All Software Catalog

Get Deep Insights Into the Power Consumption of Your Device With Event-Based Power Analysis

The KS833A2A PathWave Event-Based Power Analysis Software can effectively capture and display the charge consumption profile at subsystem level as your device transitions through various operating states. When used with the X8712A IoT Device Battery Life Optimization Solution, you can estimate the battery life of your device based on the profile, helping you to identify the contribution of these subsystems to the current draw.

• Get auto correlation between the critical RF or DC events from each of your device’s subsystems to the current consumption
• Effectively capture and display the dynamic current consumption of your device as it transitions between different operating states 
  
• Measure and save data up to eight days

• Analyze your device’s current consumption profile based on the RF and/or DC events including battery life estimation, total charge, CCDF chart and more
• Supports various radio technologies — Bluetooth® 5, WLAN, Zigbee, NB-IoT, LoRa, and Sigfox
  

• Measure and display transmitter power and timing statistics beyond the average for the individual channels including a chart of power versus time
• Continuous trigger transmitter power to determine behavior and characteristics of the IoT device
• Quick view of transmitter power, receiver PER of multiple IoT devices operate concurrently
• Monitor changes in advertising interval with the advertising interval trend chart

The X8722A IoT Soft Front Panel supports IOT8720A and IOT8740A, an intuitive software interface that allows you to quickly conduct tests without needing to spend a lot of time writing test software. It provides simple operation with powerful visualization, allowing you to easily evaluate and control your hardware, as well as automate and speed up testing.

The Soft Front Panel comes in two versions: IoT Soft Front Panel Utility (free) and IoT Soft Front Panel Pro (licensed).

IoT Soft Front Panel Utility (Free)

• Provide basic measurements such as transmitter power, receiver PER results, and basic transmitter power envelope display
• Enable basic functionalities such as firmware upgrade, radio option, or software license enablement, perform self-test and display SCPI logs
• IoT Soft Front Panel Utility is available on the XA8722 software download page 

IoT Soft Front Panel Pro (Licensed)

• Provide various views – Quick view, PER trend chart, advertising interval trend chart, transmitter power measurement trend chart, scan response data throughput trend chart, transmitter power envelope display, multi-DUT view, and utility view
• Enable advanced measurement capabilities – Provide channel-based transmitter power and receiver PER measurements with the minimum, maximum, and average readings for all measurement parameters. Configure upper and lower limits and perform the limit checks with pass-fail indicators. Export test results into CSV file format for post-analysis
• Software installer and the 30 days trial license are available on the XA8722A software download page

• Offer great flexibility to designers and engineers to customize test sequences and test steps to test IoT devices
• Sample test plans provided include BLE signaling test plans for single-DUT, multi-DUT, receiver sensitivity, and more
• Easy to use interface with the Keysight KS8400A PathWave Test Automation Platform, with data reporting

The XA8723A IoT Signaling Measurement Suite supports IOT8720A and IOT8740A, is a plug-in that runs on Keysight KS8400A PathWave Test Automation Platform (TAP). It contains test steps that enable BLE signaling connection, transmitter power measurements, receiver PER, sensitivity, and many other measurements, for both single DUT and multidevice parallel testing configurations. The measurement suite plug-in comes with sample test plans.

The software provides powerful, flexible, and extensible test sequence and test plan creation with additional capabilities that optimize your test software development and overall performance. TAP provides a graphical user interface (GUI) so that both beginner and experienced programmers can quickly construct test plans consisting of multiple test steps. Flow operations are supported, along with parallel testing.

Software installer and the 30 days trial license are available on the XA8723A software download page.

Powerful test sequence & test plan creation

• Fast execution and test flow visualization, analysis and insights
• Scalable modular “plug-in” software architecture. Take advantage of provided plug-ins, or create your own.
• Built on the PathWave software platform and the OpenTAP open-source test sequencer
  

Licensing

• Fixed (node-locked, single PC), transportable and network/floating licenses with either perpetual or annual time frame

PathWave Test Automation provides powerful, flexible and extensible test sequencing and test plan creation with additional capabilities that optimize your test software development and overall performance. Built on the PathWave software platform, PathWave Test Automation enables you to quickly create your test solutions, maximize your team’s productivity, and accelerate your products’ time-to-market.

The Keysight XA5004A test software addresses the test requirements of the most recent versions of the European Telecommunications Standards Institute (ETSI) EN 300 328 (V2.2.2), EN 301 893 (V2.1.1), and EN 303 687 (draft). This test software solution is a subset of Keysight’s XA5001A test software, covering non-signaling tests such as RF output power, occupied channel bandwidth, power spectral density, spurious emissions, and hopping frequency separation.

Together with the Keysight IOT0047A regulatory test solution, the IoT regulatory compliance software can help you simplify and accelerate wireless IoT device testing.

• Enhance testing and post-test analysis with the efficient, modern graphical user interface (GUI).
• Save time when debugging failed tests by selecting a group of test cases and accessing specific signal paths.
• Understand and interpret results presented in easy-to-read graphs and tables quickly.

The dedicated Keysight XA5003A dynamic frequency selection (DFS) test software addresses the test requirements of ETSI EN301 893 V2.1.1, EN302 502 V1.2.1, FCC-06-96, FCC-13-22, Japan MIC 2019-07, Korea, and China. Together with Keysight’s IOT0047A regulatory test solution, the IoT regulatory compliance software can help you simplify and automate DFS testing.

• Respond to detection bandwidth and statistical performance check of radar signals.
• Monitor changes in channel available check (CAC) time, off-channel CAC, and channel move time.
• Test cycles repetitively for various radar signal types and test frequencies.
• Tabulate complete test results as a report in several popular file formats.

The Keysight XA5001A test software addresses the test requirements of the most recent versions of the European Telecommunications Standards Institute (ETSI) EN 300 328 (V2.2.2), EN 301 893 (V2.1.1), and EN 303 687 (draft). This software solution covers test items such as occupied channel bandwidth, adaptivity, and receiver blocking. Together with the Keysight IOT0047A regulatory test solution, the IoT regulatory compliance software can help you simplify and accelerate wireless IoT device testing.

• Enhance testing and post-test analysis with the modern graphical user interface (GUI).
• Save time when debugging failed tests by selecting a group of test cases and accessing specific signal paths.
• Understand and interpret results presented in easy-to-read graphs and tables quickly.

Keysight’s XA5005A test software addresses the test requirements of the most recent versions of the European Telecommunications Standards Institute (ETSI) EN 300 328 (V2.2.2), EN 301 893 (V2.1.1), and EN 303 687 (draft). This test software solution is a subset of XA5001A test software, covering signaling tests, such as adaptivity and receiver blocking.

Together with the Keysight IOT0047A regulatory test solution, the IoT regulatory compliance software can help you simplify and accelerate wireless IoT device testing.

• Enhance testing and post-test analysis with the modern graphical user interface (GUI).
• Save time when debugging failed tests by selecting a group of test cases and accessing specific signal paths.
• Understand and interpret results presented in easy-to-read graphs and tables quickly.
  

The Keysight XA5002A test software addresses the test requirements of the most recent versions of the Federal Communications Commission (FCC) Part 15.247 and Part 15.407. This software solution covers test items such as band edge, spurious emission, and channel separation. Together with Keysight’s IOT0047A regulatory test solution, the IoT regulatory compliance software can help you simplify and accelerate wireless IoT device testing.

• Enhance testing and post-test analysis with the modern graphical user interface (GUI).
• Save time when debugging failed tests by selecting a group of test cases and accessing specific signal paths.
• Understand and interpret results presented in easy-to-read graphs and tables quickly.