Wir denken, das dies die Seite ist, die Sie sehen wollten.. Stattdessen Suchergebnisse ansehen:

Können wir Ihnen behilflich sein?

MXG Signal Generator UXA Signal Analyzer PXA Signal Analyzer Eine Lösung finden Technische Unterstützung An einem Training teilnehmen Unsere Teilnahme an Veranstaltungen finden Hochwertige Gebrauchtgeräte KeysightCare Online Kauf

No product matches found - System Exception

N1085A PAM-4 Measurement Application for Ethernet and OIF-CEI

Produkt Status

Obsolete

Technische Unterstützung

Datenblatt herunterladen

Ersatzprodukt

N109256CB Electrical TX Test SW for OIF-CEI-4.0

Produktdetails anzeigen

Optionen für Kauf oder Mieten

N1091BSCB Electrical TX Test SW for IEEE 802.3bs/cd

Produktdetails anzeigen

Optionen für Kauf oder Mieten

Überblick und Leistungsmerkmale
Upgrades nach dem Kauf
Ressourcen

HIGHLIGHTS

Comprehensive measurement and debug solution

Performs PAM-4 measurements as outlined in draft documents for OIF-CEI 4.0 and IEEE 400G (P802.3bs)
Performs more than 25 tests
Level-based (noise, linearity), eye-based (EW6, EH6), jitter, and return loss tests

Flexible and extensible

Operates on 86100D DCA-X oscilloscopes or your personal computer
Control your device under test (DUT) and other equipment
Test all or selected parameters to compliance limits (proposed in draft specification document) or custom limits

Compatibility

86100D Infiniium DCA-X mainframe

Reduce your test time from hours to minutes. Use the Keysight N1085A software application with your 86100D DCA-X Series oscilloscope to measure your Pulse Amplitude Modulation 4-Level (PAM-4) design according to the measurements outlined in draft standards such as;

OIF-CEI-56G-VSR-PAM4 Very Short Reach Interface
IEEE 400G (P802.3bs)

Performs more than 25 tests including:

Level-based measurements (using linearity pattern)
- Voltage levels
- Level thickness (rms)
- Level separation mismatch ratio (RLM), including Smin, Vavg, ES1, ES2
Output voltage tests
- Differential pk-pk (Tx enabled/disabled)
- AC common-mode output voltage
- DC common-mode output voltage
Output waveform measurements
- Steady-state voltage, Vf
- Linear fit pulse peak
- Signal-to-noise-and-distortion ratio (SNDR)
- Normalized coefficient step size
- Full-scale range tests
Return loss measurements using N1055A TDR or ENA/PNA

Sortieren nach :

Datum

Datum Titel

Filter Results

No information found for this product

Zurücksetzen

Nach Inhaltsart