Highlights

Designed For The Most Demanding Requirements From Research And Development To Manufacturing

The Keysight E5072A vector network analyzer, with a configurable test set, provides access to the signal paths between the internal source, receivers, bridges, and the analyzer’s test ports. The direct access improves instrument sensitivity as well as the ability to add components or peripherals for a variety of applications. The E5072A delivers new standards in versatility, speed, and accuracy, and is suitable for full performance characterization of passive and active components such as antennas, filters, and high-power amplifiers.

  • Choose frequency from 30 kHz to 4.5 GHz or 8.5 GHz; 2 ports
  • Improve accuracy, yield, and margins with a wide dynamic range of 130 dB / 151 dB with direct receiver access
  • Increase throughput with measurement speeds of 7 ms at full 2-port calibration, 401 points
  • Reduce calibration time with excellent temperature stability of 0.005 dB/°C
  • Gain test flexibility with a wide source power range of -109 to +20 dBm for linear and nonlinear device characterization
  • Easy to configure test set provides access to the signal paths between the internal source, receivers, bridges, and the analyzer’s test ports

High-Power Measurement

High-power measurements are necessary to characterize devices under real conditions. These measurements are cumbersome if external amplifiers and attenuators are attached to a network analyzer's test ports. The E5072A reduces the need for external power sources by delivering up to +20 dBm from its test ports. For measurements above +20 dBm, the E5072A's configurable test set provides direct source and receiver paths for simple test setup and error correction for external devices.

E5072A Software

Network analyzer software tools enable you to investigate, characterize, and troubleshoot your designs in a variety of measurement applications. Simplify complex measurements on your E5072A with software applications such as wireless power transfer analysis, frequency offset mode, time domain analysis, and more.

E5072A-010 Time Domain Analysis

View transmission and reflection responses in the time domain. Tune filters, gate out fixtures and cables, and characterize tranmission lines.  

E5072A-008 Frequency Offset Mode

Set the receivers to a different frequency than the sources to make harmonic distortion measurements and mixer/frequency converter measurements.

E5072A-006 Wireless Power Transfer Analysis

Measure Wireless Power Transfer (WPT) efficiency between coils or resonators in real-time with arbitrary load impedance setting.  

KEY SPECIFICATIONS

Number of Built-In Ports
2 ports
Dynamic Range
123 dB
Maximum Frequency
8.5 GHz
Output Power
16 dBm
Trace Noise
0.003 dBrms
Type
Benchtop
Number of Built-In Ports
Dynamic Range
Maximum Frequency
Output Power
Trace Noise
Type
2 ports
123 dB
8.5 GHz
16 dBm
0.003 dBrms
Benchtop
View More
Applications:
Far-Field/Near-Field Antenna Range
Gain Compression
S-Parameters
Return Loss
Insertion Loss/Gain
Best Speed at 201 Point, 1 Sweep:
3 ms
Components:
Amplifiers
Cables
Mixers/Frequency Converters
Resonators
Antenna/Coil/RFIDs
Filters
LCR Components
Dynamic Range:
123 dB
Harmonics:
-25 dBc
Maximum Frequency:
8.5 GHz
Noise Floor:
-128 dBm
Number of Built-In Ports:
2 ports
Output Power:
16 dBm
Type:
Benchtop
Trace Noise:
0.003 dBrms

Interested in a E5072A?

Want help or have questions?