Choose a country or area to see content specific to your location
What are you looking for?
-
-
Integrated Physics Suite
Bridging design and physical testing to evaluate drop, impact, shock, and vibration compliance before hardware exists.
-
Buy an Expert Oscilloscope, Boost Your Bandwidth
Unlock your free upgrade to the next bandwidth tier.
-
End-to-End Validation for AI Data Center
Strengthen 1.6T network reliability for AI-scale workloads from transceivers to interconnects.
-
Take On Complex MIMO Signals
Pair Keysight VSA software with the new XA5 signal analyzer for advanced visualization, demodulation, and analysis — start your 30-day trial today.
-
Introducing AI-Enhanced Packet Brokers
With extra memory and storage, these enhanced NPBs run Keysight's AI security and performance monitoring software and AI stack.
-
Accelerate Semiconductor Innovation
Explore end-to-end workflows spanning IC design, validation, wafer test, and photonics.
-
Accelerate Your Innovation Engine
Explore curated support plans, prioritized to keep you innovating at speed.
-
448 Gb/s Waveform Generation
Achieve 200+ Gbaud multi-level modulated signals with high-speed AWGs for digital and optical standards.
-
The Right Connection Makes the Measurement
Maximize accuracy and performance with precision accessories engineered for Keysight instruments.
Analyze Complex RF Signals FasterExplore dual-channel and ultra-wideband signal analysis for demanding RF workflows.
Digital Validation. Faster.Get faster, clearer insights with our new multicore, 12-bit oscilloscope up to 33 GHz. Trade in your old oscilloscope and get credit toward a new XR8.
-
- Solutions
-
Authoritative application notes, data sheets, reference designs, and test procedures to accelerate design and validation decisions.
FeaturedHands‑on bootcamps that teach system design, test methods, and production workflows engineers can apply immediately.
Success Stories
HPE Juniper Networking Builds Next-Gen AI Infrastructure -
Quick access to support related self-help tasks.
Additional content to support your product needs.
Do more with Keysight ServicesExplore services to accelerate every step of your innovation journey.
Accessories
Explore the complete portfolio of Keysight accessories designed to complement and extend your instruments. Use the filters below to quickly find compatible accessories such as modules, cables, adapters, and other system components to configure, expand, and optimize your test system for your specific measurement needs.
Showing 12 of 85
No Filter available
No Filter available
No Filter available
Thermocouple Power Sensors
N8482A thermocouple power sensor, 100 kHz to 6 GHz, -35 to +20 dBm; drop-in replacement for 8480 Series sensors.
N8482A thermocouple power sensor, 100 kHz to 6 GHz, -35 to +20 dBm; drop-in replacement for 8480 Series sensors.
Thermocouple Power Sensors
N8482A
N8482A thermocouple power sensor, 100 kHz to 6 GHz, -35 to +20 dBm; drop-in replacement for 8480 Series sensors.
- Wide frequency range from 100 kHz to 6 GHz
- Wide dynamic range from -35 to +20 dBm
- EEPROM to store cal factors eliminates manual entry
- Power linearity of less than 1%, excellent SWR of mismatch uncertainty, and highly accurate power repeatability
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST)
- SCPI codes compatible with 8480 series (option CFT)
Note: Option CFT is available to replace legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters.
- SCPI codes compatible with E-Series sensor (standard option)
- Compatible with EPM (N1913/14B, N1913/14A & E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A & N8262A) power meters
Note: All N8480 series power sensors are incompatible with the Keysight 43x, E1416A, 5314x microwave counters, and E7495x base station test sets.
Thermocouple Power Sensors
N8481B thermocouple power sensor, 10 MHz to 18 GHz, -5 to +44 dBm; drop-in replacement for 8480 Series sensors.
N8481B thermocouple power sensor, 10 MHz to 18 GHz, -5 to +44 dBm; drop-in replacement for 8480 Series sensors.
Thermocouple Power Sensors
N8481B
N8481B thermocouple power sensor, 10 MHz to 18 GHz, -5 to +44 dBm; drop-in replacement for 8480 Series sensors.
- Wide frequency range from 10 MHz to 18 GHz
- Wide dynamic range from -5 to +44 dBm
- EEPROM to store cal factors eliminates manual entry
- Power linearity of less than 1%, excellent SWR of mismatch uncertainty, and highly accurate power repeatability
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST)
- SCPI codes compatible with 8480 series (option CFT)
Note: Option CFT is available to replace legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters.
- SCPI codes compatible with E-Series sensor (standard option)
- Compatible with EPM (N1913/14B, N1913/14A & E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A & N8262A) power meters
Note: All N8480 series power sensors are incompatible with the Keysight 43x, E1416A, 5314x microwave counters, and E7495x base station test sets.
Thermocouple Power Sensors
N8486AQ waveguide thermocouple power sensor, 33 to 50 GHz, -35 to +20 dBm; replaces 8480 Series waveguide sensors.
N8486AQ waveguide thermocouple power sensor, 33 to 50 GHz, -35 to +20 dBm; replaces 8480 Series waveguide sensors.
Thermocouple Power Sensors
N8486AQ
N8486AQ waveguide thermocouple power sensor, 33 to 50 GHz, -35 to +20 dBm; replaces 8480 Series waveguide sensors.
- Wide frequency range from 33 to 50 GHz
- Wide dynamic range from -35 to +20 dBm
- EEPROM to store cal factors eliminates manual entry
- Power linearity of less than 1%, excellent SWR of mismatch uncertainty, and highly accurate power repeatability
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST)
- SCPI codes compatible with 8480 series (option CFT)
Note: Option CFT is available to replace legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters.
- SCPI codes compatible with E-Series sensor (standard option)
- Compatible with EPM (N1913/14B, N1913/14A & E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A & N8262A) power meters
Note: All N8480 series power sensors are incompatible with the Keysight 43x, E1416A, 5314x microwave counters, and E7495x base station test sets.
Thermocouple Power Sensors
N8486AR waveguide thermocouple power sensor, 26.5 to 40 GHz, -35 to +20 dBm; replaces 8480 Series waveguide sensors.
N8486AR waveguide thermocouple power sensor, 26.5 to 40 GHz, -35 to +20 dBm; replaces 8480 Series waveguide sensors.
Thermocouple Power Sensors
N8486AR
N8486AR waveguide thermocouple power sensor, 26.5 to 40 GHz, -35 to +20 dBm; replaces 8480 Series waveguide sensors.
- Wide frequency range from 26.5 to 40 GHz
- Wide dynamic range from -35 to +20 dBm
- EEPROM to store cal factors eliminates manual entry
- Power linearity of less than 1%, excellent SWR of mismatch uncertainty, and highly accurate power repeatability
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST)
- SCPI codes compatible with 8480 series (option CFT)
Note: Option CFT is available to replace legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters.
- SCPI codes compatible with E-Series sensor (standard option)
- Compatible with EPM (N1913/14B, N1913/14A & E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A & N8262A) power meters
Note: All N8480 series power sensors are incompatible with the Keysight 43x, E1416A, 5314x microwave counters, and E7495x base station test sets.
Thermocouple Power Sensors
N8485A thermocouple power sensor, 10 MHz to 67 GHz, -35 to +20 dBm; drop-in replacement for 8480 Series sensors.
N8485A thermocouple power sensor, 10 MHz to 67 GHz, -35 to +20 dBm; drop-in replacement for 8480 Series sensors.
Thermocouple Power Sensors
N8485A
N8485A thermocouple power sensor, 10 MHz to 67 GHz, -35 to +20 dBm; drop-in replacement for 8480 Series sensors.
- Wide frequency range from 10 MHz to 26.5 GHz
- Wide dynamic range from -35 to +20 dBm
- EEPROM to store cal factors eliminates manual entry
- Power linearity of less than 1%, excellent SWR of mismatch uncertainty, and highly accurate power repeatability
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST)
- SCPI codes compatible with 8480 series (option CFT)
Note: Option CFT is available to replace legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters.
- SCPI codes compatible with E-Series sensor (standard option)
- Compatible with EPM (N1913/14B, N1913/14A & E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A & N8262A) power meters
Note: All N8480 series power sensors are incompatible with the Keysight 43x, E1416A, 5314x microwave counters, and E7495x base station test sets.
Thermocouple Power Sensors
N8481A thermocouple power sensor, 10 MHz to 18 GHz, -35 to +20 dBm; drop-in replacement for 8480 Series sensors.
N8481A thermocouple power sensor, 10 MHz to 18 GHz, -35 to +20 dBm; drop-in replacement for 8480 Series sensors.
Thermocouple Power Sensors
N8481A
N8481A thermocouple power sensor, 10 MHz to 18 GHz, -35 to +20 dBm; drop-in replacement for 8480 Series sensors.
- Wide frequency range from 10 MHz to 18 GHz
- Wide dynamic range from -35 to +20 dBm
- EEPROM to store cal factors eliminates manual entry
- Power linearity of less than 1%, excellent SWR of mismatch uncertainty, and highly accurate power repeatability
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST)
- SCPI codes compatible with 8480 series (option CFT)
Note: Option CFT is available to replace legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters.
- SCPI codes compatible with E-Series sensor (standard option)
- Compatible with EPM (N1913/14B, N1913/14A & E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A & N8262A) power meters
Note: All N8480 series power sensors are incompatible with the Keysight 43x, E1416A, 5314x microwave counters, and E7495x base station test sets.
E-Series Average Power Sensor
The E9304A power sensor measures average power over the frequency range 9 kHz to 6 GHz and power range -60 to +20 dBm. This sensor is ideal for very low frequency (VLF) power measurements.
The E9304A power sensor measures average power over the frequency range 9 kHz to 6 GHz and power range -60 to +20 dBm. This sensor is ideal for very low frequency (VLF) power measurements.
E-Series Average Power Sensor
E9304A
The E9304A power sensor measures average power over the frequency range 9 kHz to 6 GHz and power range -60 to +20 dBm. This sensor is ideal for very low frequency (VLF) power measurements.
- Low frequency coverage of 9 kHz to 6 GHz for EMC/EMI test applications such as the radiated immunity test (IEC61000-4-3)
- High sensitivity of -60 to +20 dBm and fast measurement speed to reduce the time taken to calibrate radiated field uniformity and EMC/EMI test receivers
- Measure transmitter power and receiver sensitivity at Very Low Frequency (VLF) to microwave frequencies
- Special option available for frequencies up to 18 GHz
- Compatible with EPM (N1913B/14B, N1913A/14A, E4418B/19B), EPM-P (E4416A/17A) and P-series (N1911A/12A) power meters
E-Series Average Power Sensor
The E9301B power sensor measures average power over the frequency range 10 MHz to 6 GHz and power range -30 to +44 dBm (74 dB dynamic range).
The E9301B power sensor measures average power over the frequency range 10 MHz to 6 GHz and power range -30 to +44 dBm (74 dB dynamic range).
E-Series Average Power Sensor
E9301B
The E9301B power sensor measures average power over the frequency range 10 MHz to 6 GHz and power range -30 to +44 dBm (74 dB dynamic range).
- Frequency range of 10 MHz to 6 GHz coverage for Wireless Comms formats
- Wide dynamic range power measurements from -30 to +44 dBm
- Measure the average power of all modulation formats
- Low SWR for reducing mismatch uncertainty
- Calibration factors, linearity, and temperature compensation data are stored in EEPROM
- Compatible with EPM (N1913B/14B, N1913A/14A, E4418B/19B), EPM-P (E4416A/17A) and P-series (N1911A/12A) power meters
Thermocouple Power Sensors
N8488A power sensor has the widest frequency range among N8480 power sensors offering from Keysight.
N8488A power sensor has the widest frequency range among N8480 power sensors offering from Keysight.
Thermocouple Power Sensors
N8488A
N8488A power sensor has the widest frequency range among N8480 power sensors offering from Keysight.
- Wide frequency range from 10 MHz to 67 GHz (Not warranted spec from 67 to 70 GHz)
- Wide dynamic range from -35 to +20 dBm
- EEPROM to store cal factors eliminates manual entry
- Power linearity of less than 1%, excellent SWR of mismatch uncertainty, and highly accurate power repeatability
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST)
- SCPI codes compatibility
- Compatible with EPM (N1913/14B, N1913/14A & E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A & N8262A) power meters
Thermocouple Power Sensors
N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors.
N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors.
Thermocouple Power Sensors
N8481H
N8480 Series Power Sensors are the replacement solutions for 8480 Series Power Sensors.
- Wide frequency range from 10 MHz to 18 GHz
- Wide dynamic range from -15 to +35 dBm
- EEPROM to store cal factors eliminates manual entry
- Power linearity of less than 1%, excellent SWR of mismatch uncertainty, and highly accurate power repeatability
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST)
- SCPI codes compatible with 8480 series (option CFT)
Note: Option CFT is available to replace legacy 8480 Series power sensors intended for cal factor manual entry and SCPI compatibility. Option CFT is not compatible with 43x and other obsolete power meters.
- SCPI codes compatible with E-Series sensor (standard option)
- Compatible with EPM (N1913/14B, N1913/14A & E4418/19B), EPM-P (E4416/17A), P-Series (N1911/12A & N8262A) power meters
Note: All N8480 series power sensors are incompatible with the Keysight 43x, E1416A, 5314x microwave counters, and E7495x base station test sets.
Waveguide Power Sensor
Designed with a WR-12 flange connector, the E8486A makes precise and direct waveguide measurements in the E-band frequency range and is compatible with most Keysight power meters.
Designed with a WR-12 flange connector, the E8486A makes precise and direct waveguide measurements in the E-band frequency range and is compatible with most Keysight power meters.
Waveguide Power Sensor
E8486A
Designed with a WR-12 flange connector, the E8486A makes precise and direct waveguide measurements in the E-band frequency range and is compatible with most Keysight power meters.
- Frequency range 60 to 90 GHz
- Accurate average power measurements over -30 to +20 dBm
- Excellent SWR for reducing mismatch uncertainty
- Diode power sensing element
- 50 MHz calibration port
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST) millimeter-wave sensor calibration
- Compatible with EPM (N1913/14B), EPM-P (E4416/17A) and P-Series (N1911/12A) power meters, plus the discontinued N1913/14A and E4418/19B power meters
Note: The E8486A option 200/201 is not compatible with EPM E4418/19B power meters.
Waveguide Power Sensor
The W8486A waveguide power sensor measures average power over the frequency range 75 GHz to 110 GHz and power range -30 to +20 dBm.
The W8486A waveguide power sensor measures average power over the frequency range 75 GHz to 110 GHz and power range -30 to +20 dBm.
Waveguide Power Sensor
W8486A
The W8486A waveguide power sensor measures average power over the frequency range 75 GHz to 110 GHz and power range -30 to +20 dBm.
- Frequency range 75 to 110 GHz
- Accurate average power measurements over -30 to +20 dBm
- Excellent SWR for reducing mismatch uncertainty
- Diode power sensing element
- 50 MHz calibration port
- Accurate calibration and traceability to the US National Institute of Standards and Technology (NIST) millimeter-wave sensor calibration
- Compatible with EPM (N1913/14B), EPM-P (E4416/17A) and P-Series (N1911/12A) power meters, plus the discontinued N1913/14A, E441xA/B, 43xA/B, E1416A VXI and 70100A power meters
