Here's the page we think you wanted. See search results instead:

4-Channel D/A Converter with Waveform Memory for 34980A

Four analog channels that can output up to +/-16 V DC or +/-20 mA DC with 1Mbye of memory for creating waveforms.

prod_image

  • Comments

    Output DC voltage up to +/-16 V or DC current up to +/-20 Output waveforms with a 200 kHz update rate and 16 bits of resolution. memory can stor 500,000 point waveforms

  • Channels/Crosspoints

    4

  • Maximum Inputs/Outputs (V, I)

    16V, 20mA

  • Speed or Frequency

    200 kHz

  • Inputs/Outputs

    0 - 50 Volts

  • Platform

    34980A

  • Terminals/Connectors/Cables

    34951T Y1135A Y1136A Y1141A

  • Number of channels

    4

  • Module type

    Multifunction

  • Speed

    N/A

  • Frequency

    200 kHz

  • Mainframe Compatibility

    34980A

sortDropdown icon View Data Sheet

Top configurations

See what's included, and how you can upgrade your experience with Keysight.

34951A 4-Channel D/A Converter with Waveform Memory for 34980A
34951A 4-Channel D/A Converter with Waveform Memory for 34980A

Model:

34951A

QTY

Options

1

Four Channel Isolated D/A Converter with Waveform Memory for 34980A | KeysightCare Technical Support - 3 years | Return to Keysight Warranty - 3 years.

1

Standard Firmware for 34951A (For Firmware 2.17)

1

Calibration Plan - Return to Keysight - 3 years

Highlights

  • Four isolated analog outputs
  • Output up to +/-16V DC or +/-20mA DC
  • 16-bits of resolution
  • 200 kHz update rate
  • Default standard waveforms
  • Onboard memory to create your own waveforms

The Keysight 34951A module for the 34980A Multifunction Switch/Measure Unit has four electronically calibrated analog channels that can output up to +/-16V DC or +/-20mA DC with 16 bits of resolution. Each channel can be updated individually with a 200 kHz update rate. You can use the standard waveforms provided or create your own with over 500,000 points. These points can be dynamically allocated among one or more channels and output as a point-to-point arb.

These D/As are useful to source bias voltages to your device under test, to control your analog programmable power supplies, or use the outputs as setpoints for your control systems. Standard 50-pin Dsub connectors allow for use with standard cables, terminal blocks, or mass interconnect solutions.

Services and support