Accessories

The Keysight 85065A is a 0.5 mm calibration kit designed for vector network analyzer systems operating over the frequency range of DC to 250 GHz. The open, short, and load standards in this kit are optimized to provide accurate calibrations over the specified frequency range. Three adapters (male-male, male-female and female-female) and torque wrenches for the 0.5 mm connector are also included in this kit.

Improve Your Rx Test System Accuracy by an Order of Magnitude

• Frequency range of 10 MHz - 110 GHz
• Compact, palm-size, USB-powered, and controlled
• Ultra-stable and repeatable, with precision factory cal data inside
• Magnitude and phase corrections with tunable, BPSK comb modulation
• BPSK modulation calibrator

The U9361F RCal receiver calibrator module efficiently increases the accuracy and value of your signal analyzer. It consists of connector-specific calibration standards to detect and correct systematic errors. RCal can correct system path losses and frequency response to accurately measure transmitter characteristics at the output of the device under test.

Seamlessly move the reference plane to the output of the DUT with an easy-to-use, simple command structure. RCal can transfer absolute power accuracy and generate IF flatness corrections (complex magnitude and phase), up to 5 GHz IF bandwidths, and a frequency range up to 110 GHz.

Improve Your Rx Test System Accuracy by an Order of Magnitude

• Frequency range: 10 MHz to 50 GHz
• Compact, palm-size, USB-powered and controlled
• Ultra-stable and repeatable, with precision factory cal data inside
• Magnitude and phase corrections with tunable, BPSK comb modulation
• BPSK modulation calibrator

The U9361F RCal receiver calibrator module efficiently increases the accuracy and value of your signal analyzer. It consists of connector-specific calibration standards to detect and correct systematic errors. RCal can correct system path losses and frequency response to accurately measure transmitter characteristics at the output of the device under test.

Seamlessly move the reference plane to the output of the DUT with an easy-to-use, simple command structure. RCal can transfer absolute power accuracy and generate IF flatness corrections (complex magnitude and phase), up to 5 GHz IF bandwidths, and a frequency range up to 50 GHz.

• Type-N (m), 50 ohm, open, short, load, and through
• DC to 18 GHz
• Open phase error: 0 to 6 GHz ≤ 2.0°, 6 to 9 GHz ≤ 3.0°, 9 to 18 GHz ≤ 4.0°
• Short phase error: 0 to 6 GHz ≤ 1.5°, 6 to 9 GHz ≤ 2.5°,9 to 18 GHz ≤ 3.0°
• Load return loss: 0 to 6 GHz ≥ 42 dB, 6 to 9 GHz, ≥ 35 dB, 9 to 18 GHz, ≥ 32 dB
• Dimensions: H x W x D ~ 106 x 72 x 22 mm

The 85518A 4-in-1 mechanical calibration module combines an open, short, load, and through in a compact unit. The product is small, easy to handle, and light weight. The through allows users to easily calibrate non-insertable devices, such as a cable or filter with male-male connectors. During the "thru" part of the calibration, the 85518A through can be used.

For more information about calibration kits, please visit Mechanical and Electronic Calibration Kits.

• Type-N (f), 50 ohm, open, short, load, and through
• DC to 18 GHz
• Open phase error: 0 to 6 GHz ≤ 2.0°, 6 to 9 GHz ≤ 3.0°, 9 to 18 GHz ≤ 4.0°
• Short phase error: 0 to 6 GHz ≤ 1.5°, 6 to 9 GHz ≤ 2.5°,9 to 18 GHz ≤ 3.0°
• Load return loss: 0 to 6 GHz ≥ 42 dB, 6 to 9 GHz, ≥ 35 dB, 9 to 18 GHz, ≥ 32 dB
• Dimensions: H x W x D ~ 121 x 89 x 22 mm

The 85519A 4-in-1 mechanical calibration module combines an open, short, load, and through in a compact unit. The product is small, easy to handle, and light weight. The through allows users to easily calibrate non-insertable devices, such as a cable or filter with female-female connectors. During the "thru" part of the calibration, the 85519A through can be used.

For more information about calibration kits, please visit Mechanical and Electronic Calibration Kits.

• Adjust UXR-Series Oscilloscopes up to 110 GHz.
• Ruggedized 1.0 mm Female probe head.
• AutoProbe III interface.
• 3.5 mm Male RF Cable input.
• Probe Head Torque: 10 in-lb.

The Infiniium UXR-Series is the first real-time oscilloscope to offer an optional self-optimization module – capable of performing the frame adjustments to align internal correction constants under site environmental conditions. Optimization modules are available for all UXR-Series bulkhead connector types and supported bandwidths.

A full factory certified calibration consists of frame calibration adjustments, and subsequent testing and performance verification to ensure the oscilloscope is performing to its documented specifications. The optimization module performs only the factory-quality frame adjustment calibration steps. Additional instruments and components are necessary to perform the required horizontal adjustments and vertical performance verification procedures to achieve a full self-verified calibration. If an accredited certified calibration certificate is required, the UXR must be returned to a qualified Keysight service center.

• Adjusts UXR-Series Oscilloscopes with 40 to 70 GHz of bandwidth
• Ruggedized 1.85 mm Female probe head
• AutoProbe III interface
• 3.5 mm Male RF Cable input
• Probe Head Torque: 8 in-lb

The Infiniium UXR-Series is the first real-time oscilloscope to offer an optional self-optimization module – capable of performing the frame adjustments to align internal correction constants under site environmental conditions. Optimization modules are available for all UXR-Series bulkhead connector types and supported bandwidths.

A full factory certified calibration consists of frame calibration adjustments, and subsequent testing and performance verification to ensure the oscilloscope is performing to its documented specifications. The optimization module performs only the factory-quality frame adjustment calibration steps. Additional instruments and components are necessary to perform the required horizontal adjustments and vertical performance verification procedures to achieve a full self-verified calibration. If an accredited certified calibration certificate is required, the UXR must be returned to a qualified Keysight service center.

• Adjusts UXR-Series Oscilloscopes with 10 to 33 GHz of bandwidth
• Ruggedized 3.5 mm Female probe head
• AutoProbe II interface
• 3.5 mm Male RF Cable input
• Probe Head Torque: 8 in-lb

The Infiniium UXR-Series is the first real-time oscilloscope to offer an optional self-optimization module – capable of performing the frame adjustments to align internal correction constants under site environmental conditions. Optimization modules are available for all UXR-Series bulkhead connector types and supported bandwidths.

A full factory certified calibration consists of frame calibration adjustments, and subsequent testing and performance verification to ensure the oscilloscope is performing to its documented specifications. The optimization module performs only the factory-quality frame adjustment calibration steps. Additional instruments and components are necessary to perform the required horizontal adjustments and vertical performance verification procedures to achieve a full self-verified calibration. If an accredited certified calibration certificate is required, the UXR must be returned to a qualified Keysight service center.

Option CDA provides characterized data specific to the serial number of the calibration kit to

• Improve directivity performance
• Provide similar or better accuracy to sliding-load calibration kits
• Offer ease of use eliminating extra steps needed with sliding loads

Designed exclusively for Keysight's vector network analyzers

Option CDA provides characterized data specific to the serial number of the calibration kit to

• Improve directivity performance
• Provide similar or better accuracy to sliding-load calibration kits
• Offer ease of use eliminating extra steps needed with sliding loads

Designed exclusively for Keysight's vector network analyzers

Option CDA provides characterized data specific to the serial number of the calibration kit to

• Improve directivity performance
• Provide similar or better accuracy to sliding-load calibration kits
• Offer ease of use eliminating extra steps needed with sliding loads

Designed exclusively for Keysight's vector network analyzers

Option CDA provides characterized data specific to the serial number of the calibration kit to

• Improve directivity performance
• Provide similar or better accuracy to sliding-load calibration kits
• Offer ease of use eliminating extra steps needed with sliding loads

Designed exclusively for Keysight's vector network analyzers