How to Measure RF Phase Noise

Get Quote
Signal Analyzer
+ Signal Analyzer
Signal Analyzer
+ Signal Analyzer

Optimizing RF Phase Noise Through Advanced Measurement Methods

Measuring phase noise is essential to optimizing narrow channel communications in RF transmissions. The instability of the oscillator causes phase noise, which appears as jitter in the time domain. Phase noise impacts the signal quality and increases error rates in communications links. Unlike other signal noise, phase noise is best understood in the spectral domain.

There are three common techniques for measuring phase noise: direct spectrum, phase detector, and two-channel cross-correlation. The direct spectrum technique measures the spectral energy of the broadband signal using an instrument like a spectrum / signal analyzer, but there are limitations due to the amplitude noise mimicking phase noise. Advanced applications use a dedicated phase noise instrument that employs a phase detector and two-channel cross-correlation techniques. Both techniques operate on the baseband signal and require a downconverter.

RF Phase Noise Measurement Solution

Measuring RF and microwave frequency phase noise requires a dedicated phase noise instrument. The Keysight RF phase noise measurement solution uses the Keysight N5511A phase noise test system, the Keysight E5055A SSA-X signal source and the Keysight E5053A microwave downconverter to deliver accurate phase noise measurements with an ultra-low noise floor. Both absolute and residual phase noise can be measured down to kT (-177 dBm/Hz).
Get Quote

See Demo on How You Can Accurately Measure RF Phase Noise

Explore Products in Our RF Phase Noise Measurement Solution

Related Use Cases

How to Maximize Power Amplifier Efficiency and Linearity

Maximizing power amplifier (PA) linearity, while maintaining efficiency, requires a linearization technique called digital pre-distortion (DPD). To provide optimal performance, the DPD technique needs wideband, calibrated vector signal generation and signal analysis.

Learn More

How to Verify Frequency Mixer Performance

Verifying your frequency mixer performance while ensuring 5G New Radio standard conformance requires a comprehensive test setup. Learn how to conduct fully vector-corrected noise figure, modulation distortion analysis, and vector and scalar mixer measurements up to 44 GHz using a network analyzer.

Learn More

How to Test a 5G NR NTN-Enabled Device

Testing a 5G NR NTN-enabled device requires validating the handset’s ability to stream data, utilize emergency SMS, and perform other functions utilizing NTN communications. Learn how to test a 5G NR NTN-enabled device with a comprehensive emulation test solution.

Learn More

contact us logo

Get in Touch With One of Our Experts

Need Help Finding the Right Solution for You?

Contact Us