N7820A PSG Series Calibration Application

Keysight empfiehlt die Verwendung der aktuellen Version, die die neuesten verfügbaren Fehlerbehebungen und Sicherheitspatches enthält.
Veröffentlichungsdatum Version Versionsbeschreibung
2026-07-08 E.19.00 Added the following ETE support for all applicable PSG-D adjustments. - N9030A and N9030B Signal Analyzer - 33622A, 33611A, 33612A, and 33621A Function Generator - N1000A Oscilloscope Mainframe - N1045B, N1045A, and N1055A Oscilloscope Plug-in - N1914B power meter o Added the N1914B power meter as an alternative for all applicable performance verification tests. o Added the 89600 VSA connectivity options 89601201C and 89601202C as an alternative for Internal EVM Digital Modulation Quality. o Defects Fixed: - Added USB IO support for DSOS104A Oscilloscope. - Corrected the modulation rate listed in External Phase Modulation Frequency Response Test. - Fixed an issue where the Optimize Signal Noise Mode column is not showing up in Single-Sideband Phase Noise test for the E8257D option HY2. - Fixed an uncertainty issue for Maximum Output Power - Digital Mode. - Added the 10 dB attenuator model check for Internal Pulse Modulation Level Accuracy Test. - Fixed an issue that caused the Internal EVM Digital Modulation Quality timeout issues when using the N9030B Spectrum Analyzer with firmware A.39.20 or above.
Veröffentlichungsdatum Version
2026-07-08 E.19.00
Version Description
Added the following ETE support for all applicable PSG-D adjustments. - N9030A and N9030B Signal Analyzer - 33622A, 33611A, 33612A, and 33621A Function Generator - N1000A Oscilloscope Mainframe - N1045B, N1045A, and N1055A Oscilloscope Plug-in - N1914B power meter o Added the N1914B power meter as an alternative for all applicable performance verification tests. o Added the 89600 VSA connectivity options 89601201C and 89601202C as an alternative for Internal EVM Digital Modulation Quality. o Defects Fixed: - Added USB IO support for DSOS104A Oscilloscope. - Corrected the modulation rate listed in External Phase Modulation Frequency Response Test. - Fixed an issue where the Optimize Signal Noise Mode column is not showing up in Single-Sideband Phase Noise test for the E8257D option HY2. - Fixed an uncertainty issue for Maximum Output Power - Digital Mode. - Added the 10 dB attenuator model check for Internal Pulse Modulation Level Accuracy Test. - Fixed an issue that caused the Internal EVM Digital Modulation Quality timeout issues when using the N9030B Spectrum Analyzer with firmware A.39.20 or above.

Wie geht das Herunterladen

  • Close all applications.
  • Download application .exe file to the PC desktop.

How to Install

  1. Download the Setup.exe file to the PC desktop.
  2. Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
  3. Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

Lizenzierung

  • Requires a License
    To obtain a key contact your local Keysight Technologies Sales Representative.

Dokumentation

Download

Installs on: PC

Betriebssystem

  • Windows 10/11

Minimum Requirements to Run TME N78xxA Application Software:
 

  • TME revision E.04.09 or higher
  • Check individual N78xxA Application’s ReadMe files for specific requirements

Voraussetzungen

Supported Instruments

  • E8663D, E8257D, E8267D, E8257N

Wie geht das Herunterladen

  • Close all applications.
  • Download application .exe file to the PC desktop.

How to Install

  1. Download the Setup.exe file to the PC desktop.
  2. Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
  3. Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

Lizenzierung

  • Requires a License
    To obtain a key contact your local Keysight Technologies Sales Representative.

Dokumentation

Download

Installs on: PC

Betriebssystem

  • Windows 10

Minimum Requirements to Run TME N78xxA Application Software:
 

  • TME revision E.03.91 or higher
  • Check individual N78xxA Application’s ReadMe files for specific requirements

Voraussetzungen

Supported Instruments

  • E8663D, E8257D, E8267D, E8257N

Wie geht das Herunterladen

  • Close all applications.
  • Download application .exe file to the PC desktop.

How to Install

  1. Download the Setup.exe file to the PC desktop.
  2. Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
  3. Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

Lizenzierung

  • Requires a License
    To obtain a key contact your local Keysight Technologies Sales Representative.

Dokumentation

Download

Installs on: PC

Betriebssystem

  • Windows 10

Minimum Requirements to Run TME N78xxA Application Software:
 

  • TME revision E.03.91 or higher
  • Check individual N78xxA Application’s ReadMe files for specific requirements

Voraussetzungen

Supported Instruments

  • E8663D, E8257D, E8267D, E8257N

Wie geht das Herunterladen

  • Close all applications.
  • Download application .exe file to the PC desktop.

How to Install

  1. Download the Setup.exe file to the PC desktop.
  2. Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
  3. Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

Lizenzierung

  • Requires a License
    To obtain a key contact your local Keysight Technologies Sales Representative.

Dokumentation

Download

Installs on: PC

Betriebssystem

  • Windows 10

Minimum Requirements to Run TME N78xxA Application Software:
 

  • TME revision E.03.91 or higher
  • Check individual N78xxA Application’s ReadMe files for specific requirements

Voraussetzungen

Supported Instruments

  • E8663D, E8257D, E8267D, E8257N

Wie geht das Herunterladen

  • Close all applications.
  • Download application .exe file to the PC desktop.

How to Install

  1. Download the Setup.exe file to the PC desktop.
  2. Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
  3. Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

Lizenzierung

  • Requires a License
    To obtain a key contact your local Keysight Technologies Sales Representative.

Dokumentation

Download

Installs on: PC

Betriebssystem

  • Windows 10

Minimum Requirements to Run TME N78xxA Application Software:
 

  • TME revision E.03.91 or higher
  • Check individual N78xxA Application’s ReadMe files for specific requirements

Voraussetzungen

Supported Instruments

  • E8663D, E8257D, E8267D, E8257N

Wie geht das Herunterladen

  • Close all applications.
  • Download application .exe file to the PC desktop.

How to Install

  1. Download the Setup.exe file to the PC desktop.
  2. Run Setup.exe as follows: Right-click the Setup.exe file and select “Run as Administrator” to start the installation.
  3. Follow the instructions on the screen to install the Test Management Environment.
Important Note: After the initial N7800A TME installation, be sure to launch the application in Normal mode. Do not launch in Administrator mode. Administrator mode is only used for the initial installation of the N7800A TME application.

Lizenzierung

  • Requires a License
    To obtain a key contact your local Keysight Technologies Sales Representative.

Dokumentation

Download

Installs on: PC

Betriebssystem

  • Windows 10

Minimum Requirements to Run TME N78xxA Application Software:
 

  • TME revision E.03.91 or higher
  • Check individual N78xxA Application’s ReadMe files for specific requirements

Voraussetzungen

Supported Instruments

  • E8663D, E8257D, E8267D, E8257N
SHOW MORE