Choose a country or area to see content specific to your location
What are you looking for?
WirelessPro empowers you to model, simulate, and analyze various aspects of 5G networks, 5G Advanced technologies, and future 6G wireless channels with unparalleled ease and accuracy.
Get faster, clearer insights with our new multicore, 12-bit oscilloscope up to 33 GHz.
Emulate every part of your data center infrastructure. Emulate Anything. Optimize Everything.
Accelerate signal analysis testing with Keysight’s VSA software. Visualize, demodulate, and troubleshoot with over 75+ signal standards with precision.
With extra memory and storage, these enhanced NPBs run Keysight's AI security and performance monitoring software and AI stack.
Achieve fast, accurate board-level testing with robust inline and offline ICT designed for modern manufacturing.
Explore curated support plans, prioritized to keep you innovating at speed.
Pinpoint interference with post-processing spectrum management software in the lab.
Our high-density ATE power supplies end trade-offs between test throughput and precision.
Explore engineer-authored content and a vast knowledge base with thousands of learning opportunities.
Keysight Learn offers immersive content on topics of interest, including solutions, blogs, events, and more.
Quick access to support related self-help tasks.
Additional content to support your product needs.
Explore services to accelerate every step of your innovation journey.
Explore the complete portfolio of Keysight accessories designed to complement and extend your instruments. Use the filters below to quickly find compatible accessories such as modules, cables, adapters, and other system components to configure, expand, and optimize your test system for your specific measurement needs.
No Filter available
No Filter available
N1027A
N1027A is a collection of accessories for mainframes and modules in the 86100 family of Digital Communication Analyzers (DCAs).
Click the “View Technical Overview” button at the top of this page for:
N1027A is a collection of accessories for DCA-X mainframes, modules, and stand-alone DCA-Ms in Keysight's Digital Communication Analyzer (DCA) family. The accessories can be grouped into:
BT2182A
BT2181A and BT2182A are for 16 measurement channels; connects to DB37(f) on BT2152B rear panel.
Keysight's BT2182A cable (4 m) are for 16 measurement channels to connects the DB37(f) on the Keysight BT2152B rear panel. The cable has 18 pairs of twisted wires with shield and braided shield around bundle of twisted pairs; only 16 pairs are necessary for current measurement with the BT2152B. The braid connects to the connector housing on both ends of cable; connector pins are machined.
Learn more about Keysight's self-discharge measurement solutions.
Y1200B
Connect an M9502A/M9505A AXIe chassis or M9018A PXIe chassis with M9021A cable interface to a laptop computer.
The Y1200B PCIe cable is used with the M9045B to connect an M9502A/M9505A AXIe chassis or M9018A PXIe Chassis with M9021A cable interface to a laptop computer.
N9910X
N9910X RF and microwave handheld accessories complement Keysight's installation and maintenance test tools.
N9910X RF and microwave handheld accessories complement Keysight's installation and maintenance test tools.
These accessories provide you with a complete solution when using Keysight tools for your measurement needs.
AE6953A
Automotive Adapter AE6953A Mini 50 cable is designed for Automotive Ethernet MDI interface connections, with frequency range up to 6 GHz, length of 1m.
Molex Mini-50 adapter offers a simple way of connecting to your automotive MDI interface. This cable can be used for connections and tests of automotive Ethernet 100BASE-T1 or 1000BASE-T1. The Keysight AE6953A Mini-50 to Mini-50 cable offers a simple way of connecting to your automotive MDI interface. It is designed for the frequency range from DC to 6 MHz.
11059A
Reduce ground-related errors and contact resistance through gold-plated flat tweezers and special gripping surfaces
The Keysight kelvin probe set consists of two gold-plated flat tweezers with special gripping surfaces. This design assures a very precise contact to the component and very precise measurements. The ground guard connector removes ground-related errors. The gold plating helps to reduce the contact resistance between the surfaces of the test probe and the lead of the component being measured - reducing overall error!
The Keysight 11059A is compatible with the Keysight 34460A, 34461A, 34401A, 3458A, 34410A, 34411A, 34465A, 34470A digital multimeters and B2900 series precision source / measure units.
PX0101A
The cable converting ferrule terminals to BNC terminal.
The Keysight PX0101A converts ferrule terminals to BNC terminal for trigger or interlock connection. It supports the Keysight M9601/02/03/14/15A.
Cable length (options)
N1297B
The N1297 Series is a collection of banana-triax adapters for the Keysight B2900 Series precision source measure unit (SMU). It consists of both 2-wire as well as 4-wire connection requirements.
The N1297B is the banana-triax adapter for 4-wire (Kelvin) connection supports low current measurement for less than 1 nA by enabling the use of high-performance triaxial cables. This solution makes it easy to connect to both triaxial-based test fixtures and wafer probers.
U2031B
The U2031B sensor cable is compatible with the Keysight USB power sensors.
The U2031B USB2.0 compliance cable with USB Mini-B connector and locking mechanism, length 3 meters (10ft). It is compatible with the Keysight USB power sensors.

AC69PAR1
AC69PAR1 is a parallel operation cable that can support up to four units of the AC6900 Series.
The Keysight AC69PAR1 is a parallel operation cable that enables up to four units of the AC6900 Series power sources.
AC69SYN1
The AC69SYN1 is a synchronization cable for synchronizing power switches on parallel units.
The Keysight AC69SYN1 cable synchronizes power switches on parallel units, enabling all secondary units to turn on automatically when you switch on the primary unit.
11730F
61 m / 200 ft power Sensor cable for 8480 and E-Series power sensors
The 11730F is a 61 m / 200 ft power sensor cable. The 11730 series power sensor cables are used with the 8480 and E-Series power sensors (except the E9320 family of peak and average sensors).