Choose a country or area to see content specific to your location
Measuring 5G channel sounding requires assessing the characteristics of the radio channel to optimize wireless communication. The wideband correlation technique represents the best approach to performing channel sounding as it measures the entire bandwidth, simultaneously enabling faster access to channel impulse response (CIR) data. The technique involves creating a mathematical model as well as capturing and analyzing the correlation of signals received at multiple antennas. Analyzing the signals enables the spatial property characterization of the wireless channel, such as the angle of arrival (AoA), angle of departure (AoD), and other spatial information.
To perform 5G channel sounding measurements, engineers need a solution that uses wideband correlation as the baseband-sounding technique. The solution must include a wideband signal generator with a wideband arbitrary waveform generator (AWG) and millimeter-wave (mmWave) vector signal generator (VSG). The AWG provides the in-phase and quadrature (I/Q) signals that modulate the output of the VSG, and the mmWave switch routes the VSG output to the transmit antennas in sequence. On the receiver side, a multichannel downconverter translates the received signals into the intermediate frequency (IF) bandwidth of the multichannel digitizer.
How to Perform 5G Channel Sounding Measurements
Perform basic signal analysis with hardware connectivity
Activity |
|
Hardware Connectivity |
|
Technology |
|
Signal Analysis Industries and Options |
|
How to Perform 5G Channel Sounding Measurements
80W Triple Output Power Supply, 6V, 5A & ±25V, 1A
Maximum Voltage Per Output | ±25 V |
Maximum Current per Output | 5 A |
Maximum Power | 80 W |
Number of Outputs | 3 |
Type |
|
How to Perform 5G Channel Sounding Measurements
N5183B MXG X-Series microwave analog signal generator offers 9 kHz to 40 GHz frequency coverage and near PSG levels of phase noise performance with advantages in size and speed.
Frequency | 9 kHz to 40 GHz |
Output Power @1 GHz | +23 dBm |
Frequency Switching (Typical) | 600 µs |
Harmonics @1 GHz | -33 dBc |
Phase Noise @1 GHz (20 kHz offset) | -146 dBc/Hz (10 kHz offset) |
Type |
|
How to Perform 5G Channel Sounding Measurements
Integrated high-performance microwave vector signal generator covers frequencies from 100 kHz to 44 GHz (extendable to 500 GHz) for design and manufacturing in aerospace defense, satellite communications, and broadband wireless.
Frequency | 100 kHz to 44 GHz |
Output Power @1 GHz | +21 dBm |
Frequency Switching (Typical) | 16 ms |
Harmonics @1 GHz | -55 dBc |
Phase Noise @1 GHz (20 kHz offset) | -143 dBc/Hz (10 kHz offset) |
Type |
|
How to Perform 5G Channel Sounding Measurements
Keysight's M8190A — A Keysight AWG is the source of greater fidelity, delivering high resolution and wide bandwidth — simultaneously
Number of Outputs | 1 or 2, Differential and single ended |
Key Attributes | Arbitrary Waveform Generator 14 bit / 8 GSa/s 12 bit / 12 GSa/s 128 MSa memory Upgrade to 2 GSa memory Advanced sequencing |
Amplitude | 2,000 mVpp diff max |
Data Capabilities | |
Frequency Range |
|
Signal Type |
|
How to Perform 5G Channel Sounding Measurements
Waveform Generator, 20 MHz, 1-Channel, with Arb
Type |
|
Form Factor |
|
Number of Channels |
|
Frequency Range |
|
Max Sample Rate | 160 Msa/s |
How to Perform 5G Channel Sounding Measurements
A single platform to architect, design, and verify complex RF systems
Product Categories System Design |
|
ESL System Design |
|
Additional resources for Channel Sounding Measurements
Testing GNSS receiver sensitivity requires accurate and repeatable signals that simulate satellites in GPS, GLONASS, Galileo, or Beidou constellations. Learn how to leverage Keysight software to test a receiver’s ability to detect, receiver sensitivity, Time To First Fix (TTFF), and static location accuracy.
Learn more
Testing an antenna-in-package (AiP) design at mmWave frequencies requires a test solution with high output power, ultra-low phase noise, wide analysis bandwidth, and high dynamic range. Learn how to set up a test to characterize an AiP design with high dynamic range and accurate error vector magnitude (EVM) performance.
Learn more
NTN test requires laboratory reconstruction of all possible NTN scenario permutations. Learn how to perform end-to-end testing and validation of NTN deployments.
Learn more
Need help finding the right solution for you?