Accessories

The SP0631A PXIe Switch PCIe cable adapter card is designed to create a flexible and scalable PXIe fabric solutio

Features

• PXIe System Module - Gen 4 x16 PCIe cable adapter
  
• 24 Lane PCIe backplane ports
• Up to 16 GT/s per PCIe lane
• 100 ns port latency
• Transparent PXIe expansion
• PCIe 4.0 and PXIE-1 rev 2.3 and PXISA PCIE-5 Hardware specification 1.1 compliance
• Quad SFF-8644 x4 cable ports
• Copper cable and fiber-optic cable support 0.5 to 100 meters

Capabilities and features:

• PCIe Gen4 x4 CMI copper cable

• Cable length of 1 meter
• Conforms to the mechanical dimensioning requirements of SFF-8644
• PCIe external cabling specification compliant
• x4 PCIe Gen 4 support
• 2 EEPROMs
• 100 Ohm cable PVC
• RoHS compliant

Features and capabilities:

• Wide operation range up to 3 kV/1500 A
• Fully automated fast thermal test from -50 °C to +250 °C
• Automatic power device (semiconductor and component) datasheet creation
• Auto record function to prevent data loss
• Fiber optic cable that enables connecting systems and I/O subsystems
• Conforms to the mechanical dimensioning requirements of SFF-8644 
• Compliant to SFF-8636
• x4 PCIe Gen 4 support
• 12 strand fiber
• Minimum bending radius of 30mm 
• 2 EEPROMs
• ROHS II compliant

The SP0632A PXIe Peripheral Module is designed to create a flexible and scalable CompactPCI Express/PXIe expansion solution. The SP0632A enables connectivity to other PXIe chassis utilizing the SP0631A PXIe switch card. 

Features

• PXIe Gen4 Transparent Peripheral Module
• 8 lane PCIe backplane ports
• Up to 16 GT/s per lane
• 100 ns port latency
• Transparent PXIe expansion
• Two SFF-8644 x4 cable ports
• Copper cable and fiber-optic cable support 0.5 to 100 meters
• 3U rack mountable

The SP0630A Gen4 Host/Target Adapter is a high-performance transparent solution for connecting servers to external I/O subsystems. For high performance applications, the SP0630A delivers flexibility and performance with extremely high data quality. 

Features

• PCIe Card - Gen4 x16 PCIe Transparent Host / Target Adapter
• PCI Express® 4.0 compliant - 16.0 GT/s per lane
• Link compliant with Gen1, Gen2, Gen3 and Gen4 PCI Express
• PCIe 4.0 cables
  
• Quad SFF-8644 x4 Gen4 PCI Express NTB cable ports that can be configured as:
  • One - x16 PCI Express port
  • Two - x8 PCI Express ports
  • Four - x4 PCI Express ports
• Supports both copper and fiber-optic cables
  
• Host clock isolation support
  
• Low profile PCI Express form factor
  
• Dual EEPROM / Flash for safe custom system configuration

The RP5903C Parallel Kit enables parallel operation of multiple RP5900 series regenerative DC power supplies and EL4900 series DC electronic loads. It includes a fiber optic cable and a transmitter module for reliable communication and synchronization.

NoteRP5903C is not available for sale in South Korea

The RP5902C Interface Board enables analog and RS-232 connections for the RP5900 series regenerative DC power supplies and EL4900 series DC electronic loads. It’s suitable for applications requiring flexible control or integration with legacy systems.

The RP5901C Interface Board provides GPIB communication for RP5900 series regenerative DC power supplies and EL4900 series DC electronic loads. It enables standardized remote control and monitoring through the GPIB interface.

• Module plugs into rear-panel expansion slot.
• Combines 10/100Mbit LAN port with VGA out.
• LAN port is LXI compliant, enabling remote access, command, and printing.
• Compatible with VNC viewer for secure access.
• Web browser-based interface allows remote control -- ideal for accessing remote R&D and teaching labs.

LAN/VGA module gives you network connectivity and complete LXI compliant support as well as the ability to connect to an external monitor. Operate your scope remotely from your PC using the web browser interface with the virtual front panel interface that looks and acts as the real front panel on the scope with the same associated keys and knobs. Oscilloscope is required.

• Module plugs into rear panel expansion slot.
• The GPIB provides handshaking and interface communications over an 8 bit data bus.

GPIB (also known as IEEE-488 or HPIB) is a standard for instrumentation communication and control and used by many manufacturers.

The DSOX2000-806 product is discontinued the replacement is the DSOXGPIB.

Wide frequency range coverage

• Option U5532C-504: 100 kHz to 4.2 GHz (Type-N input connector, male)
• Option U5532C-518: 10 MHz to 18 GHz (Type-N input connector, male)
• Option U5532C-526: 10 MHz to 26.5 GHz (3.5 mm input connector, male)
• Option U5532C-550: 30 MHz to 50 GHz (2.4 mm input connector, male)

Large RF power range

• -10 dBm up to +30 dBm for absolute RF power measurements (wideband)
• Down to -140 dBm for absolute tuned RF level (TRFL) measurements

Metrology-grade accuracies

• As low as 0.0096 dB typical measurement uncertainty for absolute power measurement

Simplified configuration

• USB-sensor based design eliminates the external power meter
• Single RF input connector to ensure the measurement integrity
• Key component for the N5531X “one-box” measuring receiver configuration
• New feature of “on-board” calibration file enables cal factor auto-retrieval

The U5532C USB power sensor module is specially design for the N5531X measuring receiver. Based on the Keysight USB power sensor and a power splitter, the U5532C provides the N5531X measuring receiver user with a single RF input device covering up to 50 GHz. Using of the U5532C USB power sensor module eliminates the requirement of an external power meter, simplifying the setup process and saving lab space. The measurement integrity and accuracy are guaranteed by the fully defined specification sets. The traceability of measurement uncertainties is also ensured.

The newly introduced feature of “on-board” calibration file (for the U5532C with serial number prefix MY/SG6013 or higher) automatically retrieves the cal factors stored inside each U5532C sensor module. This makes the U5532C a truly “plug-n-play” USB device minimizing the human errors and saving operator’s precious time.

• Remote access and control of GPIB, USB and RS-232 instruments via LAN in one-box solution
• Faster GPIB transfer rate of up to 1.2 MB/s
• Supports 1000BASE-T (1 Gigabit)/100BASE-TX/10BASE-T LAN/Ethernet connection
• Password-protected web interface for configuration
• Built-in LCD display and Web browser for easy setup and use
• Power switch for hard reset

The E5810B is the next generation of the E5810A and provides a gateway between networked-equipped computer systems (using LAN) and GPIB, USB and RS-232 instruments in one-box connectivity solution. With this gateway, multiple users can share the instruments from different locations via a LAN (1000BASE-T(1Gigabit)/100BASE-TX/10BASE-T)