Keysight M9703B-SR2
1.6 GS/s
CNY 422,824.50
原价 CNY 1,409,415.00

是德科技原厂二手仪器
Keysight M9703B-SR2 CNY 422,824.50
从
CNY 422,824.50 节省 70%
| SR2 | MAXIMUM SAMPLING RATE, 1.6 GS/S PER CHANNEL | Installed |
| DGT | DIGITIZER FIRMWARE | Installed |
| F10 | FULL BANDWIDTH ENABLED | Installed |
| INT | INTERLEAVED SAMPLING ENABLED | Installed |
| LX2 | DIGITAL PROCESSING UNIT FPGA LX195 | Installed |
| M16 | MEMORY, 16GB, 1024 MSAMPLES/CH | Installed |
您可以通过索取报价的方式咨询该仪器是否可以定制
安心体验,基于是德科技的专业保障:KeysightCare Assured 服务+ 原厂校准服务
|
Fresh Calibration* 交付周期延长约4周 | CNY 10,455.00 |
*若仪器尚未校准(详见商品详情),需先完成校准方可购买 KeysightCare 计划。
Fast and Versatile AXIe Wideband Digital Receiver
The Keysight M9703B, a DC-coupled 12-bit wideband digital receiver/digitizer, is based on the AXIe standard and offers 8 acquisition channels in a single-slot card. It provides excellent channel density and flexible scalability and is ideal for multichannel applications in advanced physics, aerospace & defense, and RF communications.
Functionality
- 8 channels, 12-bit resolution, up to 3.2 GS/s, DC to 2 GHz input frequency range, up to 16 GB on-board memory
- Multi-module processing synchronization for up to 64 phase coherent channels
- On-board FPGAs with or without streaming and recording, suitable for custom processing or off-the-shelf wideband real-time DDC
- Enhanced signal processing configuration for OEM and A&D applications, large FPGA with customizable numerous real-time I/O interfaces
Applications
- Multi-channel applications requiring phase coherency, wideband frequency analysis, high dynamic range, streaming and recording capability
- Radar and satellite: antenna array calibration and test, electronic warfare (EW) radar emulation, passive radar receiver, or multi-band SATCOM monitoring
- RF Communications: Multichannel Baseband-IQ (BBIQ) and wideband MIMO for emerging standards research (e.g. 5G)
- Advanced research large scale experiments in hydrodynamics, plasma fusion (Tokamak/Stellarator), particle physics, or microwave astronomy
Based on the AXIe standard the M9703B is an 8-channel, 12-bit digitizer/wideband digital receiver, able to capture signals from DC up to 2 GHz at 1.6 GS/s. A channel interleaving capability allows waveform acquisition at up to 3.2 GS/s with exceptional measurement accuracy.
The M9703B also provides real-time data processing, large FPGA and customizable I/O interfaces. Detailed explanations can be found in the firmware options section of the datasheet.
The multi-module processing synchronization allows building a system of up to 64 phase-coherent channels with the M9514A 14-slot AXIe chassis; however smaller chassis are also available.




















