- Receiver test application for chip-to-chip (C2C) & chip-to-module (C2M) 100GAUI-1, 200GAUI-2, 400GAUI-4 electrical interfaces
- Guided setup, automated stress signal calibration, and pre-compliance measurement according to IEEE 802.3ck standard
- Remote-controlled instruments for test automation and reduced user interaction
- HTML test report
The M8091CKPA receiver test application is designed to assist and simplify the testing of electrical interfaces inputs according to the IEEE 802.3ck C2C and C2M recommendation using a Keysight M8040A 64Gbaud Higher Performance BERT and a Keysight Digital Communication Analyzer (DCA) Oscilloscope. Remote instrument control means all required calibration routines and compliance testing are performed automatically with reduced user interaction.
Interoperability of digital interfaces, following IEEE 802.3ck C2C recommendations, is expressed in terms of Channel Operating Margin (COM). COM is calculated out of channel 4-ports S-parameters and the noise and equalization functionality of the considered transmitter and receiver. Easily execute characterization of the victim lane, computes the amount of broadband noise to be injected in the noise path to test the digital receiver and carries out interference and jitter tolerance testing. Test your devices beyond the standard recommendation with debug mode and quickly adapt to the latest standard changes.
Results of the individual calibration steps and tests are presented in tabular form as well as graphical form where appropriate, which can be stored in projects and recalled at a later point in time. HTML reports are also possible.
Interested in a M8091CKPA?
Featured Resources for M8091CKPA Pre-Compliance Receiver Test Application for IEEE 802.3ck
Data Sheets 2022.05.23
M8091CKPQ Pre-Compliance Receiver Test Application for IEEE 802.3ck
Application Notes 2021.05.28
Conformance Testing of 800G Ethernet Links for the Data Center