How to Verify Wi-Fi 6E/7 Devices

+ Wireless Test Set

Validate Wi-Fi 6E/7 Manufacturing Test

Verifying Wi-Fi 6E and 801.11be (Wi-Fi 7) devices in manufacturing requires repeatable radio frequency (RF) measurements across the configured bands, channels, bandwidths, and device paths. Engineers need to test wireless local area network performance in the 6 GHz band while maintaining sufficient bandwidth, port coverage, and measurement consistency for high-volume production. Measurements may include transmit power, modulation quality, error vector magnitude (EVM), spectral behavior, receiver response, and pass/fail limits across the required device configurations.

The test setup connects the Wi-Fi device under test to a wireless test set and executes automated transmit and receive measurements across selected radio paths. A scalable manufacturing setup helps reduce idle time between tests while preserving measurement coverage for Wi-Fi 6E/7 requirements. This supports production validation where engineers need repeatable RF results, efficient test sequencing, and enough signal bandwidth for wideband wireless device test.

Wi-Fi 6E/7 Device Test Solution

Verify Wi-Fi 6E/7 devices in manufacturing by automating radio frequency transmit and receive measurements across the required bands, bandwidths, channels, and device configurations. The solution uses a Keysight Wireless Test Set to support Wi-Fi 6E/7 production test with wideband signal analysis, scalable RF coverage, and automated measurement execution. Engineers can validate channel power, spectrum emission mask, spurious emission, frequency error, EVM, and pass/fail limits while supporting manufacturing throughput goals. This enables repeatable wireless local area network device verification for Wi-Fi 6E/7 and next-generation wireless configurations.

Get Quote