Accessories

• Adjust UXR-Series Oscilloscopes up to 110 GHz.
• Ruggedized 1.0 mm Female probe head.
• AutoProbe III interface.
• 3.5 mm Male RF Cable input.
• Probe Head Torque: 10 in-lb.

The Infiniium UXR-Series is the first real-time oscilloscope to offer an optional self-optimization module – capable of performing the frame adjustments to align internal correction constants under site environmental conditions. Optimization modules are available for all UXR-Series bulkhead connector types and supported bandwidths.

A full factory certified calibration consists of frame calibration adjustments, and subsequent testing and performance verification to ensure the oscilloscope is performing to its documented specifications. The optimization module performs only the factory-quality frame adjustment calibration steps. Additional instruments and components are necessary to perform the required horizontal adjustments and vertical performance verification procedures to achieve a full self-verified calibration. If an accredited certified calibration certificate is required, the UXR must be returned to a qualified Keysight service center.

• Adjusts UXR-Series Oscilloscopes with 40 to 70 GHz of bandwidth
• Ruggedized 1.85 mm Female probe head
• AutoProbe III interface
• 3.5 mm Male RF Cable input
• Probe Head Torque: 8 in-lb

The Infiniium UXR-Series is the first real-time oscilloscope to offer an optional self-optimization module – capable of performing the frame adjustments to align internal correction constants under site environmental conditions. Optimization modules are available for all UXR-Series bulkhead connector types and supported bandwidths.

A full factory certified calibration consists of frame calibration adjustments, and subsequent testing and performance verification to ensure the oscilloscope is performing to its documented specifications. The optimization module performs only the factory-quality frame adjustment calibration steps. Additional instruments and components are necessary to perform the required horizontal adjustments and vertical performance verification procedures to achieve a full self-verified calibration. If an accredited certified calibration certificate is required, the UXR must be returned to a qualified Keysight service center.

• Adjusts UXR-Series Oscilloscopes with 10 to 33 GHz of bandwidth
• Ruggedized 3.5 mm Female probe head
• AutoProbe II interface
• 3.5 mm Male RF Cable input
• Probe Head Torque: 8 in-lb

The Infiniium UXR-Series is the first real-time oscilloscope to offer an optional self-optimization module – capable of performing the frame adjustments to align internal correction constants under site environmental conditions. Optimization modules are available for all UXR-Series bulkhead connector types and supported bandwidths.

A full factory certified calibration consists of frame calibration adjustments, and subsequent testing and performance verification to ensure the oscilloscope is performing to its documented specifications. The optimization module performs only the factory-quality frame adjustment calibration steps. Additional instruments and components are necessary to perform the required horizontal adjustments and vertical performance verification procedures to achieve a full self-verified calibration. If an accredited certified calibration certificate is required, the UXR must be returned to a qualified Keysight service center.

Option CDA provides characterized data specific to the serial number of the calibration kit to

• Improve directivity performance
• Provide similar or better accuracy to sliding-load calibration kits
• Offer ease of use eliminating extra steps needed with sliding loads

Designed exclusively for Keysight's vector network analyzers

Option CDA provides characterized data specific to the serial number of the calibration kit to

• Improve directivity performance
• Provide similar or better accuracy to sliding-load calibration kits
• Offer ease of use eliminating extra steps needed with sliding loads

Designed exclusively for Keysight's vector network analyzers

Option CDA provides characterized data specific to the serial number of the calibration kit to

• Improve directivity performance
• Provide similar or better accuracy to sliding-load calibration kits
• Offer ease of use eliminating extra steps needed with sliding loads

Designed exclusively for Keysight's vector network analyzers

Option CDA provides characterized data specific to the serial number of the calibration kit to

• Improve directivity performance
• Provide similar or better accuracy to sliding-load calibration kits
• Offer ease of use eliminating extra steps needed with sliding loads

Designed exclusively for Keysight's vector network analyzers

Option CDA provides characterized data specific to the serial number of the calibration kit to

• Improve directivity performance
• Provide similar or better accuracy to sliding-load calibration kits
• Offer ease of use eliminating extra steps needed with sliding loads

Designed exclusively for Keysight's vector network analyzers

Option CDA provides characterized data specific to the serial number of the calibration kit to:

• Improve directivity performance
• Provide similar or better accuracy to sliding-load calibration kits
• Offer ease of use eliminating extra steps needed with sliding loads

Designed exclusively for Keysight's vector network analyzers.

N9910X RF and microwave handheld accessories complement Keysight's installation and maintenance test tools.

These accessories provide you with a complete solution when using Keysight tools for your measurement needs.

• Broad operating frequency up to 26.5 GHz with a 3.5 mm socket connector.
• High port counts that are scalable to up to 48 ports. 
• Compact footprint enables sharing the electronic calibration (ECal) module in multiple locations.
• Effective at eliminating numerous connections during the calibration process, saving operator time and minimizing errors.
• Compatible with Keysight PXI, PNA, ENA, and Streamline Series vector network analyzers (VNAs) for direct control via USB.

The Keysight N7565A multiport electronic calibration (ECal) module streamlines the calibration process for Keysight vector network analyzers quickly, easily, and accurately. Operating from DC to 26.5 GHz, the multiport ECal module is convenient and supports up to 48 ports, with each module containing six ports. 

The multiport ECal module makes it possible to calibrate a wide frequency range without making numerous connections during the calibration process. The N7565A enables you to share the ECal module across multiple locations because of the compact footprint. You have the flexibility to scale up calibration requirements to meet future demands for higher port counts. 

Use this calibration solution for multiport measurement applications such as high-volume power amplifier / front-end module (PA / FEM), massive multiple-input multiple-output (massive MIMO), or high-speed digital interconnect applications that often come with a higher number of test port requirements.

This ECal module completes a full six-port calibration in half the time and with fewer connections than  traditional mechanical calibration kits. The operator connects the ECal module to the vector network analyzer via the USB, and the firmware controls the rest, minimizing the chance of operator error. Reducing the wear and tear on connectors lowers repair costs for both the test port connectors and calibration standards.

Note: The N7565A multiport ECal does not support calibration with external switches and user characterization.

• Broad operating frequency up to 26.5 GHz with a 3.5 mm socket connector.
• High port counts that are scalable up to 48 ports.
• Compact footprint enables sharing the electronic calibration (ECal) module in multiple locations.
• Effective at eliminating numerous connections during the calibration process, saving operator time and minimizing errors.  
• Compatible with Keysight PXI, PNA, ENA, and Streamline Series vector network analyzers (VNAs) for direct control via USB.

The Keysight N7565AEP multiport ECal streamlines the calibration process for Keysight vector network analyzers quickly, easily, and accurately. Operating from DC to 26.5 GHz, the multiport ECal module is convenient and supports up to 48 ports, with each module containing six ports.

The multiport ECal makes it possible to calibrate a wide frequency range without making numerous connections during the calibration process. The N7565AEP enables you to share the ECal module across multiple locations because of the compact footprint. This ECal enables you to calibrate multiport measurement applications such as high-volume power amplifier / front-end module (PA / FEM), massive multiple-input multiple-output (massive MIMO), or high-speed digital interconnect applications that often come with a higher number of test port requirements.

This ECal module performs a full 12 / 18 / 24 / 30 / 36 / 42 / 48 ports calibration in less than half the time and with fewer connections versus traditional mechanical calibration kits. The operator connects the ECal module to the vector network analyzer via the USB, and the firmware controls the rest, minimizing the chance of operator error. Reducing the wear and tear on connectors lowers repair costs for both the test port connectors and calibration standards.

Note:
The N7565AEP multiport ECal does not support calibration with external switches and user characterization.