How to Test Massive MIMO RF Beamforming

Get quote
mMIMO RF Beamforming Test
+ mMIMO RF Beamforming Test
mMIMO RF Beamforming Test
+ mMIMO RF Beamforming Test

Validating mMIMO radio transceiver performance up to 64 TRX

Implementing dynamic Massive MIMO (mMIMO) RF beamforming involves sophisticated hardware and software algorithms that must be verified throughout the entire 5G radio design workflow. Critical testing phases include antenna array integration and calibration, beam validation from physical RF signals at layer-1 (L1) in uplink and downlink, and layer-1 / layer-2 (L1 / L2) scheduling in single-user and multi-user transceiver modes.

Testing mMIMO RF beamforming radios requires measuring phase- and time-coherent RF signals across all transmit and receive antenna ports simultaneously. Having more mMIMO RF antenna ports typically increases the time and cost of testing. Therefore, the complex multiport RF test system must be calibrated for phase, time, and amplitude. Consistent results across all workflow test stages are essential for cross-correlation and efficient troubleshooting.

Massive MIMO RF beamforming test solution

Implementing dynamic mMIMO RF beamforming requires sophisticated hardware and software algorithms. The Keysight Massive MIMO and MIMO RF Beamforming Test Accelerator for 5G is a scalable, multi-port RF test solution specifically designed and validated for RAN gNodeB and O-RAN Radio Unit (O-RU) testing. Leveraging the advanced E6464A and E6416A Multi Transceiver RF Test Set (MTRX), it provides a comprehensive turnkey solution to significantly accelerate Massive MIMO and MIMO testing throughout the entire 5G radio design workflow, including antenna integration, L1 / L2 beam scheduling, and multi-user beamforming validation.
Get quote

See demo of mMIMO RF beamforming

Explore products in our mMIMO RF beamforming solution

Related use cases

How to Test Time of Flight (ToF) of UWB Devices

Validating ultra-wideband (UWB) devices requires time-of-flight measurements to ensure that the DUT reports signal flight time as expected. Learn how to enable accurate proximity calculations between UWB devices.

Learn more

How to Test Angle of Arrival of UWB Devices

Validating ultra-wideband (UWB) devices requires generating and analyzing wideband signals to confirm their transmit and receive capabilities. Learn how to perform AoA measurements and validate that the DUT reports the correct direction of the signal source.

Learn more

How to Validate LO Leakage in Mixers

Measure and minimize LO leakage in RF mixers using optimized spectrum analyzer sensitivity settings.

Learn more

contact us logo

Get in touch with one of our experts

Need help finding the right solution for you?

Contact us