Modular Systems

Route Multiple Channels to a Single Point

The M9101A, a high-density, 64-channel PXI multiplexer routes many different channels to a single point. The switches operate in a break-before-make mode that ensures no two points are connected at the same time or, if needed multiple channels can connect simultaneously. Ideal for routing multiple analog signals to a measurement device in automated test environment (ATE) or data acquisition systems. Each channel switches a high and a low for 2-wire switching up to 100Vrms, with up to 10W of power. Connection options include the durable connector block or the standard cable connections.

Application

• Switch many different points to a single instrument for data acquisition and automated test applications

Performance characteristics

• High-speed 500 usec reed relays
• Break-before-make or simultaneous switch closures

Functionality

• 64-channel, high-density 2-wire switch multiplexer
• 100Vrms
• 0.5A/1.0A switch/carry current
• 10W max power
• Software drivers: Visual Studio^®, C, C++, C#, Visual Basic, MATLAB^® and LabVIEW™

Application-focused specs

• 0.03 dB insertion loss repeatability guaranteed throughout the 5 million cycle operating life ensures accuracy of your test results
• Unmatched isolation 92 dB at 8 GHz minimizes cross talk in high density ATE systems
• Broadband from DC to 26.5 GHz fits most communication and aerospace/defense applications

Functionality

• Route RF and microwave signals in automated test applications
• Flexibility to build switch matrix as desired, hence a low cost solution
• Peace of mind in switch technology from Keysight who has a proven record for providing versatile, quality switches

Performance characteristics

• Exceptional 0.03 dB insertion loss repeatability
• Long life cycles - 5 million cycles guaranteed, 10 million cycles typical
• Unmatched isolation and low SWR

The Keysight M9155C is a dual SPDT PXI hybrid switch module, which integrates two Keysight 8765C coaxial switches. It is a 1 slot wide size module.

The M9155C operates from DC to 26.5 GHz, providing a low-cost switching solution for measurement and automation of Automatic Test Equipment (ATE) systems without compromising RF performance. It is used in applications such as ATE, RF communication and RF parametric measurements where a rugged switching module is needed for signal routing. Typical switching applications for SPDT coaxial switches include signal routing of a single input to dual instruments.

The M9155C provides an exceptional 0.03 dB insertion loss repeatability throughout a 5 million life cycle, unmatched isolation required to maintain signal integrity, and a low SWR that minimizes measurement uncertainty.

• Superior 0.03 dB insertion loss repeatability through the operating life of up to five million cycles.
• Broad attenuation range of 0 to 101 dB, with 1 dB step.
• High attenuation accuracy and flatness of +0.4 dB at 26.5 GHz.

The M9168C PXI programmable step attenuator module operates from DC to 26.5 GHz with a guaranteed 0.03 dB insertion loss repeatability for each section throughout the five million cycles operating life. Superior attenuation accuracy across a wide operating temperature range ensures precise measurements using a PXI hybrid platform. The M9168C PXI programmable step attenuator module enhances the measurement accuracy and flexibility of PXI-based RF and microwave test systems.

Applications

• RF signal path attenuation simulation
• engineering verification
• RF receiver sensitivity test
• adjacent channel interference

Functionality

• accurate control of RF power levels

RF performance

• guaranteed 0.03 dB insertion loss repeatability throughout the operating life of up to five million cycles per section
• broad attenuation range of 0 to 101 dB with 1 dB, 5 dB, and 10 dB step
• high attenuation accuracy with flatness of ± 0.4 dB at 26.5 GHz

Applications-focused specs

• 0.03 dB insertion loss repeatability guaranteed throughout the 2 million cycle operating life, ensures accuracy of your test results.
• Unmatched isolation 90 dB at 12 GHz minimizes cross talk in high density ATE systems.
• Broadband from DC to 26.5 GHz fits most communication and aerospace/defense applications.

Functionality

• Route RF and microwave signals in automated test applications.
• Flexibility to build switch matrix as desired, hence a low cost solution.
• Peace of mind in switch technology from Keysight who has a proven record for providing versatile, quality switches.

Performance characteristics

• Exceptional 0.03 dB insertion loss repeatability.
• Long life cycles - 2 million cycles guaranteed, 5 million cycles typical.
• Unmatched isolation and low SWR.

Keysight M9157C is a single SP6T PXI hybrid switch module, which integrates one Keysight L7106C multiport coaxial switch. It is a 3 slot wide size module.

M9157C operates from DC to 26.5 GHz, providing a low-cost operation switching solution for measurement and automation of Automatic Test Equipment (ATE) systems without compromise in the RF performance. It is being used in applications such as ATE, RF communication and RF parametric measurements where a rugged switching module is needed for signal routing. Typical switching applications for multiport coaxial switches include signal routing to a single input to multiple instruments and routing of multiple input signals.

The M9157C provides an exceptional 0.03 dB insertion loss repeatability throughout 2 million life cycle, unmatched isolation required to maintain signal integrity, with a low SWR that minimizes measurement uncertainty.

Application-focused specs

• 0.03 dB insertion loss repeatability guaranteed throughout the 2 million cycle operating life ensures accuracy of your test results
• Unmatched isolation 94 dB at 8 GHz minimizes cross talk in high density ATE systems
• Broadband from DC to 26.5 GHz fits most communication and aerospace/defense applications

Functionality

• Route RF and microwave signals in automated test applications
• Flexibility to build switch matrix as desired, hence a low cost solution
• Peace of mind in switch technology from Keysight who has a proven record for providing versatile, quality switches

Performance characteristics

• Exceptional 0.03 dB insertion loss repeatability
• Long life cycles - 2 million cycles guaranteed, 5 million cycles typical
• Unmatched isolation and low SWR

Keysight M9156C is a dual Transfer PXI hybrid switch module, which integrates two Keysight L7222C coaxial transfer switches. It is a 2 slot wide size module.

M9156C operates from DC to 26.5 GHz, providing a low-cost operation switching solution for measurement and automation of Automatic Test Equipment (ATE) systems without compromise in the RF performance. It is being used in applications such as ATE, RF communications measurement and RF parametric measurements where a rugged switching module is needed for signal routing. Keysight M9156C transfer switches can be used in many different applications to increase system flexibility and simplify system design. For example, switch between two inputs and two outputs, or bypass an active device.

The M9156C provides an exceptional 0.03 dB insertion loss repeatability throughout 2 million life cycle, unmatched isolation required to maintain signal integrity, with a low SWR that minimizes measurement uncertainty.

Applications

• general-purpose switching to control external devices or switching in light loads or power supplies

Functionality

• 100-channel single-pole, single-throw (SPST) switch
• 100 Vrms
• 1 A switch / carry current
• 25 W max power

Performance characteristics

• high-speed 350 ms switch closures

The M9133A is a high-density, general-purpose switch with 100 independent, single-pole, single-throw (Form A) switches in a single PXI module. This module can be used to cycle power to products under test, control indicator and status lights, or actuate external power relays and solenoids. The high-speed, long-life reed relays can handle 100 Vrms and 1 A, with up to 25 W power. Choose from the durable connector block or the standard cable connections.

Software drivers support most common programming environments such as Visual Studio, C, C++, C#, Visual Basic, MATLAB^, and LabVIEW. The high-quality switches ensure trustworthy measurements, and the high-speed relays increase test throughput. Installation and configuration are fast and easy using Keysight Connection Expert and soft front panels.

Applications

• general-purpose switching to control external devices or switching in light loads or power supplies

Functionality

• 64-channel single-pole, double-throw (SPDT) switch
• 100 Vrms
• 1 A switch / carry current
• 3 W max power

The M9131A is a high-density, general-purpose switch with 64 independent, single-pole, double-throw (Form C) switches in a single PXI module. This module can be used to cycle power to products under test, control indicator and status lights, or actuate external power relays and solenoids. The high-speed, long-life reed relays can handle 100 Vrms and 1 A, with up to 3 W maximum power. Choose from the durable connector block or standard cable connections.

Software drivers support most common programming environments such as Visual Studio, C, C++, C#, Visual Basic, MATLAB and LabVIEW. The high-quality switches with durable connections ensure trustworthy measurements, and high-speed reed relays help to increase test throughput. Installation and configuration are fast and easy using Keysight Connection Expert and soft front panels.

Applications

• general-purpose switching to control external devices or switching in light loads or power supplies

Functionality

• 50-channel single-pole, single-throw (SPST) switch
• 100 Vrms
• 1 A switch / carry current
• 25 W max power

Performance characteristics

• High-speed 350 ms switch closures

The M9132A is a high-density, general-purpose switch with 50 independent, single-pole, single-throw (Form A) switches in a single PXI module. This module can be used to cycle power to products under test, control indicator and status lights, or actuate external power relays and solenoids. The high-speed, long-life reed relays can handle 100 Vrms and 1 A, with up to 25 W power. Choose from the durable connector block or standard cable connections.

Software drivers support most common programming environments such as Visual Studio, C, C++, C#, Visual Basic, MATLAB and LabVIEW. The high-quality switches with high-speed reed relays ensure trustworthy measurements and increased test throughput. Installation and configuration are fast and easy with Keysight Connection Expert and soft front panels.

26 Independent, Single-pole, Double-throw Switches in a Single PXI Module

The M9130A provides 26 independent, single-pole, double-throw (Form C) switches in a single PXI module. Use this switch to cycle power to your device under test or actuate external power relays and solenoids. The armature relays handle up to 60W power and 6A pulsed carry current. Choose from the durable connector block or standard cable connections.

• General purpose switching to control external devices or switch in loads or power supplies
• 26-channel SPDT switch
• 2A switch/carry current
• 60W max power

• Durable, armature relays
• 2A carry current
• Software drivers: Visual Studio, C, C++, C#, Visual Basic, MATLAB, and LabVIEW

Functionality

• 20-channel single-pole, single-throw (SPST) switch
• 250 Vrms / 125 Vrms
• 5 A switch current and carry current
• 300 W max power

Performance characteristics

• durable, latching armature relays

The M9135A is a general-purpose switch with 20 independent, single-pole, single-throw (Form A) switches in a single PXI module. This module is ideal for switching heavy loads or power supplies including voltages mains or DC current. The heavy-duty armature relays are rated for up to 5 A and 300 W, enough for inductive or capacitive loads. Choose from the heavy-duty power connector or an unterminated power cable.

Software drivers support most common programming environments such as Visual Studio, C, C++, C#, Visual Basic, MATLAB, and LabVIEW. The high-quality power switches with durable connections ensure trustworthy measurements. Installation and configuration are fast and easy with Keysight Connection Expert and soft front panels.

Route Multiple Channels to a Single Point

The M9102A, a high-density, 128-channel multiplexer routes many different channels to a single point. The switches operate in a break-before-make mode that ensures no two points are connected at the same time. This 1-wire multiplexer features high speed, long-life reed relays capable of switching up to 100Vrms, with up to 10W of power. Connection options include the durable connector block or the standard cable connections.

Application

• Switch many different points to a single instrument for data acquisition and automated test applications

Performance characteristics

• High-speed 500 usec reed relays
• Break-before-make or simultaneous switch closures

Functionality

• 128-channel, high-density 1-wire switch multiplexer
• 100Vrms
• 0.5A/1.0A switch/carry current
• 10W max power
• Software drivers: Visual Studio, C, C++, C#, Visual Basic, MATLAB, and LabVIEW

Application-focused specifications  

• 0.03 dB insertion loss repeatability guaranteed throughout the 5 million cycle operating life, ensures accuracy of your test results
• Unmatched isolation 65 dB at 40 GHz minimizes cross talk in high density ATE systems
• Broadband from DC to 40 GHz fits most communication and aerospace/defense applications 

Functionality 

• Route RF and microwave signals in automated test applications
• Flexibility to build switch matrix as desired, hence a low-cost-per-cycle solution with high RF performance
• Peace-of-mind in switch technology from Keysight who has a proven record for providing versatile, quality switches

Performance characteristics 

• Exceptional 0.03 dB insertion loss repeatability
• Long life cycles of 5 million cycles guaranteed, 10 million cycles typical
• Unmatched isolation and low SWR

Keysight M9157CH40 is a single SP6T PXI hybrid switch module, which integrates one Keysight 87106D multiport coaxial switch. It is a 3 slot wide size module.

M9157CH40 operates from DC to 40 GHz, providing a low-cost operation switching solution for measurement and automation of Automatic Test Equipment (ATE) systems without compromise in the RF performance. It is being used in applications such as ATE, RF communication and RF parametric measurements where a rugged switching module is needed for signal routing. Typical switching applications for multiport coaxial switches include signal routing to a single input - to multiple instruments and routing of multiple input signals.

The M9157CH40 provides an exceptional 0.03 dB insertion loss repeatability throughout 5 million life cycle, unmatched isolation required to maintain signal integrity, with a low SWR that minimizes measurement uncertainty.