Vectorless Test Solutions – VTEP, FrameScan FX and TestJet Enhanced

This white paper provides an analysis of performance differences between Keysight VTEP, FrameScan FX and TestJet Enhanced technologies.

Programming Micron P8P Parallel PCM Flash using Serial Peripheral Interface (SPI) on Medalist i3070 In-Circuit Tester -

The Micron Omneo P8P phase change memory has a new serial peripheral interface to enable low cost, low pin count on-board programming using the Keysight Medalist i3070 in-circuit test solution.

Establishing Traceability for Quantities Derived from Multiple Traceable Quantities

Provides method of developing traceability for measurements (eg. phase noise) that have no SI units.

Modeling a Ring Resonator

Explore ring resonator modeling using the FullWAVE FDTD simulation tool to analyze resonances and optical filtering behavior.

Silicon Nanowire Polarization Rotator

This RSoft product application note illustrates an ultra-small passive polarization rotator that is simple to fabricate and operate.

Simulation of Long-Period Fiber Gratings Formed with Helical Fiber

RSoft's BeamPROP simulation tool is ideal for designing helical fibers.

Photonic Bandgap (PBG) Waveguide Modes

See a general guide to calculating projected band structures of PBG structures and defect modes.

LF Noise Measurement Before and After Stress Biasing with E4727B

Application of the low-frequency noise measurement system (Keysight E4727B) for the stress biasing and aging test.

Top CMMC Compliance Barriers

Achieving CMMC compliance is as much an operational challenge as a technical one. This solution brief summarizes Keysight’s commissioned primary research on what is slowing CMMC progress across the Defense Industrial Base (DIB). The study highlights a consistent set of barriers cited by cybersecurity, IT, and compliance leaders — factors that increase cost, extend timelines, and create risk as CMMC requirements move toward broader enforcement.

How Virtual Prototyping Accelerates Vehicle Development

Sustainability is reshaping automotive development. This whitepaper explores how Keysight CAE enables automakers to achieve “Mission Zero” through 100% Virtual Prototyping—reducing physical tests, emissions, time, and cost while improving safety, agility, and human-centered design in a fully digital vehicle lifecycle.

Why Test Automation Pass Rates Create False Confidence

This technical perspective explores why automated test pass rates can create false confidence in Aerospace & Defense programs. It examines where risk hides in complex, distributed systems, how integration seams and state transitions go untested, and why late discovery undermines release confidence in safety-critical environments.

The Wi-Fi 6E Challenge in Regulatory Test

This application note explains the evolution of Wireless Standard Wi-Fi 6E in Regulatory test.

Sequential Measurement Function for Fast Test Sequencing

Learn how sequential measurement functions work and how to execute a fast test sequence without having to program using the Keysight B2985A/87A.

How Auto-Parallel Capability Extends the Range of Bench Power Supply

Learn how to enable auto-parallel power supplies in 2 easy steps using the auto-parallel mode of the E36300 to provide a higher output current power supply.

Electromagnetic Compatibility (EMC) Pre-Compliance Testing Solution

EMC Pre-compliance Testing Solution

Keysight Solution for Power Storage and Conversion Testing

There is a growing need to test power across all industries such as IoT, medical, automotive, and industrial. Properly powering up a test device is critical to evaluating a design. At the same time, properly loading down a test device is just as important. Things like DC-DC converters and batteries require both a power source and a loading mechanism to perform various tests. While both common solutions involve the power source and the load as separate instruments, Keysight has you covered with a fully integrated source and load solution. The N6700 power platform allows the test engineer to power up and load down a device properly in a single sweep with seamless interaction between the two operations.

Multi-Instrument Synchronization with the 81180A

For applications that require more than two channels, a built-in synchronization feature allows for synchronizing two 81180A arbitrary waveform generators to create a fully synchronized 4-channel system.

How Eggplant Digital Automation Intelligence (DAI) Runner Optimizes DevOps

The Digital Automation Intelligence (DAI) runner is an executable, or command-line tool, from Eggplant that allows you to trigger Eggplant DAI tests remotely through the DAI API. The DAI runner is available for the Mac, Windows, and Linux (CentOS and Ubuntu) operating systems.

How to Achieve Optimum Power Measurement Speed and Accuracy

Learn three keys to improve power measurement speeds, power measurement accuracy by using the right power meters and power sensors.

Improving Power Supply Efficiency – 5 Hints

This paper explains 5 easy ways to improve power supply throughput, improve efficiency, and provide the highest level of protection to your test device.