측정 기초 | 키사이트

검색 결과 페이지입니다. . 추천 검색 결과 보기:

측정 및 엔지니어링 계측에 관한 공학적 지식

계측 및 측정 전문가와 함께 디지털 및 RF 설계와 테스트에 대한 이해도를 높일 수 있습니다. 기초적인 RF 측정, 설계, 시뮬레이션 기법을 알아보십시오. 기가비트 디지털 설계 관련 문제점들을 해결할 수 있는 방법을 살펴보십시오. 디지털 및 RF 측정 동영상, 어플리케이션 노트, 기술 세미나, 기술/제품 동영상을 확인하십시오.

최신 RF 기술 리소스 확인

최신 디지털 기술 리소스 확인

측정 기초

키사이트의 계측 역량을 기반으로 자신 있게 모든 측정을 수행하십시오.

계측 및 측정 역량으로 측정 신뢰도 확보

Measurement Confidence

계측기 사양을 검증하는 키사이트 교정 절차를 통해 모든 측정이 계량 표준 기관(NMI: National Metrology Institute)의 기준에 맞는지 추적할 수 있습니다.

키사이트가 제공하는 고급 계측 역량 활용

Advanced Metrology

NMI와 함께 엔지니어링 계측과 새로운 기술에 대한 엄격한 측정 기법을 개발하기 위해 노력하는 키사이트 엔지니어들을 믿고 활용해 보십시오.

계측 및 측정을 지원하는 엔지니어링 계측

Metrology Expertise

여러 국제표준화기구와 협업하는 키사이트 계측 전문가들과의 협력으로, 변화하는 규정 준수 요건과 실제 어플리케이션에 대한 최신 정보를 놓치지 마십시오.

계측 이벤트

다가오는 이벤트에 참여하여 정보를 습득하고 계측 네트워크를 확장해 보십시오.

측정 불확도와 측정 위험에 대해 알아보기

White Paper 2018-12-08

Uncertainty Analysis for Uncorrelated Input Quantities and a Generalization

Uncertainty Analysis for Uncorrelated Input Quantities and a Generalization

This paper provides an overview on how to use the Guide to the Expression of Uncertainty in Measurement (GUM) for uncorrelated input quantities.

2018-12-08

White Paper 2019-01-05

Revisiting Mismatch Uncertainty with the Rayleigh Distribution

Revisiting Mismatch Uncertainty with the Rayleigh Distribution

This paper examines several important aspects of estimating mismatch uncertainty, which is often a major component of the total uncertainty for RF and microwave measurements.

2019-01-05

White Paper 2018-12-06

Establishing Traceability for Quantities Derived from Multiple Traceable Quantities

Establishing Traceability for Quantities Derived from Multiple Traceable Quantities

This paper presents an approach of establishing traceability for a quantity by starting with the concepts of International System of Units (SI), base and derived quantities, and traceability.

2018-12-06

Application Note 2018-12-12

Using Calibration to Optimize Performance in Crucial Measurements

Using Calibration to Optimize Performance in Crucial Measurements

This application covers two goals: help you ensure that you get the calibration you expect (and deserve), and help you improve effective measurement performance through innovative use of calibration.

2018-12-12

White Paper 2018-12-03

Calibration Process Innovation Using Non-Required Guard Banded Testing

Calibration Process Innovation Using Non-Required Guard Banded Testing

Calibration services vary as to how to set the acceptance limits compared to the required tolerance (i.e., specification). Using a guard band to reduce the acceptance limit will increase the confidence in the calibration.

2018-12-03

White Paper 2018-12-06

Isolating Frequency Measurement Error and Sourcing Frequency Error Near the Reference Frequency Harmonics

Isolating Frequency Measurement Error and Sourcing Frequency Error Near the Reference Frequency Harmonics

Learn a methodology to separate the analyzing error from the sourcing error when two frequencies are close to each other.

2018-12-06

White Paper 2018-12-14

Using a Manufacturer's Specification as a Type B Error Contribution

Using a Manufacturer's Specification as a Type B Error Contribution

To better understand the implications of using manufacturers’ specifications in an uncertainty analysis, multiple technical topics are explored.

2018-12-14

Application Note 2018-12-04

Understanding Measurement Risk

Understanding Measurement Risk

This paper explains the probability density functions from a Monte Carlo simulation to demonstrate the relationship between a device’s true value and the corresponding measured value.

2018-12-04

White Paper 2018-12-12

A Guard-Band Strategy for Managing False-Accept Risk

A Guard-Band Strategy for Managing False-Accept Risk

This paper presents a guard-band strategy for managing false-accept risk with only limited knowledge of the a priori probability that a device is intolerance.

2018-12-12

White Paper 2018-12-12

Language of Specifications

Language of Specifications

This paper explains some of the arcane language used in describing a product's characteristics.

2018-12-12

White Paper 2018-12-14

ATE System Level Calibration and Its Impact on Cost, Quality and Schedule

ATE System Level Calibration and Its Impact on Cost, Quality and Schedule

This paper proposes an alternative method to provide system level specification and system measurement calibration which will extend the system's ability to be used for multiple products.

2018-12-14

Application Note 2018-12-18

Calculating Uncertainty using Digital Multimeter Ratio Measurement Techniques

Calculating Uncertainty using Digital Multimeter Ratio Measurement Techniques

Learn three digital multimeter ratio measurement techniques for determining the traceable value and measurement uncertainty of an unknown input.

2018-12-18

White Paper 2018-12-17

Specifications Guidelines

Specifications Guidelines

Keysight Technologies has definitions for its test and measurement product specifications and what they represent. You will learn in this technical overview terminology and manufacturing recommendations.

2018-12-17

전자 테스트 및 측정 기초

여기서 측정 기법에 대한 어플리케이션 노트, 세미나, 교육 강의를 찾아보고 키사이트 포럼을 방문하여 최신 토론을 확인하십시오.

추가 자료

측정 불확도 계산

측정 전문가를 위한 무료 표준

네트워크 분석

다른 도움이 필요십니까?

키사이트에 문의하기