Here's the page we think you wanted. See search results instead:

Highlights

Fast, Easy, and Accurate Calibration of Vector Network Analyzers

The Keysight N4432D is a precision 4-port ECal module that supports selection of Type-N and 3.5 mm connectors mixed up to 18 GHz. Select either female-female, male-male, or female-male connectors.

Option 0DC extends the calibration frequency range down to DC for broadband device modeling or time domain and signal integrity analysis using enhanced time domain-analysis on Keysight network analyzers.

Perform a full 4-port calibration in less than half the time and number of connections when compared to traditional mechanical cal kits. Simply connect the ECal module to the vector network analyzer via USB and the firmware controls the rest, thus reducing the chance for operator error. Reduce wear and tear on connectors and lower repair costs on the test port connectors and calibration standards.

  • Precision 4-port RF ECal module with high accuracy
  • Frequency coverage from DC/300 kHz to 18 GHz
  • Fast, easy, and accurate full 4-ports calibration
  • Supports multiple connectors mixed of Type-N, and 3.5 mm connectors. Connectors selection covers both female and male connectors type.
  • Direct control from Keysight vector network analyzers via USB
N4432D RF Electronic Calibration Module (ECal)

Interested in a N4432D?

Featured Resources

Application Notes 2023.03.06

Specifying Calibration Standards and Kits for Keysight Vector Network Analyzers

Specifying Calibration Standards and Kits for Keysight Vector Network Analyzers

This application note covers calibration standard definitions, calibration kit content, and the structure requirements for Keysight's vector network analyzers.

2023.03.06

Reference Guides 2022.08.01

Reference Guide 8509xD,N443xD, N469xD, & N755xA Electronic Calibration Modules

Reference Guide 8509xD,N443xD, N469xD, & N755xA Electronic Calibration Modules

The purpose of this manual is to help you use your Electronic Calibration (ECal) module confidently and effectively. ECal is a precision, single-connection calibration technique which uses fully traceable and verifiable electronic standards. Each module has unique S-parameter data that is stored in the module's memory. During calibration, ECal uses this data to calculate the error terms for your network analyzer.This manual provides instructions for operating and maintaining your ECal module. Also included are mechanical specifications and replaceable parts available for each model.The 85091/2/3/4/6/8/9D series provide two-port calibration solutions with operating frequencies starting as low as DC and ending as high as 9 GHz. The N4690/1/2/3/4/6D series provide two-port calibration solutions with operating frequencies starting as low as DC and ending as high as 67 GHz. and N7550/1/2/3/4/5A/56A series provide two-port calibration solutions with operating frequencies starting as low as DC and ending as high as 26.5 GHz50 GHz. The N4431/2/3D/56A series provide four-port calibration solutions with operating frequencies starting as low as DC and ending as high as 26.5 GHz.

2022.08.01

Reference Guides 2021.04.01

8509xC/N443xD/N469xD/N755xA Electronic Calibration Modules Security Features and Volatility Documentation

8509xC/N443xD/N469xD/N755xA Electronic Calibration Modules Security Features and Volatility Documentation

This document describes Electronic Calibration (ECal) instrument security features and the steps todeclassify an instrument through memory sanitization or removal. Foradditional information please go to http://www.Keysight.com/find/ad andsecurity instrument tab.

2021.04.01

Technical Overviews 2017.11.30

E5071C ENA Calibration Down to 9 kHz Using the N4431A/B 4-Port ECal Modules

E5071C ENA Calibration Down to 9 kHz Using the N4431A/B 4-Port ECal Modules

This application note shows how to calibrate the ENA E5071A down to 9 kHz using a modeling method with E5071C ENA firmware revision 9.1 and the 4-port ECal N4431A/B.

2017.11.30

Quick Start Guides 2019.08.30

N443xD Electronic Calibration Module – 4-Port QSG

N443xD Electronic Calibration Module – 4-Port QSG

N443xD ECal Quick Start Guide

2019.08.30

Technical Overviews 2022.06.29

Electronic Calibration (ECal) Modules for Vector Network Analyzers

Electronic Calibration (ECal) Modules for Vector Network Analyzers

The N756xA/AEP is a world first portable and configurable multiport ECal that supported up to 36-ports. They are available from DC to 9/20 GHz. This is an ideal calibration solution for multiport measurement application such as high-volume PA/FEM, massive MIMO or high-speed digital interconnects applications that often come with higher number of test port requirement

2022.06.29

Installation Guides 2019.10.30

N443XD 4-Port ECals - Unbox Poster

N443XD 4-Port ECals - Unbox Poster

Follow this process to install your N443xD ECal module

2019.10.30

View All Resources

View All Resources

Want help or have questions?

Contact Us