
- Unzip the file to access the .upd file.
How to Install
- From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
-
It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.
Lizenzierung
- Does Not Require a License
Dokumentation
Add-On Software / Utilities
Installs on: Instrument
Betriebssystem
- Windows 7
- Windows 8
- Windows 10
Voraussetzungen
Download and install Firmware Update Utility software
Supported Instruments
- RP7931A, RP7932A, RP7933A, RP7935A, RP7936A, RP7941A, RP7942A, RP7943A, RP7945A, RP7946A
Wie geht das Herunterladen
- Click the Download button.
- Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
- Unzip the file to access the .upd file.
How to Install
- From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
-
It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.
Lizenzierung
- Does Not Require a License
Dokumentation
Add-On Software / Utilities
Installs on: Instrument
Betriebssystem
- Windows 7
- Windows 8
- Windows 10
Voraussetzungen
Download and install Firmware Update Utility software
Supported Instruments
- RP7931A, RP7932A, RP7933A, RP7935A, RP7936A, RP7941A, RP7942A, RP7943A, RP7945A, RP7946A
Wie geht das Herunterladen
- Click the Download button.
- Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
- Unzip the file to access the .upd file.
How to Install
- From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
-
It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.
Lizenzierung
- Does Not Require a License
Dokumentation
Add-On Software / Utilities
Installs on: Instrument
Betriebssystem
- Windows 7
- Windows 8
- Windows 10
Voraussetzungen
Download and install Firmware Update Utility software
Supported Instruments
- RP7931A, RP7932A, RP7933A, RP7935A, RP7936A, RP7941A, RP7942A, RP7943A, RP7945A, RP7946A
Wie geht das Herunterladen
- Click the Download button.
- Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
- Unzip the file to access the .upd file.
How to Install
- From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
-
It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.
Lizenzierung
- Does Not Require a License
Dokumentation
Add-On Software / Utilities
Installs on: Instrument
Betriebssystem
- Windows 7
- Windows 8
- Windows 10
Voraussetzungen
Download and install Firmware Update Utility software
Supported Instruments
- RP7931A, RP7932A, RP7933A, RP7935A, RP7936A, RP7941A, RP7942A, RP7943A, RP7945A, RP7946A
Wie geht das Herunterladen
- Click the Download button.
- Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
- Unzip the file to access the .upd file.
How to Install
- From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
-
It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.
Lizenzierung
- Does Not Require a License
Dokumentation
Add-On Software / Utilities
Installs on: Instrument
Betriebssystem
- Windows 7
- Windows 8
- Windows 10
Voraussetzungen
Download and install Firmware Update Utility software
Supported Instruments
- RP7931A, RP7932A, RP7933A, RP7935A, RP7936A, RP7941A, RP7942A, RP7943A, RP7945A, RP7946A
Wie geht das Herunterladen
- Click the Download button.
- Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
- Unzip the file to access the .upd file.
How to Install
- From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
-
It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.
Lizenzierung
- Does Not Require a License
Dokumentation
Add-On Software / Utilities
Installs on: Instrument
Betriebssystem
- Windows 7
- Windows 8
- Windows 10
Voraussetzungen
Download and install Firmware Update Utility software
Supported Instruments
- RP7931A, RP7932A, RP7933A, RP7935A, RP7936A, RP7941A, RP7942A, RP7943A, RP7945A, RP7946A
Wie geht das Herunterladen
- Click the Download button.
- Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
- Unzip the file to access the .upd file.
How to Install
- From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
-
It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.
Lizenzierung
- Does Not Require a License
Dokumentation
Add-On Software / Utilities
Installs on: Instrument
Betriebssystem
- Windows 8
- Windows 7
- Windows 10
Voraussetzungen
Download and install Firmware Update Utility software
Supported Instruments
- RP7931A, RP7932A, RP7933A, RP7935A, RP7936A, RP7941A, RP7942A, RP7943A, RP7945A, RP7946A
Wie geht das Herunterladen
- Click the Download button.
- Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
- Unzip the file to access the .upd file.
How to Install
- From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility.
-
It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.
Lizenzierung
- Does Not Require a License
Dokumentation
Add-On Software / Utilities
Installs on: Instrument
Betriebssystem
- Windows 8
- Windows 7
- Windows 10
Voraussetzungen
Download and install Firmware Update Utility software
Supported Instruments
- RP7931A, RP7932A, RP7933A, RP7935A, RP7936A, RP7941A, RP7942A, RP7943A, RP7945A, RP7946A
Wie geht das Herunterladen
- Click the Download button.
- Save the file to your computer and note the directory where the file is saved. A firmware update installed over the LAN, GPIB, or USB interface is a file with a .upd extension.
- Unzip the file to access the .upd file.
How to Install
From the utility directory or Start menu, start the utility (FWUpdate.exe). The utility will prompt you for the location of the .upd file. Follow the additional prompts to complete the installation. The update may take several seconds to complete and will reboot the instrument. After the update is complete, exit the utility. It is not necessary to re-calibrate the instrument following a firmware-update; however, the instrument may need to be re-secured if it was unsecured to perform the update.
Lizenzierung
- Does Not Require a License
Dokumentation
Add-On Software / Utilities
Installs on: Instrument
Betriebssystem
- Windows 8
- Windows 7
- Windows 10
Voraussetzungen
Download and install Firmware Update Utility software
Supported Instruments
- RP7941A, RP7942A, RP7943A, RP7945A
SHOW MORE